# DIST: This is the distribution Makefile for Emacs.  configure can

# DIST: make most of the changes to this file you might want, so try

# DIST: that first.

# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,

#   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009

#   Free Software Foundation, Inc.

# This file is part of GNU Emacs.

# GNU Emacs is free software: you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation, either version 3 of the License, or

# (at your option) any later version.

# GNU Emacs is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License

# along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.

### Commentary:

# make all	to compile and build Emacs.

# make install	to install it.

# make TAGS	to update tags tables.

#

# make clean  or  make mostlyclean

#      Delete all files from the current directory that are normally

#      created by building the program.	 Don't delete the files that

#      record the configuration.  Also preserve files that could be made

#      by building, but normally aren't because the distribution comes

#      with them.

#

#      Delete `.dvi' files here if they are not part of the distribution.

#

# make distclean

#      Delete all files from the current directory that are created by

#      configuring or building the program.  If you have unpacked the

#      source and built the program without creating any other files,

#      `make distclean' should leave only the files that were in the

#      distribution.

#

# make maintainer-clean

#      Delete everything from the current directory that can be

#      reconstructed with this Makefile.  This typically includes

#      everything deleted by distclean, plus more: .elc files,

#      C source files produced by Bison, tags tables, info files,

#      and so on.

#

# make extraclean

#      Still more severe - delete backup and autosave files, too.

#

# make bootstrap

#      Removes all the compiled files to force a new bootstrap from a

#      clean slate, and then build in the normal way.

SHELL = /bin/sh

# This may not work with certain non-GNU make's.  It only matters when

# inheriting a CDPATH not starting with the current directory.

CDPATH=

# If Make doesn't predefine MAKE, set it here.

@SET_MAKE@

# ==================== Things `configure' Might Edit ====================

CC=@CC@

CPP=@CPP@

C_SWITCH_SYSTEM=@c_switch_system@

ALLOCA=@ALLOCA@

LN_S=@LN_S@

CFLAGS=@CFLAGS@

LDFLAGS=@LDFLAGS@

CPPFLAGS=@CPPFLAGS@

C_SWITCH_X_SITE=@C_SWITCH_X_SITE@

LD_SWITCH_X_SITE=@LD_SWITCH_X_SITE@

EXEEXT=@EXEEXT@

MAKEINFO=@MAKEINFO@

### These help us choose version- and architecture-specific directories

### to install files in.

### This should be the number of the Emacs version we're building,

### like `18.59' or `19.0'.

version=@version@

### This should be the name of the configuration we're building Emacs

### for, like `mips-dec-ultrix' or `sparc-sun-sunos'.

configuration=@configuration@

# ==================== Where To Install Things ====================

# The default location for installation.  Everything is placed in

# subdirectories of this directory.  The default values for many of

# the variables below are expressed in terms of this one, so you may

# not need to change them.  This defaults to /usr/local.

prefix=@prefix@

# Like `prefix', but used for architecture-specific files.

exec_prefix=@exec_prefix@

# Where to install Emacs and other binaries that people will want to

# run directly (like etags).

bindir=@bindir@

# The root of the directory tree for read-only architecture-independent

# data files.  ${datadir}, ${infodir} and ${mandir} are based on this.

datarootdir=@datarootdir@

# Where to install architecture-independent data files.	 ${lispdir}

# and ${etcdir} are subdirectories of this.

datadir=@datadir@

# Where to install and expect the files that Emacs modifies as it

# runs.  These files are all architecture-independent.

# Right now, this is not used.

sharedstatedir=@sharedstatedir@

# Where to install and expect executable files to be run by Emacs

# rather than directly by users, and other architecture-dependent

# data.	 ${archlibdir} is a subdirectory of this.

libexecdir=@libexecdir@

# Where to install Emacs's man pages.

# This used to allow choice of the numeric extension, but this made

# little sense since the files were always installed in man1/

# (and they contain cross-references that expect them to be there).

mandir=@mandir@

man1dir=$(mandir)/man1

MAN_PAGES=b2m.1 ctags.1 ebrowse.1 emacs.1 emacsclient.1 etags.1 \

          grep-changelog.1 rcs-checkin.1

# Where to install and expect the info files describing Emacs.	In the

# past, this defaulted to a subdirectory of ${prefix}/lib/emacs, but

# since there are now many packages documented with the texinfo

# system, it is inappropriate to imply that it is part of Emacs.

infodir=@infodir@

INFO_FILES=ada-mode auth autotype calc ccmode cl dbus dired-x ebrowse	\

           ediff efaq eintr elisp emacs emacs-mime epa erc eshell eudc	\

           flymake forms gnus idlwave info mairix-el message mh-e	\

           newsticker nxml-mode org pcl-cvs pgg rcirc reftex remember	\

           sasl sc ses sieve smtpmail speedbar tramp url vip viper	\

           widget woman

# Directory for local state files for all programs.

localstatedir=@localstatedir@

# Where to look for bitmap files.

bitmapdir=@bitmapdir@

# Where to find the source code.  The source code for Emacs's C kernel is

# expected to be in ${srcdir}/src, and the source code for Emacs's

# utility programs is expected to be in ${srcdir}/lib-src.  This is

# set by the configure script's `--srcdir' option.

# We use $(srcdir) explicitly in dependencies so as not to depend on VPATH.

srcdir=@srcdir@

# Where the manpage source files are kept.

mansrcdir=$(srcdir)/doc/man

# Tell make where to find source files; this is needed for the makefiles.

VPATH=@srcdir@

# Where to find the application default.

x_default_search_path=@x_default_search_path@

# Location to install Emacs.app under NeXT/Open/GNUstep / Cocoa

ns_appdir=@ns_appdir@

ns_appbindir=@ns_appbindir@

ns_appresdir=@ns_appresdir@

# Where the etc/emacs.desktop file is to be installed.

desktopdir=$(datarootdir)/applications

# Where the etc/images/icons/hicolor directory is to be installed.

icondir=$(datarootdir)/icons

# The source directory for the icon files.

iconsrcdir=$(srcdir)/etc/images/icons

# ==================== Emacs-specific directories ====================

# These variables hold the values Emacs will actually use.  They are

# based on the values of the standard Make variables above.

# Where to install the lisp files distributed with

# Emacs.  This includes the Emacs version, so that the

# lisp files for different versions of Emacs will install

# themselves in separate directories.

lispdir=@lispdir@

# Directories Emacs should search for lisp files specific

# to this site (i.e. customizations), before consulting

# ${lispdir}.  This should be a colon-separated list of

# directories.

locallisppath=@locallisppath@

# Where Emacs will search to find its lisp files.  Before

# changing this, check to see if your purpose wouldn't

# better be served by changing locallisppath.  This

# should be a colon-separated list of directories.

lisppath=@lisppath@

# Where Emacs will search for its lisp files while

# building.  This is only used during the process of

# compiling Emacs, to help Emacs find its lisp files

# before they've been installed in their final location.

# It's usually identical to lisppath, except that

# it does not include locallisppath, and the

# entry for the directory containing the installed lisp

# files has been replaced with ../lisp.  This should be a

# colon-separated list of directories.

buildlisppath=${srcdir}/lisp

# Where to install the other architecture-independent

# data files distributed with Emacs (like the tutorial,

# the cookie recipes and the Zippy database). This path

# usually contains the Emacs version number, so the data

# files for multiple versions of Emacs may be installed

# at once.

etcdir=@etcdir@

# Where to put executables to be run by Emacs rather than

# the user.  This path usually includes the Emacs version

# and configuration name, so that multiple configurations

# for multiple versions of Emacs may be installed at

# once.

archlibdir=@archlibdir@

# Where to put the docstring file.

docdir=@docdir@

# Where to install Emacs game score files.

gamedir=@gamedir@

# ==================== Utility Programs for the Build ====================

# Allow the user to specify the install program.

INSTALL = @INSTALL@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_DATA = @INSTALL_DATA@

INSTALL_INFO = @INSTALL_INFO@

# By default, we uphold the dignity of our programs.

INSTALL_STRIP =

# We use gzip to compress installed .el files.

GZIP_PROG = @GZIP_PROG@

# ============================= Targets ==============================

# Program name transformation.

TRANSFORM = @program_transform_name@

# What emacs should be called when installed.

EMACS = `echo emacs${EXEEXT} | sed '$(TRANSFORM)'`

EMACSFULL = `echo emacs-${version}${EXEEXT} | sed '$(TRANSFORM)'`

# Subdirectories to make recursively.  `lisp' is not included

# because the compiled lisp files are part of the distribution.

# leim is not included because it needs special handling.

# 

# Actually, we now include `lisp' as well, since the compiled files

# are not included any more in case of bootstrap or in case Emacs was

# checked out from a VCS.

SUBDIR = lib-src src lisp

# The subdir makefiles created by config.status.

SUBDIR_MAKEFILES = lib-src/Makefile doc/emacs/Makefile doc/misc/Makefile doc/lispref/Makefile doc/lispintro/Makefile src/Makefile oldXMenu/Makefile lwlib/Makefile leim/Makefile lisp/Makefile

# Subdirectories to install, and where they'll go.

# lib-src's makefile knows how to install it, so we don't do that here.

# leim's makefile also knows how to install it, so we don't do that here.

# When installing the info files, we need to do special things to

# avoid nuking an existing dir file, so we don't do that here;

# instead, we have written out explicit code in the `install' targets.

COPYDIR = ${srcdir}/etc ${srcdir}/lisp

COPYDESTS = $(DESTDIR)${etcdir} $(DESTDIR)${lispdir}

all: ${SUBDIR} leim

removenullpaths=sed -e 's/^://g' -e 's/:$$//g' -e 's/::/:/g'

# Generate epaths.h from epaths.in.  This target is invoked by `configure'.

epaths-force: FRC

	@(lisppath=`echo ${lisppath} | ${removenullpaths}` ;		\

	  buildlisppath=`echo ${buildlisppath} | ${removenullpaths}` ;	\

	  x_default_search_path=`echo ${x_default_search_path}`; \

	  gamedir=`echo ${gamedir}`; \

	  sed < ${srcdir}/src/epaths.in > epaths.h.$$$$		\

	  -e 's;\(#.*PATH_LOADSEARCH\).*$$;\1 "'"$${lisppath}"'";'	\

	  -e 's;\(#.*PATH_DUMPLOADSEARCH\).*$$;\1 "'"$${buildlisppath}"'";' \

	  -e 's;\(#.*PATH_EXEC\).*$$;\1 "${archlibdir}";'		\

	  -e 's;\(#.*PATH_INFO\).*$$;\1 "${infodir}";'			\

	  -e 's;\(#.*PATH_DATA\).*$$;\1 "${etcdir}";'			\

	  -e 's;\(#.*PATH_BITMAPS\).*$$;\1 "${bitmapdir}";'		\

	  -e 's;\(#.*PATH_X_DEFAULTS\).*$$;\1 "${x_default_search_path}";' \

	  -e 's;\(#.*PATH_GAME\).*$$;\1 "${gamedir}";' \

	  -e 's;\(#.*PATH_DOC\).*$$;\1 "${docdir}";' \

	  -e 's;/[*] *arch-tag:.*;/*;') &&		\

	${srcdir}/move-if-change epaths.h.$$$$ src/epaths.h

# For parallel make, src should be built before leim.

# "export PARALLEL=0" is for SGI's Make, to prevent it from

# running more than 1 process in the leim directory, especially for

# the $TIT files there.

leim:   src Makefile FRC

	(export PARALLEL; PARALLEL=0; cd $@; $(MAKE) all $(MFLAGS) \

	  CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \

	  LDFLAGS='${LDFLAGS}' MAKE='${MAKE}')

src:	lib-src FRC

.RECURSIVE: ${SUBDIR} leim

# We need to build `emacs' in `src' to compile the *.elc files in `lisp'.

lisp: src

# These targets should be "${SUBDIR} without `src'".

lib-src lisp: Makefile FRC

	cd $@; $(MAKE) all $(MFLAGS)                           \

	  CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \

	  LDFLAGS='${LDFLAGS}' MAKE='${MAKE}'

# Pass to src/Makefile.in an additional BOOTSTRAPEMACS variable which

# is either set to bootstrap-emacs (in case bootstrap-emacs has not been

# constructed yet) or the empty string (otherwise).

# src/Makefile.in uses it to implement conditional dependencies, so that

# files that need bootstrap-emacs to be built do not additionally need

# to be kept fresher than bootstrap-emacs.  Otherwise changing a single

# file src/foo.c forces dumping a new bootstrap-emacs, then re-byte-compiling

# all preloaded elisp files, and only then dump the actual src/emacs, which

# is not wrong, but is overkill in 99.99% of the cases.

src: Makefile FRC

	boot=bootstrap-emacs$(EXEEXT);                         \

	if [ ! -x "src/$$boot" ]; then                                     \

	    cd $@; $(MAKE) all $(MFLAGS)                                   \

	      CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}'         \

	      LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS="$$boot"; \

	fi;

	cd $@; $(MAKE) all $(MFLAGS)                           \

	  CC='${CC}' CFLAGS='${CFLAGS}' CPPFLAGS='${CPPFLAGS}' \

	  LDFLAGS='${LDFLAGS}' MAKE='${MAKE}' BOOTSTRAPEMACS=""

blessmail: Makefile src FRC

	cd lib-src; $(MAKE) maybe-blessmail $(MFLAGS) \

	  MAKE='${MAKE}' archlibdir='$(archlibdir)'

# We used to have one rule per */Makefile.in, but that leads to race

# conditions with parallel makes, so let's assume that the time stamp on

# ./Makefile is representative of the time stamp on all the other Makefiles.

Makefile: config.status $(srcdir)/src/config.in \

          $(srcdir)/Makefile.in \

          $(srcdir)/src/Makefile.in \

          $(srcdir)/lib-src/Makefile.in \

          $(srcdir)/doc/emacs/Makefile.in \

          $(srcdir)/doc/misc/Makefile.in \

          $(srcdir)/doc/lispref/Makefile.in \

          $(srcdir)/doc/lispintro/Makefile.in \

          $(srcdir)/oldXMenu/Makefile.in \

          $(srcdir)/lwlib/Makefile.in \

          $(srcdir)/leim/Makefile.in \

          $(srcdir)/lisp/Makefile.in

	./config.status

config.status: ${srcdir}/configure ${srcdir}/lisp/version.el

	./config.status --recheck

AUTOCONF_INPUTS = @MAINT@ $(srcdir)/configure.in $(srcdir)/m4/getopt.m4

$(srcdir)/configure: $(AUTOCONF_INPUTS)

	cd ${srcdir} && autoconf

$(srcdir)/src/config.in: $(srcdir)/src/stamp-h.in

	@true

$(srcdir)/src/stamp-h.in: $(AUTOCONF_INPUTS)

	cd ${srcdir} && autoheader

	rm -f $(srcdir)/src/stamp-h.in

	echo timestamp > $(srcdir)/src/stamp-h.in

# ==================== Installation ====================

## If we let lib-src do its own installation, that means we

## don't have to duplicate the list of utilities to install in

## this Makefile as well.

## On AIX, use tar xBf.

## On Xenix, use tar xpf.

.PHONY: install mkdir

## We delete each directory in ${COPYDESTS} before we copy into it;

## that way, we can reinstall over directories that have been put in

## place with their files read-only (perhaps because they are checked

## into RCS).  In order to make this safe, we make sure that the

## source exists and is distinct from the destination.

### We do install-arch-indep first because

### the executable needs the Lisp files and DOC file to work properly.

install: all install-arch-indep install-arch-dep install-leim blessmail

	@true

MV_DIRS = for i in $$dir; do rm -fr `basename "$$i"` ; mv "$$i" . ; done

### Install the executables that were compiled specifically for this machine.

### It would be nice to do something for a parallel make

### to ensure that install-arch-indep finishes before this starts.

install-arch-dep: mkdir

	(cd lib-src; \

	  $(MAKE) install $(MFLAGS) prefix=${prefix} \

	    exec_prefix=${exec_prefix} bindir=${bindir} \

	    libexecdir=${libexecdir} archlibdir=${archlibdir} \

	    INSTALL_STRIP=${INSTALL_STRIP})

	${INSTALL_PROGRAM} $(INSTALL_STRIP) src/emacs${EXEEXT} $(DESTDIR)${bindir}/$(EMACSFULL)

	-chmod 1755 $(DESTDIR)${bindir}/$(EMACSFULL)

	rm -f $(DESTDIR)${bindir}/$(EMACS)

	-ln $(DESTDIR)${bindir}/$(EMACSFULL) $(DESTDIR)${bindir}/$(EMACS)

	-unset CDPATH; \

	for f in `cd lib-src && echo fns-*.el`; do \

	  if test -r lib-src/$$f ; then \

	    ${INSTALL_DATA} lib-src/$$f $(DESTDIR)${archlibdir}/$$f; \

	  else true; fi ; \

	done

	if test "${ns_appdir}" != ""; then \

	  ( cd ${ns_appresdir} ; \

	    if test -d share/emacs ; then dir=share/emacs/*/*; $(MV_DIRS); fi;\

	    if test -d share/info ; then dir=share/info; $(MV_DIRS) ; fi ; \

	    rm -fr share ) ; \

	  ( cd ${ns_appbindir}/libexec ; dir=emacs/*/*/* ; $(MV_DIRS); \

	    rm -fr emacs ) ; \

	  ( cd ${ns_appbindir}/bin ; rm -f emacs emacs-23* ; \

	    ln -sf ../libexec/* .) ; \

	else true ; fi

## http://lists.gnu.org/archive/html/emacs-devel/2007-10/msg01672.html

## Needs to be the user running install, so configure can't set it.

set_installuser=for installuser in $${LOGNAME} $${USERNAME} $${USER} \

	  `id -un 2> /dev/null`; do \

	  [ -n "$${installuser}" ] && break ; \

	done

### Install the files that are machine-independent.

### Most of them come straight from the distribution;

### the exception is the DOC-* files, which are copied

### from the build directory.

## Note that we copy DOC* and then delete DOC

## as a workaround for a bug in tar on Ultrix 4.2.

## We install only the relevant DOC file if possible

## (ie DOC-${version}.buildnumber), otherwise DOC-${version}*.

## If people complain about the h flag in tar command, take that out.

## That flag is also used in leim/Makefile.in

## Note that the Makefiles in the etc directory are potentially useful

## in an installed Emacs, so should not be excluded.

install-arch-indep: mkdir info install-etc

	-set ${COPYDESTS} ; \

	unset CDPATH; \

	for dir in ${COPYDIR} ; do \

	  if [ `(cd $$1 && /bin/pwd)` != `(cd $${dir} && /bin/pwd)` ] ; then \

	    rm -rf $$1 ; \

	  fi ; \

	  shift ; \

	done

	-set ${COPYDESTS} ; \

	mkdir ${COPYDESTS} ; \

	chmod ugo+rx ${COPYDESTS} ; \

	unset CDPATH; \

	$(set_installuser); \

	for dir in ${COPYDIR} ; do \

	  dest=$$1 ; shift ; \

	  [ -d $${dir} ] \

	  && [ `(cd $${dir} && /bin/pwd)` != `(cd $${dest} && /bin/pwd)` ] \

	  && (echo "Copying $${dir} to $${dest}..." ; \

	      (cd $${dir}; tar -chf - . ) \

		| (cd $${dest}; umask 022; \

                   tar -xvf - && cat > /dev/null) || exit 1; \

	      find $${dest} -exec chown $${installuser} {} ';' ;\

	      for subdir in `find $${dest} -type d ! -name RCS ! -name CVS -print` ; do \

		chmod a+rx $${subdir} ; \

		rm -rf $${subdir}/RCS ; \

		rm -rf $${subdir}/CVS ; \

		rm -f  $${subdir}/.cvsignore ; \

		rm -f  $${subdir}/.gitignore ; \

		rm -f  $${subdir}/.arch-inventory ; \

		rm -f  $${subdir}/.DS_Store ; \

		rm -f  $${subdir}/\#* ; \

		rm -f  $${subdir}/.\#* ; \

		rm -f  $${subdir}/*~ ; \

		rm -f  $${subdir}/*.orig ; \

		[ "$${dir}" != "${srcdir}/etc" ] && \

			rm -f  $${subdir}/[mM]akefile* ; \

		rm -f  $${subdir}/ChangeLog* ; \

		rm -f  $${subdir}/dired.todo ; \

	      done) ; \

	done

	-rm -f $(DESTDIR)${lispdir}/subdirs.el

	$(srcdir)/update-subdirs $(DESTDIR)${lispdir}

	if [ -f $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el ]; \

	then true; \

	else \

	  (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \

	   echo "    (normal-top-level-add-subdirs-to-load-path))") \

	    > $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el; \

	fi

	chmod a+r $(DESTDIR)${datadir}/emacs/${version}/site-lisp/subdirs.el

	-if [ -f $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el ]; \

	then true; \

	else \

	  (echo "(if (fboundp 'normal-top-level-add-subdirs-to-load-path)"; \

	   echo "    (normal-top-level-add-subdirs-to-load-path))") \

	    > $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el; \

	fi

	-chmod a+r $(DESTDIR)${datadir}/emacs/site-lisp/subdirs.el

	-unset CDPATH; \

	if [ `(cd ./etc; /bin/pwd)` != `(cd $(DESTDIR)${docdir}; /bin/pwd)` ]; \

	then \

	   fullversion=`./src/emacs --version | sed -n '1 s/GNU Emacs *//p'`; \

	   if [ -f "./etc/DOC-$${fullversion}" ]; \

	   then \

	     docfile="DOC-$${fullversion}"; \

	   else \

	     docfile="DOC"; \

	   fi; \

	   echo "Copying etc/$${docfile} to $(DESTDIR)${docdir} ..." ; \

	   (cd ./etc; tar -chf - $${docfile}) \

	     |(cd $(DESTDIR)${docdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \

	   (cd $(DESTDIR)$(docdir); \

	    $(set_installuser); \

	    chown $${installuser} DOC*; chmod a+r DOC*; \

	    if test "`echo DOC-*`" != "DOC-*"; then rm -f DOC; fi); \

	else true; fi

	-unset CDPATH; \

	if [ -r ./lisp ] \

	   && [ -r ./lisp/simple.el ] \

	   && [ x`(cd ./lisp; /bin/pwd)` != x`(cd $(DESTDIR)${lispdir}; /bin/pwd)` ] \

	   && [ x`(cd ${srcdir}/lisp; /bin/pwd)` != x`(cd ./lisp; /bin/pwd)` ]; \

	then \

	   echo "Copying lisp/*.el and lisp/*.elc to $(DESTDIR)${lispdir} ..." ; \

	   (cd lisp; tar -chf - *.el *.elc) \

	     |(cd $(DESTDIR)${lispdir}; umask 022; tar -xvf - && cat > /dev/null) || exit 1; \

	   (cd $(DESTDIR)${lispdir}; \

	    $(set_installuser); \

	    find . -exec chown $${installuser} {} ';') ; \

	else true; fi

	-unset CDPATH; \

	if [ -n "${GZIP_PROG}" ]; \

	then \

	   echo "Compressing *.el ..." ; \

	   (cd $(DESTDIR)${lispdir}; for f in `find . -name "*.elc" -print`; do \

		${GZIP_PROG} -9n `echo $$f|sed 's/.elc$$/.el/'` ; \

	    done) \

	else true; fi

	-unset CDPATH; \

	thisdir=`/bin/pwd`; \

	if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \

	then \

	  (cd $(DESTDIR)${infodir};  \

	   if [ -f dir ]; then true; \

	   else	\

	     (cd $${thisdir}; \

	      ${INSTALL_DATA} ${srcdir}/info/dir $(DESTDIR)${infodir}/dir; \

	      chmod a+r $(DESTDIR)${infodir}/dir); \

	   fi; \

	   cd ${srcdir}/info ; \

	   for elt in $(INFO_FILES); do \

	      test "$(MAKEINFO)" = "off" && ! test -e $$elt && continue; \

	      for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \

	        ${INSTALL_DATA} $$f $(DESTDIR)${infodir}/$$f; \

	        chmod a+r $(DESTDIR)${infodir}/$$f; \

	      done; \

	   done); \

	else true; fi

	-unset CDPATH; \

	thisdir=`/bin/pwd`; \

	if [ `(cd ${srcdir}/info && /bin/pwd)` != `(cd $(DESTDIR)${infodir} && /bin/pwd)` ]; \

	then \

	  for elt in $(INFO_FILES); do \

	    test "$(MAKEINFO)" = "off" && ! test -e $$elt && continue; \

	    (cd $${thisdir}; \

	     ${INSTALL_INFO} --info-dir=$(DESTDIR)${infodir} $(DESTDIR)${infodir}/$$elt); \

	  done; \

	else true; fi

	-chmod -R a+r $(DESTDIR)${datadir}/emacs/${version} ${COPYDESTS}

	thisdir=`/bin/pwd`; \

	cd ${mansrcdir}; \

	for page in ${MAN_PAGES}; do \

	  (cd $${thisdir}; \

	   ${INSTALL_DATA} ${mansrcdir}/$${page} $(DESTDIR)${man1dir}/$${page}; \

	   chmod a+r $(DESTDIR)${man1dir}/$${page}); \

	done

## Install those items from etc/ that need to end up elsewhere.

install-etc: mkdir

	${INSTALL_DATA} ${srcdir}/etc/emacs.desktop \

	  $(DESTDIR)${desktopdir}/emacs.desktop

	for icon in $(iconsrcdir)/*/*/apps/*.* \

	  $(iconsrcdir)/*/*/mimetypes/*.*; do \

	  if [ -r $${icon} ]; then \

	    iicon=`echo "$${icon}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},'` ; \

	    ${INSTALL_DATA} $${icon} $${iicon} ; \

	  fi ; \

	done

### Install LEIM files.  Although they are machine-independent, we

### have separate target here instead of including it in

### `install-arch-indep'.  People who extracted LEIM files after they

### insalled Emacs itself can install only LEIM files by this target.

install-leim: leim/Makefile mkdir

	cd leim; $(MAKE) install

### Build Emacs and install it, stripping binaries while installing them.

install-strip:

	$(MAKE) INSTALL_STRIP=-s install

### Build all the directories we're going to install Emacs in.	Since

### we may be creating several layers of directories (for example,

### /usr/local/lib/emacs/19.0/mips-dec-ultrix4.2), we use mkinstalldirs

### instead of mkdir.  Not all systems' mkdir programs have the `-p' flag.

### We set the umask so that any created directories are world-readable.

### FIXME it would be good to warn about non-standard permissions of

### pre-existing directories, but that does not seem easy.

mkdir: FRC

	icondirs= ; \

	for dir in $(iconsrcdir)/*/*/apps $(iconsrcdir)/*/*/mimetypes; do \

	  if [ -d $${dir} ]; then \

	    icondirs="$${icondirs} $${dir}" ; \

	  fi ; \

	done ; \

	icondirs=`echo "$${icondirs}" | sed 's,$(srcdir)/etc/images/icons,$(DESTDIR)${icondir},g'` ; \

	umask 022 ; \

	$(srcdir)/mkinstalldirs $(DESTDIR)${datadir} ${COPYDESTS} \

	  $(DESTDIR)${infodir} $(DESTDIR)${man1dir} \

	  $(DESTDIR)${bindir} $(DESTDIR)${docdir} $(DESTDIR)${libexecdir} \

	  $(DESTDIR)${datadir}/emacs/site-lisp \

	  $(DESTDIR)${datadir}/emacs/${version}/site-lisp \

	  $(DESTDIR)`echo ${locallisppath} | sed 's,:, $(DESTDIR),g'` \

	  $(DESTDIR)${desktopdir} $${icondirs}

### Delete all the installed files that the `install' target would

### create (but not the noninstalled files such as `make all' would create).

###

### Don't delete the lisp and etc directories if they're in the source tree.

uninstall:

	(cd lib-src; 					\

	 $(MAKE) $(MFLAGS) uninstall			\

	    prefix=${prefix} exec_prefix=${exec_prefix}	\

	    bindir=${bindir} libexecdir=${libexecdir} archlibdir=${archlibdir})

	-unset CDPATH; \

	for dir in $(DESTDIR)${lispdir} $(DESTDIR)${etcdir} ; do 	\

	  if [ -d $${dir} ]; then			\

	    case `(cd $${dir} ; /bin/pwd)` in		\

	      `(cd ${srcdir} ; /bin/pwd)`* ) ;;		\

	      * ) rm -rf $${dir} ;;			\

	    esac ;					\

	    case $${dir} in				\

	      $(DESTDIR)${datadir}/emacs/${version}/* )		\

	        rm -rf $(DESTDIR)${datadir}/emacs/${version}	\

	      ;;					\

	    esac ;					\

	  fi ;						\

	done

	(cd $(DESTDIR)${archlibdir} && rm -f fns-*)

	-rm -rf $(DESTDIR)${libexecdir}/emacs/${version}

	(cd $(DESTDIR)${infodir} && \

	  for elt in $(INFO_FILES); do \

	    $(INSTALL_INFO) --remove --info-dir=. $$elt; \

	    for f in `ls $$elt $$elt-[1-9] $$elt-[1-9][0-9] 2>/dev/null`; do \

	      rm -f $$f; \

	    done; \

	  done;)

	(cd $(DESTDIR)${man1dir}  && rm -f $(MAN_PAGES))

	(cd $(DESTDIR)${bindir}  && rm -f $(EMACSFULL) $(EMACS))

	(cd $(DESTDIR)${icondir} && rm -f hicolor/*x*/apps/emacs.png hicolor/*x*/apps/emacs22.png hicolor/scalable/apps/emacs.svg hicolor/scalable/mimetypes/emacs-document.svg )

	-rm -f $(DESTDIR)${desktopdir}/emacs.desktop

	for file in snake-scores tetris-scores; do \

	  file=$(DESTDIR)${gamedir}/$${file}; \

	  [ -s $${file} ] || rm -f $$file; \

	done

FRC:

# ==================== Cleaning up and miscellanea ====================

.PHONY: mostlyclean clean distclean maintainer-clean extraclean

### `mostlyclean'

###      Like `clean', but may refrain from deleting a few files that people

###      normally don't want to recompile.  For example, the `mostlyclean'

###      target for GCC does not delete `libgcc.a', because recompiling it

###      is rarely necessary and takes a lot of time.

mostlyclean: FRC

	(cd src;      $(MAKE) $(MFLAGS) mostlyclean)

	(cd oldXMenu; $(MAKE) $(MFLAGS) mostlyclean)

	(cd lwlib;    $(MAKE) $(MFLAGS) mostlyclean)

	(cd lib-src;  $(MAKE) $(MFLAGS) mostlyclean)

	-(cd doc/emacs &&   $(MAKE) $(MFLAGS) mostlyclean)

	-(cd doc/misc &&   $(MAKE) $(MFLAGS) mostlyclean)

	-(cd doc/lispref &&   $(MAKE) $(MFLAGS) mostlyclean)

	-(cd doc/lispintro &&   $(MAKE) $(MFLAGS) mostlyclean)

	(cd leim;     $(MAKE) $(MFLAGS) mostlyclean)

### `clean'

###      Delete all files from the current directory that are normally

###      created by building the program.  Don't delete the files that

###      record the configuration.  Also preserve files that could be made

###      by building, but normally aren't because the distribution comes

###      with them.

###

###      Delete `.dvi' files here if they are not part of the distribution.

clean: FRC

	(cd src;      $(MAKE) $(MFLAGS) clean)

	(cd oldXMenu; $(MAKE) $(MFLAGS) clean)

	(cd lwlib;    $(MAKE) $(MFLAGS) clean)

	(cd lib-src;  $(MAKE) $(MFLAGS) clean)

	-(cd doc/emacs &&   $(MAKE) $(MFLAGS) clean)

	-(cd doc/misc &&   $(MAKE) $(MFLAGS) clean)

	-(cd doc/lispref &&   $(MAKE) $(MFLAGS) clean)

	-(cd doc/lispintro &&   $(MAKE) $(MFLAGS) clean)

	(cd leim;     $(MAKE) $(MFLAGS) clean)

### `bootclean'

###      Delete all files that need to be remade for a clean bootstrap.

top_bootclean=\

	rm -f config.cache config.log

### `distclean'

###      Delete all files from the current directory that are created by

###      configuring or building the program.  If you have unpacked the

###      source and built the program without creating any other files,

###      `make distclean' should leave only the files that were in the

###      distribution.

top_distclean=\

	${top_bootclean}; \

	rm -f config.status Makefile ${SUBDIR_MAKEFILES}

distclean: FRC

	(cd src;      $(MAKE) $(MFLAGS) distclean)

	(cd oldXMenu; $(MAKE) $(MFLAGS) distclean)

	(cd lwlib;    $(MAKE) $(MFLAGS) distclean)

	(cd lib-src;  $(MAKE) $(MFLAGS) distclean)

	(cd doc/emacs &&    $(MAKE) $(MFLAGS) distclean)

	(cd doc/misc &&    $(MAKE) $(MFLAGS) distclean)

	(cd doc/lispref &&    $(MAKE) $(MFLAGS) distclean)

	(cd doc/lispintro &&    $(MAKE) $(MFLAGS) distclean)

	(cd leim;     $(MAKE) $(MFLAGS) distclean)

	(cd lisp;     $(MAKE) $(MFLAGS) distclean)

	${top_distclean}

### `bootstrap-clean'

###      Delete everything that can be reconstructed by `make' and that

###      needs to be deleted in order to force a bootstrap from a clean state.

bootstrap-clean: FRC

	(cd src;      $(MAKE) $(MFLAGS) bootstrap-clean)

	(cd oldXMenu; $(MAKE) $(MFLAGS) maintainer-clean)

	(cd lwlib;    $(MAKE) $(MFLAGS) maintainer-clean)

	(cd lib-src;  $(MAKE) $(MFLAGS) maintainer-clean)

	-(cd doc/emacs &&   $(MAKE) $(MFLAGS) maintainer-clean)

	-(cd doc/misc &&   $(MAKE) $(MFLAGS) maintainer-clean)

	-(cd doc/lispref &&   $(MAKE) $(MFLAGS) maintainer-clean)

	-(cd doc/lispintro &&   $(MAKE) $(MFLAGS) maintainer-clean)

	(cd leim;     $(MAKE) $(MFLAGS) maintainer-clean)

	(cd lisp;     $(MAKE) $(MFLAGS) bootstrap-clean)

	${top_bootclean}

### `maintainer-clean'

###      Delete everything from the current directory that can be

###      reconstructed with this Makefile.  This typically includes

###      everything deleted by distclean, plus more: C source files

###      produced by Bison, tags tables, info files, and so on.

###

###      One exception, however: `make maintainer-clean' should not delete

###      `configure' even if `configure' can be remade using a rule in the

###      Makefile.  More generally, `make maintainer-clean' should not delete

###      anything that needs to exist in order to run `configure' and then

###      begin to build the program.

maintainer-clean: bootstrap-clean FRC

	(cd src;      $(MAKE) $(MFLAGS) maintainer-clean)

	(cd lisp;     $(MAKE) $(MFLAGS) maintainer-clean)

	${top_distclean}

### This doesn't actually appear in the coding standards, but Karl

### says GCC supports it, and that's where the configuration part of

### the coding standards seem to come from.  It's like distclean, but

### it deletes backup and autosave files too.

extraclean:

	for i in ${SUBDIR} leim; do (cd $$i; $(MAKE) $(MFLAGS) extraclean); done

	${top_distclean}

	-rm -f config-tmp-*

	-rm -f *~ \#*

# The src subdir knows how to do the right thing

# even when the build directory and source dir are different.

TAGS tags: lib-src src

	cd src; $(MAKE) tags

check:

	@echo "We don't have any tests for GNU Emacs yet."

dist:

	cd ${srcdir}; ./make-dist

.PHONY: info dvi dist check html

info-real: 

	(cd doc/emacs; $(MAKE) $(MFLAGS) info)

	(cd doc/misc; $(MAKE) $(MFLAGS) info)

	(cd doc/lispref; $(MAKE) $(MFLAGS) info)

	(cd doc/lispintro; $(MAKE) $(MFLAGS) info)

force-info:

# Note that man/Makefile knows how to put the info files in $(srcdir),

# so we can do ok running make in the build dir.

# This used to have a clause that exited with an error if MAKEINFO = no.

# But it is inappropriate to do so without checking if makeinfo is

# actually needed - it is not if the info files are up-to-date.  (Bug#3982)

# Only the doc/*/Makefiles can decide that, so we let those rules run

# and give a standard error if makeinfo is needed but missing.

# While it would be nice to give a more detailed error message, that

# would require changing every rule in doc/ that builds an info file,

# and it's not worth it.  This case is only relevant if you download a

# release, then change the .texi files.

info: force-info

	@if test "$(MAKEINFO)" = "off"; then \

	  echo "Configured --without-makeinfo, not building manuals" ; \

	else \

	  $(MAKE) $(MFLAGS) info-real ; \

	fi

# The info/dir file must be updated by hand when new manuals are added.

check-info-dir: info

	cd info ; \

	missing= ; \

	for file in *; do \

	  test -f "$${file}" || continue ; \

	  case $${file} in \

	    *-[0-9]*|COPYING|dir) continue ;; \

	  esac ; \

	  grep -q -F ": ($${file})." dir || missing="$${missing} $${file}" ; \

	done ; \

	if test -n "$${missing}"; then \

	  echo "Missing info/dir entries: $${missing}" ; \

	  exit 1 ; \

	fi ; \

	echo "info/dir is OK"

dvi:

	(cd doc/emacs; $(MAKE) $(MFLAGS) dvi)

	(cd doc/misc; $(MAKE) $(MFLAGS) dvi)

	(cd doc/lispref; $(MAKE) $(MFLAGS) elisp.dvi)

	(cd doc/lispintro; $(MAKE) $(MFLAGS) emacs-lisp-intro.dvi)

#### Bootstrapping.

### This first cleans the lisp subdirectory, removing all compiled

### Lisp files.  Then re-run make to build all the files anew.

.PHONY: bootstrap

bootstrap: bootstrap-clean FRC

	if [ -x ./config.status ]; then           \

	    ./config.status;                      \

	else                                      \

	    ./configure --enable-maintainer-mode; \

	fi

	$(MAKE) $(MFLAGS) info all

.PHONY: check-declare

check-declare:

	@if [ ! -e $(srcdir)/src/emacs ]; then \

	  echo "You must build Emacs to use this command"; \

	  exit 1; \

	fi

	(cd leim; $(MAKE) $(MFLAGS) $@)

	(cd lisp; $(MAKE) $(MFLAGS) $@)