1 
#@TYPE: Machine
2 
#@Name: FriendlyARM micro2440
3 
#@DESCRIPTION: Machine configuration for FriendlyARM micro2440 Samsung 2440 based board
4 





5

TARGET_ARCH = "arm"





6






7

IMAGE_DEVICE_TABLES = "files/device_table-minimal.txt \





8

                       files/device_table_add-s3c_serial.txt"





9






10

PREFERRED_VERSION_u-boot = "git"





11

UBOOT_MACHINE = "mini2440_config"





12

UBOOT_ENTRYPOINT = "30008000"





13






14

PREFERRED_PROVIDER_virtual/kernel = "linux-mini2440"





15






16

# This can be used as alternative, stable kernel





17

# PREFERRED_PROVIDER_virtual/kernel = "linux"





18

# PREFERRED_VERSION_linux = "2.6.29"





19






20






21

# This is not necessarily true, there is a 800x480 display as well





22

MACHINE_DISPLAY_WIDTH_PIXELS = "240"





23

MACHINE_DISPLAY_HEIGHT_PIXELS = "320"





24

MACHINE_DISPLAY_ORIENTATION = "0"





25

MACHINE_DISPLAY_PPI = "110"





26

# used by matchbox-panel large icons look ok on both displays





27

GUI_MACHINE_CLASS = "bigscreen"





28






29

# used by sysvinit





30

SERIAL_CONSOLE = "115200 ttySAC0"





31






32

IMAGE_FSTYPES = "jffs2 tar.gz"





33






34

MACHINE_FEATURES = "kernel26 touchscreen screen usbhost usbgadget sound alsa ethernet mmc mmcroot i2c spi"





35

MACHINE_EXTRA_RDEPENDS = "rt73-firmware"





36






37

require conf/machine/include/tune-arm920t.inc





38






39

KERNEL_IMAGETYPE = "uImage"





40

EXTRA_IMAGECMD_jffs2 = "--pad --little-endian -e16KiB -n \





41

        ; sumtool -e16KiB --no-cleanmarkers \





42

        --littleendian --pad \





43

        -i ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 \





44

        -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2.summary"