nm-kernel:u-boot-nm.git
3 years agocommon/board_f: implement type casting for gd structure
Alexey Brodkin [Wed, 25 Feb 2015 14:59:02 +0000 (17:59 +0300)]
common/board_f: implement type casting for gd structure

In case of global data structure defined as "register volatile" compiler
throws an warning about incorrect type used:
 --->8---
 common/board_f.c: In function "board_init_f_r":
 common/board_f.c:1073:2: warning: passing argument 1 of "&board_init_r
 +(sizetype)gd->reloc_off" discards "volatile" qualifier from pointer
 target type [enabled by default]
  (board_init_r + gd->reloc_off)(gd, gd->relocaddr);
  ^
 common/board_f.c:1073:2: note: expected "struct gd_t *" but argument is
 of type "volatile struct gd_t *"
 --->8---

An obvious fix is manual casting to "gd_t *".

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
3 years agolib/asm-offsets - make GD_RELOCADDR, GD_RELOC_OFF & GD_START_ADDR_SP available for...
Alexey Brodkin [Wed, 25 Feb 2015 10:09:20 +0000 (13:09 +0300)]
lib/asm-offsets - make GD_RELOCADDR, GD_RELOC_OFF & GD_START_ADDR_SP available for all architectures

GD_RELOCADDR, GD_RELOC_OFF & GD_START_ADDR_SP are generic members of
global data structure so why don't we allow architectures other than ARM
to use it.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
3 years agospl: fix calling "spl export .." more than once
Heiko Schocher [Tue, 24 Feb 2015 06:04:38 +0000 (07:04 +0100)]
spl: fix calling "spl export .." more than once

running "spl export ..." more than once fails with:

Trying to execute a command out of order
Trying to execute a command out of order
Trying to execute a command out of order
Trying to execute a command out of order
Trying to execute a command out of order
Trying to execute a command out of order
ERROR prep subcommand failed!
Subcommand failed

reason is commmit:
35fc84fa1f: Refactor the bootm command to reduce code duplication

It used "state != BOOTM_STATE_START" but state is a bitfield, so
check if the bit BOOTM_STATE_START is not set. With this fix,
"spl export ..." can called more than once ...

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agovexpress64: juno: add NOR flash detection
Linus Walleij [Thu, 19 Feb 2015 16:19:37 +0000 (17:19 +0100)]
vexpress64: juno: add NOR flash detection

This enables the vexpress64 to detect its NOR flash so that we
can load kernel etc from it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
3 years agouse ASM_NL instead of '; ' for assembler new line character in the macro
Chen Gang [Thu, 19 Feb 2015 15:51:27 +0000 (18:51 +0300)]
use ASM_NL instead of '; ' for assembler new line character in the macro

For some assemblers, they use another character as newline in a macro
(e.g. arc uses '`'), so for generic assembly code, need use ASM_NL (a
macro) instead of ';' for it.

Basically this is the same patch as applied to Linux kernel -
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/include/linux/linkage.h?id=9df62f054406992ce41ec4558fca6a0fa56fffeb

but modified a bit to fit in U-Boot.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@ti.com>
3 years agoomap: gpmc: 'nandecc sw' can use HAM1 or BCH8
Ash Charles [Wed, 18 Feb 2015 19:25:11 +0000 (11:25 -0800)]
omap: gpmc: 'nandecc sw' can use HAM1 or BCH8

The 'nandecc sw' command selects a software-based error correction
algorithm.  By default, this is OMAP_ECC_HAM1_CODE_SW but some
platforms use OMAP_ECC_BCH8_CODE_HW_DETECTION_SW as their
software-based correction algorithm.  Allow a user to be specific e.g.
 # nandecc sw <hamming|bch8>
where 'hamming' is still the default.

Note: we don't just use CONFIG_NAND_OMAP_ECCSCHEME as it might be set
      to a hardware-based ECC scheme---a little strange when the user
      has requested 'sw' ECC.

Signed-off-by: Ash Charles <ashcharles@gmail.com>
3 years agomtd: nand: omap_gpmc: Make ready/busy pins configurable
Michal Sojka [Tue, 17 Feb 2015 16:08:37 +0000 (17:08 +0100)]
mtd: nand: omap_gpmc: Make ready/busy pins configurable

Commit fb384c4720ca7496775d6578f184bf628db73456 introduced the use of
WAIT0 pin for determining whether the NAND is ready or not. This only
works if all NAND chips are connected to WAIT0. If some chips are
connected to the other available pin WAIT1, nand_wait() does not really
wait and prints a WARN_ON message.

This patch allows the board to provide configuration of which chip is
connected to which WAITx signal. For example, one can define in
include/configs/foo.h:

    #define CONFIG_NAND_OMAP_GPMC_WSCFG     0,0,1,1

This would mean that chips using to CS0 and 1 are connected to WAIT0 and
chips with CS2 and 3 are connected to WAIT1.

Signed-off-by: Michal Sojka <sojka@merica.cz>
Acked-by: Stefan Roese <sr@denx.de>
Tested-by: Michal Vokáč <michal.vokac@comap.cz>
Cc: Tom Rini <trini@ti.com>
3 years agofs: ext4 write: return file len on success
Przemyslaw Marczak [Tue, 17 Feb 2015 14:31:52 +0000 (15:31 +0100)]
fs: ext4 write: return file len on success

After rework of the file system API, the size of ext4
write was missed. This causes printing unreliable write
size at the end of the file system write operation.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
3 years agovexpress64: juno: support SMC9118 ethernet
Linus Walleij [Tue, 17 Feb 2015 10:35:25 +0000 (11:35 +0100)]
vexpress64: juno: support SMC9118 ethernet

This configures the Juno board to enable ethernet using the
SMSC9118 ethernet controller found in the board. Tested by
TFTP-booting a kernel over ethernet.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
3 years agom68k: Add generic board support for MCF547X/8X and MCF5445X
Alison Wang [Thu, 12 Feb 2015 10:33:15 +0000 (18:33 +0800)]
m68k: Add generic board support for MCF547X/8X and MCF5445X

This patch adds generic board support for MCF547X/8X and MCF5445X.
It is based on the patch about common generic board support for
M68K architecture sent by Angelo.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
3 years agom68k: add generic-board support
angelo@sysam.it [Thu, 12 Feb 2015 00:40:17 +0000 (01:40 +0100)]
m68k: add generic-board support

Add generic-board support for the m68k architecture.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
3 years agom68k: add mcf5307 cpu support
angelo@sysam.it [Thu, 12 Feb 2015 00:40:00 +0000 (01:40 +0100)]
m68k: add mcf5307 cpu support

Add Freescale MCF5307 cpu support.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
3 years agom68k: add amcore board support
angelo@sysam.it [Thu, 12 Feb 2015 00:39:40 +0000 (01:39 +0100)]
m68k: add amcore board support

Add Sysam Amcore m68k-based board support.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
3 years agoAdding Support for BAV335x boards
Gilles Gameiro [Tue, 10 Feb 2015 09:36:01 +0000 (01:36 -0800)]
Adding Support for BAV335x boards

3 years agoomap3: add support for QUIPOS Cairo board.
Albert ARIBAUD \(3ADEV\) [Tue, 3 Feb 2015 17:13:14 +0000 (18:13 +0100)]
omap3: add support for QUIPOS Cairo board.

This patch extends OMAP3 support for AM/DM37xx and
introduces the AM3703-based Quipos Cairo board.

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agocmd_yaffs: Clean up command usage messages
Peter Tyser [Tue, 3 Feb 2015 16:15:04 +0000 (10:15 -0600)]
cmd_yaffs: Clean up command usage messages

Remove duplicate command names in usage messages to fix issues such as:
  => help yls
  yls - yaffs ls

  Usage:
  yls yls [-l] dirname

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
3 years agoboard/BuR/kwb: Support modify bootcmd through reset-controller
Hannes Petermaier [Tue, 3 Feb 2015 12:22:43 +0000 (13:22 +0100)]
board/BuR/kwb: Support modify bootcmd through reset-controller

For some cases it is necessary to modify temporaly the bootcommand.
This can be done by writing into the Scratchregister a specific value:

* 0xCC - modify bootcmd "run netboot"
* 0xCD - modify bootcmd "run netscript"
* 0xCE - modify bootcmd "run mmcboot"

the environment in flash is NOT overwritten.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/kwb: Form a bootline for vxWorks
Hannes Petermaier [Tue, 3 Feb 2015 12:22:42 +0000 (13:22 +0100)]
board/BuR/kwb: Form a bootline for vxWorks

vxWorks needs several parameters which are set by the bootloader und his
environment. So we form a vxWorks bootline and pass the result to vxWorks on
a predefined address.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/kwb: Redesign default-environment
Hannes Petermaier [Tue, 3 Feb 2015 12:22:41 +0000 (13:22 +0100)]
board/BuR/kwb: Redesign default-environment

Due to several changes in the boot-process we do a complete redesign of the
default environment.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/kwb: Support booting Linux
Hannes Petermaier [Tue, 3 Feb 2015 12:22:40 +0000 (13:22 +0100)]
board/BuR/kwb: Support booting Linux

For series testing purpose we need to boot some linux, therefore we enable
the needed features

- bootz
- devicetree

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/kwb: switch to board HW-Rev3
Hannes Petermaier [Tue, 3 Feb 2015 12:22:39 +0000 (13:22 +0100)]
board/BuR/kwb: switch to board HW-Rev3

The board has been redesigned, therefore we need from now other I/O Pins to
mux and handle.

Older boards aren't supported from now anymore.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/tseries: cosmetic changes
Hannes Petermaier [Tue, 3 Feb 2015 12:22:38 +0000 (13:22 +0100)]
board/BuR/tseries: cosmetic changes

remove unnary '#define ETHLED_ORANGE (96+16) /* GPIO3_16 */'

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/tseries: Rework default-environment settings.
Hannes Petermaier [Tue, 3 Feb 2015 12:22:37 +0000 (13:22 +0100)]
board/BuR/tseries: Rework default-environment settings.

Due to several changes of the boot-process we've redesigned the default-
environment settings completly.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/common: Add support for displaying BMP on LCD
Hannes Petermaier [Tue, 3 Feb 2015 12:22:36 +0000 (13:22 +0100)]
board/BuR/common: Add support for displaying BMP on LCD

Customer wants to display some logo very quickly after power on, so we support
from now loading a compressed bmp.gz to the screen.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/common: Enable CONFIG_CMD_TIME
Hannes Petermaier [Tue, 3 Feb 2015 12:22:35 +0000 (13:22 +0100)]
board/BuR/common: Enable CONFIG_CMD_TIME

time measurement of u-boot commands is needed very often during development.
We add this feature until development is completed. Maybe forever :)

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/common: Introduce Network Console and common environment for it
Hannes Petermaier [Tue, 3 Feb 2015 12:22:34 +0000 (13:22 +0100)]
board/BuR/common: Introduce Network Console and common environment for it

It is often necessary to "break in" into boards bootloader commandline if
something fails or even for development purposes some parameters have to be
changed.

So we enable u-boot's CONFIG_NETCONSOLE feature.
We also modify Networksettings to apply with this new use-case.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/tseries: Chg Pinmux - enable UART1 pins
Hannes Petermaier [Tue, 3 Feb 2015 12:22:33 +0000 (13:22 +0100)]
board/BuR/tseries: Chg Pinmux - enable UART1 pins

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/tseries: Chg pinmux - use free NAND Pins in non NAND-config as GPIO
Hannes Petermaier [Tue, 3 Feb 2015 12:22:32 +0000 (13:22 +0100)]
board/BuR/tseries: Chg pinmux - use free NAND Pins in non NAND-config as GPIO

On boards were we have no NAND-flash soldered, we want to use those free pins
as regular gpio.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/tseries: Change pinmux for GPIO2_28 from GPIO to PWM-Timeroutput
Hannes Petermaier [Tue, 3 Feb 2015 12:22:31 +0000 (13:22 +0100)]
board/BuR/tseries: Change pinmux for GPIO2_28 from GPIO to PWM-Timeroutput

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/tseries: Enable EXT4 support
Hannes Petermaier [Tue, 3 Feb 2015 12:22:30 +0000 (13:22 +0100)]
board/BuR/tseries: Enable EXT4 support

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/tseries: Enable U-Boot BOOTCOUNT feature
Hannes Petermaier [Tue, 3 Feb 2015 12:22:29 +0000 (13:22 +0100)]
board/BuR/tseries: Enable U-Boot BOOTCOUNT feature

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/tseries: Enable HW-Watchdog
Hannes Petermaier [Tue, 3 Feb 2015 12:22:28 +0000 (13:22 +0100)]
board/BuR/tseries: Enable HW-Watchdog

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/common: try to setup cpsw mac-address from the devicetree
Hannes Petermaier [Tue, 3 Feb 2015 12:22:27 +0000 (13:22 +0100)]
board/BuR/common: try to setup cpsw mac-address from the devicetree

since we have a dtb blob programmed on the board we try to setup the cpsw
interface with the programmed mac.
If this method fails, we fall back to the device-fuses.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoboard/BuR/common: Take usage of am335x LCD-Display
Hannes Petermaier [Tue, 3 Feb 2015 12:22:26 +0000 (13:22 +0100)]
board/BuR/common: Take usage of am335x LCD-Display

a summary screen to the lcd.
Values are taken from environment and or devicetree blob.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agocommon/lcd: Add command for writing to lcd-display
Hannes Petermaier [Tue, 3 Feb 2015 12:22:25 +0000 (13:22 +0100)]
common/lcd: Add command for writing to lcd-display

Sometimes we do not want redirect u-boot's console to screen but anyway we want
write out some status information out of a u-boot script to the display.

So we cannot use the normal "echo ....", instead we write explicitly using
"lcdputs ..." for writing to the actual cursor position on LCD.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agocommon/lcd: Add command for setting cursor within lcd-console
Hannes Petermaier [Tue, 3 Feb 2015 12:22:24 +0000 (13:22 +0100)]
common/lcd: Add command for setting cursor within lcd-console

Sometimes we do not want redirect u-boot's console to screen but anyway we want
write out some status information out of a u-boot script to the display.

To define the specific position of the string to be written, we have to set
the cursor with "setcurs" before writing.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agodrivers/video/am335x-fb: Add possibility to wait for stable power/picture
Hannes Petermaier [Tue, 3 Feb 2015 12:22:23 +0000 (13:22 +0100)]
drivers/video/am335x-fb: Add possibility to wait for stable power/picture

Often on boards exists a circuit which switches power on/off to LCD display.
Due to the need of limiting the in-rush current the output voltage from this
circuit rises "slowly", so it is necessary to wait a bit (VCC ramp up time)
before starting output on LCD-pins.
This time is specified in <n> ms within the panel-settings, called "pup_delay"

Further some LCDs need a couple of frames to stabilize the image on it.
We have now the possibility to wait some time after starting output on LCD.
This time is also specified in <n> ms within panel-settings, called "pon_delay"

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
3 years agoarm: spear: Move to generic board support
Stefan Roese [Tue, 3 Feb 2015 07:27:21 +0000 (08:27 +0100)]
arm: spear: Move to generic board support

Without this change the board support for these SPEAr boards would
be dropped soon. Generic board support seems to work just fine.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vipin Kumar <vk.vipin@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
3 years agonet: Support DMA threshold mode in DWMAC driver
Sonic Zhang [Thu, 29 Jan 2015 06:38:50 +0000 (14:38 +0800)]
net: Support DMA threshold mode in DWMAC driver

- DMA threshold mode can be selected in board config head file.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
3 years agonet: configure DWMAC DMA by default AXI burst length
Sonic Zhang [Thu, 29 Jan 2015 05:37:31 +0000 (13:37 +0800)]
net: configure DWMAC DMA by default AXI burst length

Board can define its own AXI burst length to improve DWMAC DMA performance.

v2-changes:
- Avoid write burst len register when the Macro is not defined.

v3-changes:
- Add axi_bus register member to struct eth_dma_regs.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
3 years agoscripts/checkstack.pl: update to get AArch64 port from Linux
Kim Phillips [Wed, 28 Jan 2015 19:15:01 +0000 (13:15 -0600)]
scripts/checkstack.pl: update to get AArch64 port from Linux

Bring checkstack.pl up to date from its upstream Linux development.
Effectively, the following linux commits:

208ad00 checkstack.pl: port to AArch64
fda9f99 scripts/checkstack.pl: automatically handle 32-bit and 64-bit mode for ARCH=x86
7eb6e34 kbuild: trivial - remove trailing empty lines
690998b scripts/checkstack.pl: Add metag support

Reported-by: York Sun <yorksun@freescale.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3 years agogpt: support random UUIDs without setting environment variables
Rob Herring [Mon, 26 Jan 2015 15:44:18 +0000 (09:44 -0600)]
gpt: support random UUIDs without setting environment variables

Currently, an environment variable must be used to store the randomly
generated UUID for each partition. This is not necessary, so make storing
the UUID optional. Now passing uuid_disk and uuid are optional when random
UUIDs are enabled.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
3 years agogpt: fix error reporting on partition table write failures
Rob Herring [Mon, 26 Jan 2015 15:43:15 +0000 (09:43 -0600)]
gpt: fix error reporting on partition table write failures

The gpt command always reports success even if writing the partition table
failed. Propagate the return value of gpt_restore so we get proper status
reported.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com>
3 years agoarm, da8xx: convert ipam390 board to generic board support
Heiko Schocher [Tue, 24 Feb 2015 06:04:59 +0000 (07:04 +0100)]
arm, da8xx: convert ipam390 board to generic board support

enable generic board support for the ipam390 board.

Signed-off-by: Heiko Schocher <hs@denx.de>
3 years agotravis.yml: some adaptions
Heiko Schocher [Thu, 5 Mar 2015 08:02:23 +0000 (09:02 +0100)]
travis.yml: some adaptions

- adapt to build with eldk-5.4
- add more targets for building with buildman:
  - freescale -x arm,m68k,aarch64
  - arm1136
  - arm1176
  - arm720t
  - arm920t
  - davinci
  - kirkwood

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Roger Meier <r.meier@siemens.com>
3 years agoarm: pxa: introducing cpuinfo display for marvell pxa270m
Marcel Ziswiler [Wed, 4 Mar 2015 13:57:31 +0000 (14:57 +0100)]
arm: pxa: introducing cpuinfo display for marvell pxa270m

According to table 2-3 on page 87 of Marvell's latest PXA270
Specification Update Rev. I from 2010.04.19 [1] there exists a breed of
chips with a new CPU ID for PXA270M A1 stepping which our latest
Colibri PXA270 V2.4A modules actually have assembled. This patch helps
in correctly identifying those chips upon boot as well which then looks
as follows:

CPU: Marvell PXA27xM rev. A1

[1] http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf

Acked-by: Marek Vasut <marex@denx.de>
3 years agokconfig: common: Fix memtest bool name
Nikolaos Pasaloukos [Thu, 5 Mar 2015 13:15:20 +0000 (13:15 +0000)]
kconfig: common: Fix memtest bool name

Fix the name appearing in menuconfig for memtest command

Signed-off-by: Nikolaos Pasaloukos <Nikolaos.Pasaloukos@imgtec.com>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com
3 years agowoodburn: Convert to generic board
Stefano Babic [Thu, 5 Mar 2015 09:41:17 +0000 (10:41 +0100)]
woodburn: Convert to generic board

Boards need to select CONFIG_SYS_GENERIC_BOARD in order to
prevent removal from the project.

Signed-off-by: Stefano Babic <sbabic@denx.de>
3 years agomx35pdk: Convert to generic board
Stefano Babic [Thu, 5 Mar 2015 09:41:16 +0000 (10:41 +0100)]
mx35pdk: Convert to generic board

Boards need to select CONFIG_SYS_GENERIC_BOARD in order to
prevent removal from the project.

Signed-off-by: Stefano Babic <sbabic@denx.de>
3 years agoflea3: Convert to generic board
Stefano Babic [Thu, 5 Mar 2015 09:41:15 +0000 (10:41 +0100)]
flea3: Convert to generic board

Boards need to select CONFIG_SYS_GENERIC_BOARD in order to
prevent removal from the project.

Signed-off-by: Stefano Babic <sbabic@denx.de>
3 years agofsl_sec.h: Fix thinko
Tom Rini [Thu, 5 Mar 2015 13:56:39 +0000 (08:56 -0500)]
fsl_sec.h: Fix thinko

In 0200020 we added a number of tests for 'if
defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6)' and
accidentally did one as 'ifdef defined...'

Signed-off-by: Tom Rini <trini@konsulko.com>
3 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-imx
Tom Rini [Thu, 5 Mar 2015 12:22:18 +0000 (07:22 -0500)]
Merge branch 'master' of git://denx.de/git/u-boot-imx

3 years agomx5: fix get_reset_cause
Stefano Babic [Mon, 2 Mar 2015 09:12:13 +0000 (10:12 +0100)]
mx5: fix get_reset_cause

commit d9f43c8f5c1d7ed27c99a06be85a4bb64b2c73fb sets
get_reset_cause() as static, but this conflicts with mx5
where its prototype is in sys_proto.h.

Drop it from sys_proto.h and drop print_cpuinfo from mx53_loco,
factorizing the call for this board.

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Jason Liu <jason.hui@linaro.org>
3 years agoti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK
Simon Glass [Tue, 3 Mar 2015 15:03:02 +0000 (08:03 -0700)]
ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK

Currently in some cases SDRAM init requires global_data to be available
and soon this will not be available prior to board_init_f().  Adjust the
code paths in these cases to be correct.  In some cases we had the SPL
stack be in DDR as we might have large stacks (due to Falcon Mode +
Environment).  In these cases switch to CONFIG_SPL_STACK_R.  In other
cases we had simply been setting CONFIG_SPL_STACK into SRAM.  In these
cases we no longer need to (CONFIG_SYS_INIT_SP_ADDR is used and is also
in SRAM) so drop those lines.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested on Beagleboard, Beagleboard xM
Tested-by: Matt Porter <mporter@konsulko.com>
Tested on Beaglebone Black, AM43xx GP EVM, OMAP5 uEVM, OMAP4 Pandaboard
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agoMake export interface support CONFIG_SYS_MALLOC_SIMPLE
Simon Glass [Tue, 3 Mar 2015 15:03:01 +0000 (08:03 -0700)]
Make export interface support CONFIG_SYS_MALLOC_SIMPLE

When CONFIG_SYS_MALLOC_SIMPLE is defined, free() is a static inline. Make
sure that the export interface still builds in this case.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoarm: spl: Allow board_init_r() to run with a larger stack
Simon Glass [Tue, 3 Mar 2015 15:03:00 +0000 (08:03 -0700)]
arm: spl: Allow board_init_r() to run with a larger stack

At present SPL uses a single stack, either CONFIG_SPL_STACK or
CONFIG_SYS_INIT_SP_ADDR. Since some SPL features (such as MMC and
environment) require a lot of stack, some boards set CONFIG_SPL_STACK to
point into SDRAM. They then set up SDRAM very early, before board_init_f(),
so that the larger stack can be used.

This is an abuse of lowlevel_init(). That function should only be used for
essential start-up code which cannot be delayed. An example of a valid use is
when only part of the SPL code is visible/executable, and the SoC must be set
up so that board_init_f() can be reached. It should not be used for SDRAM
init, console init, etc.

Add a CONFIG_SPL_STACK_R option, which allows the stack to be moved to a new
address before board_init_r() is called in SPL.

The expected SPL flow (for CONFIG_SPL_FRAMEWORK) is documented in the README.

Signed-off-by: Simon Glass <sjg@chromium.org>
For version 1:
Acked-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
3 years agodm: tegra: Enable driver model in SPL and adjust the GPIO driver
Simon Glass [Tue, 3 Mar 2015 15:02:59 +0000 (08:02 -0700)]
dm: tegra: Enable driver model in SPL and adjust the GPIO driver

Use the full driver model GPIO and serial drivers in SPL now that these are
supported. Since device tree is not available they will use platform data.

Remove the special SPL GPIO function as it is no longer needed.

This is all in one commit to maintain bisectability.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoarm: spl: Avoid setting up a duplicate global data structure
Simon Glass [Tue, 3 Mar 2015 15:02:58 +0000 (08:02 -0700)]
arm: spl: Avoid setting up a duplicate global data structure

This is already set up in crt0.S. We don't need a new structure and don't
really want one in the 'data' section of the image, since it will be empty
and crt0.S's changes will be ignored.

As an interim measure, remove it only if CONFIG_DM is not defined. This
allows us to press ahead with driver model in SPL and allow the stragglers
to catch up.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoarm: Reduce the scope of lowlevel_init()
Simon Glass [Tue, 3 Mar 2015 15:02:57 +0000 (08:02 -0700)]
arm: Reduce the scope of lowlevel_init()

This function has grown into something of a monster. Some boards are setting
up a console and DRAM here in SPL. This requires global_data which should be
set up in one place (crt0.S).

There is no need for SPL to use s_init() for anything since board_init_f()
is called immediately afterwards.

Signed-off-by: Simon Glass <sjg@chromium.org>
3 years agoMerge branch 'master' of git://git.denx.de/u-boot-samsung
Tom Rini [Wed, 4 Mar 2015 13:18:02 +0000 (08:18 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-samsung

3 years agoOdroid U3: use common code for dram reservation
Przemyslaw Marczak [Tue, 17 Feb 2015 13:50:27 +0000 (14:50 +0100)]
Odroid U3: use common code for dram reservation

This commit removes the dram reservation from board file,
because it is done in a common code.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
3 years agoOdroid-XU3: enable the last dram bank and reserve 22MiB
Przemyslaw Marczak [Tue, 17 Feb 2015 13:50:26 +0000 (14:50 +0100)]
Odroid-XU3: enable the last dram bank and reserve 22MiB

This commit enables the last DRAM bank and reserves
the last 22 MiB of it, for the secure firmware.

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Hyungwon Hwang <human.hwang@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
3 years agoboard: samsung: reserve memory for the secure firmware
Przemyslaw Marczak [Tue, 17 Feb 2015 13:50:25 +0000 (14:50 +0100)]
board: samsung: reserve memory for the secure firmware

Since more than one board requires memory reservation
for the secure firmware, the reservation code can be
made in a common code.
Now, to reserve some part of the the last bank,
board config should define:
- CONFIG_TZSW_RESERVED_DRAM - len in bytes
- CONFIG_NR_DRAM_BANKS - number of memory banks

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Hyungwon Hwang <human.hwang@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
3 years agosamsung: board: fix: Define loop iterator as an unsigned int to suppress gcc 4.8...
Łukasz Majewski [Wed, 4 Mar 2015 09:54:48 +0000 (10:54 +0100)]
samsung: board: fix: Define loop iterator as an unsigned int to suppress gcc 4.8 warning

This patch suppress following warning:

board/samsung/common/board.c:95:32: warning: iteration 4u invokes undefined behavior [-Waggressive-loop-optimizations]
   addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
                                ^
board/samsung/common/board.c:94:2: note: containing loop

about possible signed integer overflow at gcc 4.8.2 (odroid board)

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
3 years agoPrepare v2015.04-rc3
Tom Rini [Tue, 3 Mar 2015 23:08:39 +0000 (18:08 -0500)]
Prepare v2015.04-rc3

Signed-off-by: Tom Rini <trini@konsulko.com>
3 years agompc837xerdb: "fix Calling __hwconfig without a buffer" warning
Sinan Akman [Wed, 21 Jan 2015 01:47:01 +0000 (20:47 -0500)]
mpc837xerdb: "fix Calling __hwconfig without a buffer" warning

Signed-off-by: Sinan Akman <sinan@writeme.com>
3 years agoMerge branch 'xnext/zynqmp' of git://www.denx.de/git/u-boot-microblaze
Tom Rini [Mon, 2 Mar 2015 18:22:12 +0000 (13:22 -0500)]
Merge branch 'xnext/zynqmp' of git://denx.de/git/u-boot-microblaze

3 years agoarm64: Add Xilinx ZynqMP support
Michal Simek [Thu, 15 Jan 2015 09:01:51 +0000 (10:01 +0100)]
arm64: Add Xilinx ZynqMP support

Add basic Xilinx ZynqMP arm64 support.
Serial and SD is supported.
It supports emulation platfrom ep108 and QEMU.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
3 years agoatngwmkii: convert to generic board
Andreas Bießmann [Sun, 1 Mar 2015 21:01:13 +0000 (22:01 +0100)]
atngwmkii: convert to generic board

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
3 years agokconfig: remove unneeded U-Boot extension code
Masahiro Yamada [Fri, 27 Feb 2015 15:45:26 +0000 (00:45 +0900)]
kconfig: remove unneeded U-Boot extension code

This code was introduced to support the multiple .config
configuration in U-Boot.  We do not need it any more.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
3 years agoserial: ns16550: Fix build error due to a typo
Axel Lin [Sat, 28 Feb 2015 07:55:36 +0000 (15:55 +0800)]
serial: ns16550: Fix build error due to a typo

Fix trivial typo.

Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
3 years agoMAINTAINERS, git-mailrc: Update my email address
Tom Rini [Mon, 2 Mar 2015 13:37:50 +0000 (08:37 -0500)]
MAINTAINERS, git-mailrc: Update my email address

Signed-off-by: Tom Rini <trini@konsulko.com>
3 years agoarmv7.h: Add <asm/io.h>
Tom Rini [Mon, 2 Mar 2015 13:24:45 +0000 (08:24 -0500)]
armv7.h: Add <asm/io.h>

With a389531 we now call readl() from this file so add <asm/io.h> so
that we have a prototype for the function.

Signed-off-by: Tom Rini <trini@konsulko.com>
3 years agoMerge git://git.denx.de/u-boot-usb
Tom Rini [Mon, 2 Mar 2015 12:24:27 +0000 (07:24 -0500)]
Merge git://git.denx.de/u-boot-usb

3 years agoMerge git://git.denx.de/u-boot-pxa
Tom Rini [Mon, 2 Mar 2015 12:24:15 +0000 (07:24 -0500)]
Merge git://git.denx.de/u-boot-pxa

3 years agowarp: Select BOUNCE_BUFFER and CMD_EXT options
Fabio Estevam [Sat, 28 Feb 2015 18:16:43 +0000 (15:16 -0300)]
warp: Select BOUNCE_BUFFER and CMD_EXT options

Add EXT2/EXT4 and BOUNCE_BUFFER support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
3 years agowarp: Add USB Mass Storage support
Fabio Estevam [Sat, 28 Feb 2015 18:16:42 +0000 (15:16 -0300)]
warp: Add USB Mass Storage support

With UMS support we are able to flash the eMMC from U-boot, which is very
convenient.

Add UMS support to make the eMMC flashing process easier.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
3 years agomx6slevk: Provide a proper pad configuration for OTG1_ID pin
Fabio Estevam [Sat, 28 Feb 2015 17:25:46 +0000 (14:25 -0300)]
mx6slevk: Provide a proper pad configuration for OTG1_ID pin

Pass the same pad configuration as done in the kernel so that OTG1_ID pin can
properly work in device mode.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
3 years agoMAINTAINERS: Add F: drivers/usb/gadget to DFU custodian responsibility
Lukasz Majewski [Thu, 26 Feb 2015 12:23:49 +0000 (13:23 +0100)]
MAINTAINERS: Add F: drivers/usb/gadget to DFU custodian responsibility

After discussion during the last u-boot mini summit with USB maintainer -
Marek Vasut - it has been decided, that gadget development should be
coordinated by DFU custodian.

Such patch formalizes current development status.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
3 years agopxa: colibri_pxa270: integrate latest validated register settings
Marcel Ziswiler [Sat, 28 Feb 2015 23:53:19 +0000 (00:53 +0100)]
pxa: colibri_pxa270: integrate latest validated register settings

Integrate latest validated register settings from Toradex WinCE BSP
4.2 working accross all module versions from early V1.x, V1.2D, V2.2B
to V2.4A.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3 years agopxa: colibri_pxa270: remove CONFIG_ENV_ADDR_REDUND
Marcel Ziswiler [Sat, 28 Feb 2015 23:53:18 +0000 (00:53 +0100)]
pxa: colibri_pxa270: remove CONFIG_ENV_ADDR_REDUND

Usually not required for NOR flash.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3 years agopxa: colibri_pxa270: fix wrong comment about voipac ethernet chip
Marcel Ziswiler [Sat, 28 Feb 2015 23:53:17 +0000 (00:53 +0100)]
pxa: colibri_pxa270: fix wrong comment about voipac ethernet chip

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3 years agopxa: colibri_pax270: fix CONFIG_BOOTCOMMAND
Marcel Ziswiler [Sat, 28 Feb 2015 23:53:16 +0000 (00:53 +0100)]
pxa: colibri_pax270: fix CONFIG_BOOTCOMMAND

While 'mmc init' is no longer required the address to bootm the kernel
from NOR flash was wrong.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3 years agopxa: colibri_pxa270: avoid overwriting factory configuration block
Marcel Ziswiler [Sat, 28 Feb 2015 23:53:15 +0000 (00:53 +0100)]
pxa: colibri_pxa270: avoid overwriting factory configuration block

Specify a CONFIG_BOARD_SIZE_LIMIT of 256 KB in order to avoid
overwriting the factory configuration block located at offset 0x40000
in NOR flash.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3 years agopxa: colibri_pxa270: disable loadb/s commands and long help
Marcel Ziswiler [Sat, 28 Feb 2015 23:53:14 +0000 (00:53 +0100)]
pxa: colibri_pxa270: disable loadb/s commands and long help

To save more than 20 KB of precious space in NOR flash get rid of the
following configuration options:

CONFIG_CMD_LOADB
CONFIG_CMD_LOADS
CONFIG_SYS_LONGHELP

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3 years agopxa: colibri_pxa270: migrate to generic board
Marcel Ziswiler [Sat, 28 Feb 2015 23:53:13 +0000 (00:53 +0100)]
pxa: colibri_pxa270: migrate to generic board

Migrate Toradex Colibri PXA270 to use CONFIG_SYS_GENERIC_BOARD.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
3 years agopxa: balloon3/colibri_pxa270: fix environment optionally being nowhere
Marcel Ziswiler [Sat, 28 Feb 2015 23:53:12 +0000 (00:53 +0100)]
pxa: balloon3/colibri_pxa270: fix environment optionally being nowhere

I couldn't quite figure out whether or not CONFIG_SYS_ENV_IS_NOWHERE
actually ever worked but nowadays this is called CONFIG_ENV_IS_NOWHERE.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3 years agopxa: balloon3: fix comment about sdram banks
Marcel Ziswiler [Sat, 28 Feb 2015 23:53:11 +0000 (00:53 +0100)]
pxa: balloon3: fix comment about sdram banks

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3 years agopxa: balloon3: remove nowhere used symbol CONFIG_SYS_MEM_BUF_IMP
Marcel Ziswiler [Sat, 28 Feb 2015 23:53:10 +0000 (00:53 +0100)]
pxa: balloon3: remove nowhere used symbol CONFIG_SYS_MEM_BUF_IMP

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3 years agoremove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
Marcel Ziswiler [Sat, 28 Feb 2015 23:53:09 +0000 (00:53 +0100)]
remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ

Basically finish what the following commit started a long time ago:

488f5d8790c451fc527fe5d2ef218f2a5e40ea17

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
For mx35pdk/woodburn:

Acked-by: Stefano Babic <sbabic@denx.de>
3 years agopxa: fix wrong comment about vpac270 being the arch number
Marcel Ziswiler [Sat, 28 Feb 2015 23:53:08 +0000 (00:53 +0100)]
pxa: fix wrong comment about vpac270 being the arch number

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
3 years agoimx6: Added DEK blob generator command
Raul Cardenas [Fri, 27 Feb 2015 17:22:06 +0000 (11:22 -0600)]
imx6: Added DEK blob generator command

Freescale's SEC block has built-in Data Encryption
Key(DEK) Blob Protocol which provides a method for
protecting a DEK for non-secure memory storage.
SEC block protects data in a data structure called
a Secret Key Blob, which provides both confidentiality
and integrity protection.
Every time the blob encapsulation is executed,
a AES-256 key is randomly generated to encrypt the DEK.
This key is encrypted with the OTP Secret key
from SoC. The resulting blob consists of the encrypted
AES-256 key, the encrypted DEK, and a 16-bit MAC.

During decapsulation, the reverse process is performed
to get back the original DEK. A caveat to the blob
decapsulation process,  is that the DEK is decrypted
in secure-memory and can only be read by FSL SEC HW.
The DEK is used to decrypt data during encrypted boot.

Commands added
--------------
  dek_blob - encapsulating DEK as a cryptgraphic blob

Commands Syntax
---------------
  dek_blob src dst len

    Encapsulate and create blob of a len-bits DEK at
    address src and store the result at address dst.

Signed-off-by: Raul Cardenas <Ulises.Cardenas@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Ulises Cardenas <ulises.cardenas@freescale.com>
Signed-off-by: Ulises Cardenas-B45798 <Ulises.Cardenas@freescale.com>
3 years agomx6sabre: Select CMD_EXT4 options
Fabio Estevam [Thu, 26 Feb 2015 19:58:56 +0000 (16:58 -0300)]
mx6sabre: Select CMD_EXT4 options

Add EXT4 support.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
3 years agomx6sabre: Enable User Mass Storage
Fabio Estevam [Thu, 26 Feb 2015 19:58:55 +0000 (16:58 -0300)]
mx6sabre: Enable User Mass Storage

User Mass Storage is very useful for flashing the on-board eMMC.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
3 years agoboard: tbs2910: Enable USB Mass Storage support
Soeren Moch [Thu, 26 Feb 2015 18:50:02 +0000 (19:50 +0100)]
board: tbs2910: Enable USB Mass Storage support

Add USB Mass Storage support. This is useful for flashing the on-board eMMC.

Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
3 years agomx35: Fix boot hang by avoiding vector relocation
Fabio Estevam [Mon, 23 Feb 2015 12:09:09 +0000 (09:09 -0300)]
mx35: Fix boot hang by avoiding vector relocation

Since commit 3ff46cc42b9d73d0 ("arm: relocate the exception vectors") mx35
does not boot anymore.

Add a specific relocate_vectors macro that skips the vector relocation, as the
i.MX35 SoC does not provide RAM at the high vectors address (0xFFFF0000), and
(0x00000000) maps to ROM.

This allows mx35 to boot again.

Cc: Sebastian Priebe <sebastian.priebe@cadcon.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Stefano Babic <sbabic@denx.de>
3 years agomx31: Fix boot hang by avoiding vector relocation
Fabio Estevam [Mon, 23 Feb 2015 12:09:08 +0000 (09:09 -0300)]
mx31: Fix boot hang by avoiding vector relocation

Since commit 3ff46cc42b9d73d0 ("arm: relocate the exception vectors") mx31
does not boot anymore.

Add a specific relocate_vectors macro that skips the vector relocation, as the
i.MX31 SoC does not provide RAM at the high vectors address (0xFFFF0000), and
(0x00000000) maps to ROM.

This allows mx31 to boot again.

Cc: Anatolij Gustschin <agust@denx.de>
Cc: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
3 years agomx25pdk: Turn on the LCD supply
Fabio Estevam [Sat, 21 Feb 2015 19:22:50 +0000 (17:22 -0200)]
mx25pdk: Turn on the LCD supply

Currently there is no support for MC34704 PMIC in the mainline kernel.

Turn on the LCD supply via bootloader for the time being, so that we could
use the LCD in the kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
3 years agomc34704: Add the definition of ONOFFA bit
Fabio Estevam [Sat, 21 Feb 2015 19:22:49 +0000 (17:22 -0200)]
mc34704: Add the definition of ONOFFA bit

ONOFFA is the bit 3 of the GENERAL2 register.

Add its definition.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
3 years agoMerge branch 'master' of git://git.denx.de/u-boot
Stefano Babic [Mon, 2 Mar 2015 08:42:53 +0000 (09:42 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot