omap-sw-develoment:linux-omap-dev.git
5 years agoLinux 3.2.32 v3.2.32
Ben Hutchings [Wed, 17 Oct 2012 02:50:15 +0000 (03:50 +0100)]
Linux 3.2.32

5 years agodrm/i915: clear fencing tracking state when retiring requests
Daniel Vetter [Wed, 11 Apr 2012 23:27:57 +0000 (01:27 +0200)]
drm/i915: clear fencing tracking state when retiring requests

commit 15a13bbdffb0d6288a5dd04aee9736267da1335f upstream.

This fixes a resume regression introduced in

commit 7dd4906586274f3945f2aeaaa5a33b451c3b4bba
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Mar 21 10:48:18 2012 +0000

    drm/i915: Mark untiled BLT commands as fenced on gen2/3

which fixed fencing tracking for untiled blt commands.

A side effect of that patch was that now also untiled objects have a
non-zero obj->last_fenced_seqno to track when a fence can be set up
after a pipelined tiling change. Unfortunately this was only cleared
by the fence setup and teardown code, resulting in tons of untiled but
inactive objects with non-zero last_fenced_seqno.

Now after resume we completely reset the seqno tracking, both on the
driver side (by setting dev_priv->next_seqno = 1) and on the hw side
(by allocating a new hws page, which contains the seqnos). Hilarity
and indefinite waits ensued from the stale seqnos in
obj->last_fenced_seqno from before the suspend.

The fix is to properly clear the fencing tracking state like we
already do for the normal gpu rendering while moving objects off the
active list.

Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrm/i915: Mark untiled BLT commands as fenced on gen2/3
Chris Wilson [Wed, 21 Mar 2012 10:48:18 +0000 (10:48 +0000)]
drm/i915: Mark untiled BLT commands as fenced on gen2/3

commit 7dd4906586274f3945f2aeaaa5a33b451c3b4bba upstream.

The BLT commands on gen2/3 utilize the fence registers and so we cannot
modify any fences for the object whilst those commands are in flight.
Currently we marked tiled commands as occupying a fence, but forgot to
restrict the untiled commands from preventing a fence being assigned
before they were completed.

One side-effect is that we ten have to double check that a fence was
allocated for a fenced buffer during move-to-active.

Reported-by: Jiri Slaby <jirislaby@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43427
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47990
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Testcase: i-g-t/tests/gem_tiled_after_untiled_blt
Tested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: The nesting of if-statements in the old
 i915_gem_execbuffer_reserve() differs from pin_and_fence_object(),
 so don't move the assignment of obj->pending_fenced_gpu_access but
 adjust the boolean expression as recommended by Daniel Vetter.]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrm/i915: fix swizzle detection for gen3
Daniel Vetter [Wed, 14 Dec 2011 12:57:15 +0000 (13:57 +0100)]
drm/i915: fix swizzle detection for gen3

commit c9c4b6f6c28354f1df9bd288dc33ba7ae0e66aaa upstream.

It looks like the desktop variants of i915 and i945 also have the DCC
register to control dram channel interleave and cpu side bit6
swizzling.

Unfortunately internal Cspec/ConfigDB documentation for these ancient chips
have already been dropped and there seem to be no archives. Also
somebody thought the swizzling behaviour is surely a worthy secret to
keep and redacted any mention of these fields from the published Intel
datasheets.

I suspect the hw engineers were really proud of the page coloring
they've achieved in their first dual channel dram controller with
bit17 - after all Bspec explains in great length the optimal layout of
page frame numbers modulo 4 for the color and depth buffers, too.
Later on when they've started to work on VT-d they shamefully
discoverd their stupidity and tried to cover the tracks ...

Tested-by: Daniel Vetter <daniel.vetter@ffwll.ch> (i915g)
Tested-by: Pavel Ondračka <pavel.ondracka@email.cz> (i945g)
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42625
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoxHCI: handle command after aborting the command ring
Elric Fu [Wed, 27 Jun 2012 08:55:43 +0000 (16:55 +0800)]
xHCI: handle command after aborting the command ring

commit b63f4053cc8aa22a98e3f9a97845afe6c15d0a0d upstream.

According to xHCI spec section 4.6.1.1 and section 4.6.1.2,
after aborting a command on the command ring, xHC will
generate a command completion event with its completion
code set to Command Ring Stopped at least. If a command is
currently executing at the time of aborting a command, xHC
also generate a command completion event with its completion
code set to Command Abort. When the command ring is stopped,
software may remove, add, or rearrage Command Descriptors.

To cancel a command, software will initialize a command
descriptor for the cancel command, and add it into a
cancel_cmd_list of xhci. When the command ring is stopped,
software will find the command trbs described by command
descriptors in cancel_cmd_list and modify it to No Op
command. If software can't find the matched trbs, we can
think it had been finished.

This patch should be backported to kernels as old as 3.0, that contain
the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an
assertion to check for virt_dev=0 bug." That commit papers over a NULL
pointer dereference, and this patch fixes the underlying issue that
caused the NULL pointer dereference.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com>
[bwh: Backported to 3.2: inc_deq() needs an additional 'consumer' argument;
 Jonathan Nieder worked out that this should be false]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoe1000: fix lockdep splat in shutdown handler
Jesse Brandeburg [Wed, 4 Jan 2012 20:23:33 +0000 (20:23 +0000)]
e1000: fix lockdep splat in shutdown handler

commit 3a3847e007aae732d64d8fd1374126393e9879a3 upstream.

As reported by Steven Rostedt, e1000 has a lockdep splat added
during the recent merge window.  The issue is that
cancel_delayed_work is called while holding our private mutex.

There is no reason that I can see to hold the mutex during pci
shutdown, it was more just paranoia that I put the mutex_lock
around the call to e1000_down.

In a quick survey lots of drivers handle locking differently when
being called by the pci layer.  The assumption here is that we
don't need the mutexes' protection in this function because
the driver could not be unloaded while in the shutdown handler
which is only called at reboot or poweroff.

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agonetfilter: xt_limit: have r->cost != 0 case work
Jan Engelhardt [Fri, 21 Sep 2012 22:26:52 +0000 (22:26 +0000)]
netfilter: xt_limit: have r->cost != 0 case work

commit 82e6bfe2fbc4d48852114c4f979137cd5bf1d1a8 upstream.

Commit v2.6.19-rc1~1272^2~41 tells us that r->cost != 0 can happen when
a running state is saved to userspace and then reinstated from there.

Make sure that private xt_limit area is initialized with correct values.
Otherwise, random matchings due to use of uninitialized memory.

Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agonetfilter: limit, hashlimit: avoid duplicated inline
Florian Westphal [Mon, 7 May 2012 10:51:43 +0000 (10:51 +0000)]
netfilter: limit, hashlimit: avoid duplicated inline

commit 7a909ac70f6b0823d9f23a43f19598d4b57ac901 upstream.

credit_cap can be set to credit, which avoids inlining user2credits
twice. Also, remove inline keyword and let compiler decide.

old:
    684     192       0     876     36c net/netfilter/xt_limit.o
   4927     344      32    5303    14b7 net/netfilter/xt_hashlimit.o
now:
    668     192       0     860     35c net/netfilter/xt_limit.o
   4793     344      32    5169    1431 net/netfilter/xt_hashlimit.o

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoipvs: fix oops on NAT reply in br_nf context
Lin Ming [Sat, 7 Jul 2012 10:26:10 +0000 (18:26 +0800)]
ipvs: fix oops on NAT reply in br_nf context

commit 9e33ce453f8ac8452649802bee1f410319408f4b upstream.

IPVS should not reset skb->nf_bridge in FORWARD hook
by calling nf_reset for NAT replies. It triggers oops in
br_nf_forward_finish.

[  579.781508] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
[  579.781669] IP: [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112
[  579.781792] PGD 218f9067 PUD 0
[  579.781865] Oops: 0000 [#1] SMP
[  579.781945] CPU 0
[  579.781983] Modules linked in:
[  579.782047]
[  579.782080]
[  579.782114] Pid: 4644, comm: qemu Tainted: G        W    3.5.0-rc5-00006-g95e69f9 #282 Hewlett-Packard  /30E8
[  579.782300] RIP: 0010:[<ffffffff817b1ca5>]  [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112
[  579.782455] RSP: 0018:ffff88007b003a98  EFLAGS: 00010287
[  579.782541] RAX: 0000000000000008 RBX: ffff8800762ead00 RCX: 000000000001670a
[  579.782653] RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff8800762ead00
[  579.782845] RBP: ffff88007b003ac8 R08: 0000000000016630 R09: ffff88007b003a90
[  579.782957] R10: ffff88007b0038e8 R11: ffff88002da37540 R12: ffff88002da01a02
[  579.783066] R13: ffff88002da01a80 R14: ffff88002d83c000 R15: ffff88002d82a000
[  579.783177] FS:  0000000000000000(0000) GS:ffff88007b000000(0063) knlGS:00000000f62d1b70
[  579.783306] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
[  579.783395] CR2: 0000000000000004 CR3: 00000000218fe000 CR4: 00000000000027f0
[  579.783505] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  579.783684] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  579.783795] Process qemu (pid: 4644, threadinfo ffff880021b20000, task ffff880021aba760)
[  579.783919] Stack:
[  579.783959]  ffff88007693cedc ffff8800762ead00 ffff88002da01a02 ffff8800762ead00
[  579.784110]  ffff88002da01a02 ffff88002da01a80 ffff88007b003b18 ffffffff817b26c7
[  579.784260]  ffff880080000000 ffffffff81ef59f0 ffff8800762ead00 ffffffff81ef58b0
[  579.784477] Call Trace:
[  579.784523]  <IRQ>
[  579.784562]
[  579.784603]  [<ffffffff817b26c7>] br_nf_forward_ip+0x275/0x2c8
[  579.784707]  [<ffffffff81704b58>] nf_iterate+0x47/0x7d
[  579.784797]  [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae
[  579.784906]  [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102
[  579.784995]  [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae
[  579.785175]  [<ffffffff8187fa95>] ? _raw_write_unlock_bh+0x19/0x1b
[  579.785179]  [<ffffffff817ac417>] __br_forward+0x97/0xa2
[  579.785179]  [<ffffffff817ad366>] br_handle_frame_finish+0x1a6/0x257
[  579.785179]  [<ffffffff817b2386>] br_nf_pre_routing_finish+0x26d/0x2cb
[  579.785179]  [<ffffffff817b2cf0>] br_nf_pre_routing+0x55d/0x5c1
[  579.785179]  [<ffffffff81704b58>] nf_iterate+0x47/0x7d
[  579.785179]  [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44
[  579.785179]  [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102
[  579.785179]  [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44
[  579.785179]  [<ffffffff81551525>] ? sky2_poll+0xb35/0xb54
[  579.785179]  [<ffffffff817ad62a>] br_handle_frame+0x213/0x229
[  579.785179]  [<ffffffff817ad417>] ? br_handle_frame_finish+0x257/0x257
[  579.785179]  [<ffffffff816e3b47>] __netif_receive_skb+0x2b4/0x3f1
[  579.785179]  [<ffffffff816e69fc>] process_backlog+0x99/0x1e2
[  579.785179]  [<ffffffff816e6800>] net_rx_action+0xdf/0x242
[  579.785179]  [<ffffffff8107e8a8>] __do_softirq+0xc1/0x1e0
[  579.785179]  [<ffffffff8135a5ba>] ? trace_hardirqs_off_thunk+0x3a/0x6c
[  579.785179]  [<ffffffff8188812c>] call_softirq+0x1c/0x30

The steps to reproduce as follow,

1. On Host1, setup brige br0(192.168.1.106)
2. Boot a kvm guest(192.168.1.105) on Host1 and start httpd
3. Start IPVS service on Host1
   ipvsadm -A -t 192.168.1.106:80 -s rr
   ipvsadm -a -t 192.168.1.106:80 -r 192.168.1.105:80 -m
4. Run apache benchmark on Host2(192.168.1.101)
   ab -n 1000 http://192.168.1.106/

ip_vs_reply4
  ip_vs_out
    handle_response
      ip_vs_notrack
        nf_reset()
        {
          skb->nf_bridge = NULL;
        }

Actually, IPVS wants in this case just to replace nfct
with untracked version. So replace the nf_reset(skb) call
in ip_vs_notrack() with a nf_conntrack_put(skb->nfct) call.

Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agonetfilter: nf_ct_expect: fix possible access to uninitialized timer
Pablo Neira Ayuso [Thu, 16 Aug 2012 00:25:24 +0000 (02:25 +0200)]
netfilter: nf_ct_expect: fix possible access to uninitialized timer

commit 2614f86490122bf51eb7c12ec73927f1900f4e7d upstream.

In __nf_ct_expect_check, the function refresh_timer returns 1
if a matching expectation is found and its timer is successfully
refreshed. This results in nf_ct_expect_related returning 0.
Note that at this point:

- the passed expectation is not inserted in the expectation table
  and its timer was not initialized, since we have refreshed one
  matching/existing expectation.

- nf_ct_expect_alloc uses kmem_cache_alloc, so the expectation
  timer is in some undefined state just after the allocation,
  until it is appropriately initialized.

This can be a problem for the SIP helper during the expectation
addition:

 ...
 if (nf_ct_expect_related(rtp_exp) == 0) {
         if (nf_ct_expect_related(rtcp_exp) != 0)
                 nf_ct_unexpect_related(rtp_exp);
 ...

Note that nf_ct_expect_related(rtp_exp) may return 0 for the timer refresh
case that is detailed above. Then, if nf_ct_unexpect_related(rtcp_exp)
returns != 0, nf_ct_unexpect_related(rtp_exp) is called, which does:

 spin_lock_bh(&nf_conntrack_lock);
 if (del_timer(&exp->timeout)) {
         nf_ct_unlink_expect(exp);
         nf_ct_expect_put(exp);
 }
 spin_unlock_bh(&nf_conntrack_lock);

Note that del_timer always returns false if the timer has been
initialized.  However, the timer was not initialized since setup_timer
was not called, therefore, the expectation timer remains in some
undefined state. If I'm not missing anything, this may lead to the
removal an unexistent expectation.

To fix this, the optimization that allows refreshing an expectation
is removed. Now nf_conntrack_expect_related looks more consistent
to me since it always add the expectation in case that it returns
success.

Thanks to Patrick McHardy for participating in the discussion of
this patch.

I think this may be the source of the problem described by:
http://marc.info/?l=netfilter-devel&m=134073514719421&w=2

Reported-by: Rafal Fitt <rafalf@aplusc.com.pl>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agonetfilter: nf_nat_sip: fix via header translation with multiple parameters
Patrick McHardy [Thu, 9 Aug 2012 10:08:47 +0000 (10:08 +0000)]
netfilter: nf_nat_sip: fix via header translation with multiple parameters

commit f22eb25cf5b1157b29ef88c793b71972efc47143 upstream.

Via-headers are parsed beginning at the first character after the Via-address.
When the address is translated first and its length decreases, the offset to
start parsing at is incorrect and header parameters might be missed.

Update the offset after translating the Via-address to fix this.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agonetfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation
Pablo Neira Ayuso [Wed, 29 Aug 2012 15:24:09 +0000 (15:24 +0000)]
netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation

commit 3f509c689a07a4aa989b426893d8491a7ffcc410 upstream.

We're hitting bug while trying to reinsert an already existing
expectation:

kernel BUG at kernel/timer.c:895!
invalid opcode: 0000 [#1] SMP
[...]
Call Trace:
 <IRQ>
 [<ffffffffa0069563>] nf_ct_expect_related_report+0x4a0/0x57a [nf_conntrack]
 [<ffffffff812d423a>] ? in4_pton+0x72/0x131
 [<ffffffffa00ca69e>] ip_nat_sdp_media+0xeb/0x185 [nf_nat_sip]
 [<ffffffffa00b5b9b>] set_expected_rtp_rtcp+0x32d/0x39b [nf_conntrack_sip]
 [<ffffffffa00b5f15>] process_sdp+0x30c/0x3ec [nf_conntrack_sip]
 [<ffffffff8103f1eb>] ? irq_exit+0x9a/0x9c
 [<ffffffffa00ca738>] ? ip_nat_sdp_media+0x185/0x185 [nf_nat_sip]

We have to remove the RTP expectation if the RTCP expectation hits EBUSY
since we keep trying with other ports until we succeed.

Reported-by: Rafal Fitt <rafalf@aplusc.com.pl>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agonetfilter: nf_ct_ipv4: packets with wrong ihl are invalid
Jozsef Kadlecsik [Tue, 3 Apr 2012 20:02:01 +0000 (22:02 +0200)]
netfilter: nf_ct_ipv4: packets with wrong ihl are invalid

commit 07153c6ec074257ade76a461429b567cff2b3a1e upstream.

It was reported that the Linux kernel sometimes logs:

klogd: [2629147.402413] kernel BUG at net / netfilter /
nf_conntrack_proto_tcp.c: 447!
klogd: [1072212.887368] kernel BUG at net / netfilter /
nf_conntrack_proto_tcp.c: 392

ipv4_get_l4proto() in nf_conntrack_l3proto_ipv4.c and tcp_error() in
nf_conntrack_proto_tcp.c should catch malformed packets, so the errors
at the indicated lines - TCP options parsing - should not happen.
However, tcp_error() relies on the "dataoff" offset to the TCP header,
calculated by ipv4_get_l4proto().  But ipv4_get_l4proto() does not check
bogus ihl values in IPv4 packets, which then can slip through tcp_error()
and get caught at the TCP options parsing routines.

The patch fixes ipv4_get_l4proto() by invalidating packets with bogus
ihl value.

The patch closes netfilter bugzilla id 771.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agosched: Fix migration thread runtime bogosity
Mike Galbraith [Sat, 4 Aug 2012 03:44:14 +0000 (05:44 +0200)]
sched: Fix migration thread runtime bogosity

commit 8f6189684eb4e85e6c593cd710693f09c944450a upstream.

Make stop scheduler class do the same accounting as other classes,

Migration threads can be caught in the act while doing exec balancing,
leading to the below due to use of unmaintained ->se.exec_start.  The
load that triggered this particular instance was an apparently out of
control heavily threaded application that does system monitoring in
what equated to an exec bomb, with one of the VERY frequently migrated
tasks being ps.

%CPU   PID USER     CMD
99.3    45 root     [migration/10]
97.7    53 root     [migration/12]
97.0    57 root     [migration/13]
90.1    49 root     [migration/11]
89.6    65 root     [migration/15]
88.7    17 root     [migration/3]
80.4    37 root     [migration/8]
78.1    41 root     [migration/9]
44.2    13 root     [migration/2]

Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344051854.6739.19.camel@marge.simpson.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[Steven Rostedt: backport for 3.2.]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agohpsa: dial down lockup detection during firmware flash
Stephen M. Cameron [Tue, 1 May 2012 16:43:42 +0000 (11:43 -0500)]
hpsa: dial down lockup detection during firmware flash

commit e85c59746957fd6e3595d02cf614370056b5816e upstream.

Dial back the aggressiveness of the controller lockup detection thread.
Currently it will declare the controller to be locked up if it goes
for 10 seconds with no interrupts and no change in the heartbeat
register.  Dial back this to 30 seconds with no heartbeat change, and
also snoop the ioctl path and if a firmware flash command is detected,
dial it back further to 4 minutes until the firmware flash command
completes.  The reason for this is that during the firmware flash
operation, the controller apparently doesn't update the heartbeat
register as frequently as it is supposed to, and we can get a false
positive.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agor8169: 8168c and later require bit 0x20 to be set in Config2 for PME signaling.
Francois Romieu [Tue, 17 Apr 2012 09:12:01 +0000 (11:12 +0200)]
r8169: 8168c and later require bit 0x20 to be set in Config2 for PME signaling.

commit d387b427c973974dd619a33549c070ac5d0e089f upstream.

The new 84xx stopped flying below the radars.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agor8169: Config1 is read-only on 8168c and later.
Francois Romieu [Tue, 17 Apr 2012 09:10:11 +0000 (11:10 +0200)]
r8169: Config1 is read-only on 8168c and later.

commit 851e60221926a53344b4227879858bef841b0477 upstream.

Suggested by Hayes.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomempolicy: fix a memory corruption by refcount imbalance in alloc_pages_vma()
Mel Gorman [Tue, 9 Oct 2012 16:58:41 +0000 (17:58 +0100)]
mempolicy: fix a memory corruption by refcount imbalance in alloc_pages_vma()

commit 00442ad04a5eac08a98255697c510e708f6082e2 upstream.

Commit cc9a6c877661 ("cpuset: mm: reduce large amounts of memory barrier
related damage v3") introduced a potential memory corruption.
shmem_alloc_page() uses a pseudo vma and it has one significant unique
combination, vma->vm_ops=NULL and vma->policy->flags & MPOL_F_SHARED.

get_vma_policy() does NOT increase a policy ref when vma->vm_ops=NULL
and mpol_cond_put() DOES decrease a policy ref when a policy has
MPOL_F_SHARED.  Therefore, when a cpuset update race occurs,
alloc_pages_vma() falls in 'goto retry_cpuset' path, decrements the
reference count and frees the policy prematurely.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomempolicy: fix refcount leak in mpol_set_shared_policy()
KOSAKI Motohiro [Mon, 8 Oct 2012 23:29:19 +0000 (16:29 -0700)]
mempolicy: fix refcount leak in mpol_set_shared_policy()

commit 63f74ca21f1fad36d075e063f06dcc6d39fe86b2 upstream.

When shared_policy_replace() fails to allocate new->policy is not freed
correctly by mpol_set_shared_policy().  The problem is that shared
mempolicy code directly call kmem_cache_free() in multiple places where
it is easy to make a mistake.

This patch creates an sp_free wrapper function and uses it. The bug was
introduced pre-git age (IOW, before 2.6.12-rc2).

[mgorman@suse.de: Editted changelog]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomempolicy: fix a race in shared_policy_replace()
Mel Gorman [Tue, 9 Oct 2012 16:58:39 +0000 (17:58 +0100)]
mempolicy: fix a race in shared_policy_replace()

commit b22d127a39ddd10d93deee3d96e643657ad53a49 upstream.

shared_policy_replace() use of sp_alloc() is unsafe.  1) sp_node cannot
be dereferenced if sp->lock is not held and 2) another thread can modify
sp_node between spin_unlock for allocating a new sp node and next
spin_lock.  The bug was introduced before 2.6.12-rc2.

Kosaki's original patch for this problem was to allocate an sp node and
policy within shared_policy_replace and initialise it when the lock is
reacquired.  I was not keen on this approach because it partially
duplicates sp_alloc().  As the paths were sp->lock is taken are not that
performance critical this patch converts sp->lock to sp->mutex so it can
sleep when calling sp_alloc().

[kosaki.motohiro@jp.fujitsu.com: Original patch]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomempolicy: remove mempolicy sharing
KOSAKI Motohiro [Mon, 8 Oct 2012 23:29:16 +0000 (16:29 -0700)]
mempolicy: remove mempolicy sharing

commit 869833f2c5c6e4dd09a5378cfc665ffb4615e5d2 upstream.

Dave Jones' system call fuzz testing tool "trinity" triggered the
following bug error with slab debugging enabled

    =============================================================================
    BUG numa_policy (Not tainted): Poison overwritten
    -----------------------------------------------------------------------------

    INFO: 0xffff880146498250-0xffff880146498250. First byte 0x6a instead of 0x6b
    INFO: Allocated in mpol_new+0xa3/0x140 age=46310 cpu=6 pid=32154
     __slab_alloc+0x3d3/0x445
     kmem_cache_alloc+0x29d/0x2b0
     mpol_new+0xa3/0x140
     sys_mbind+0x142/0x620
     system_call_fastpath+0x16/0x1b

    INFO: Freed in __mpol_put+0x27/0x30 age=46268 cpu=6 pid=32154
     __slab_free+0x2e/0x1de
     kmem_cache_free+0x25a/0x260
     __mpol_put+0x27/0x30
     remove_vma+0x68/0x90
     exit_mmap+0x118/0x140
     mmput+0x73/0x110
     exit_mm+0x108/0x130
     do_exit+0x162/0xb90
     do_group_exit+0x4f/0xc0
     sys_exit_group+0x17/0x20
     system_call_fastpath+0x16/0x1b

    INFO: Slab 0xffffea0005192600 objects=27 used=27 fp=0x          (null) flags=0x20000000004080
    INFO: Object 0xffff880146498250 @offset=592 fp=0xffff88014649b9d0

The problem is that the structure is being prematurely freed due to a
reference count imbalance. In the following case mbind(addr, len) should
replace the memory policies of both vma1 and vma2 and thus they will
become to share the same mempolicy and the new mempolicy will have the
MPOL_F_SHARED flag.

  +-------------------+-------------------+
  |     vma1          |     vma2(shmem)   |
  +-------------------+-------------------+
  |                                       |
 addr                                 addr+len

alloc_pages_vma() uses get_vma_policy() and mpol_cond_put() pair for
maintaining the mempolicy reference count.  The current rule is that
get_vma_policy() only increments refcount for shmem VMA and
mpol_conf_put() only decrements refcount if the policy has
MPOL_F_SHARED.

In above case, vma1 is not shmem vma and vma->policy has MPOL_F_SHARED!
The reference count will be decreased even though was not increased
whenever alloc_page_vma() is called.  This has been broken since commit
[52cd3b07: mempolicy: rework mempolicy Reference Counting] in 2008.

There is another serious bug with the sharing of memory policies.
Currently, mempolicy rebind logic (it is called from cpuset rebinding)
ignores a refcount of mempolicy and override it forcibly.  Thus, any
mempolicy sharing may cause mempolicy corruption.  The bug was
introduced by commit [68860ec1: cpusets: automatic numa mempolicy
rebinding].

Ideally, the shared policy handling would be rewritten to either
properly handle COW of the policy structures or at least reference count
MPOL_F_SHARED based exclusively on information within the policy.
However, this patch takes the easier approach of disabling any policy
sharing between VMAs.  Each new range allocated with sp_alloc will
allocate a new policy, set the reference count to 1 and drop the
reference count of the old policy.  This increases the memory footprint
but is not expected to be a major problem as mbind() is unlikely to be
used for fine-grained ranges.  It is also inefficient because it means
we allocate a new policy even in cases where mbind_range() could use the
new_policy passed to it.  However, it is more straight-forward and the
change should be invisible to the user.

[mgorman@suse.de: Edited changelog]
Reported-by: Dave Jones <davej@redhat.com>,
Cc: Christoph Lameter <cl@linux.com>,
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoefi: initialize efi.runtime_version to make query_variable_info/update_capsule workable
Seiji Aguchi [Tue, 24 Jul 2012 13:27:23 +0000 (13:27 +0000)]
efi: initialize efi.runtime_version to make query_variable_info/update_capsule workable

commit d6cf86d8f23253225fe2a763d627ecf7dfee9dae upstream.

A value of efi.runtime_version is checked before calling
update_capsule()/query_variable_info() as follows.
But it isn't initialized anywhere.

<snip>
static efi_status_t virt_efi_query_variable_info(u32 attr,
                                                 u64 *storage_space,
                                                 u64 *remaining_space,
                                                 u64 *max_variable_size)
{
        if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
                return EFI_UNSUPPORTED;
<snip>

This patch initializes a value of efi.runtime_version at boot time.

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrm/radeon: properly handle mc_stop/mc_resume on evergreen+ (v2)
Alex Deucher [Wed, 15 Aug 2012 21:18:42 +0000 (17:18 -0400)]
drm/radeon: properly handle mc_stop/mc_resume on evergreen+ (v2)

commit 62444b7462a2b98bc78d68736c03a7c4e66ba7e2 upstream.

- Stop the displays from accessing the FB
- Block CPU access
- Turn off MC client access

This should fix issues some users have seen, especially
with UEFI, when changing the MC FB location that result
in hangs or display corruption.

v2: fix crtc enabled check noticed by Luca Tettamanti

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[bwh: Backported to 3.2:
 - Drop DCE6 cases
 - Call evergreen_mc_wait_for_idle() directly
 - Add dce4_wait_for_vblank() (commits 3ae19b750bdc09ce233e1504348320141593ffda
   and 4a15903db02026728d0cf2755c6fabae16b8db6a) and call it directly
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoeCryptfs: Call lower ->flush() from ecryptfs_flush()
Tyler Hicks [Thu, 13 Sep 2012 01:38:00 +0000 (18:38 -0700)]
eCryptfs: Call lower ->flush() from ecryptfs_flush()

commit 64e6651dcc10e9d2cc6230208a8e6c2cfd19ae18 upstream.

Since eCryptfs only calls fput() on the lower file in
ecryptfs_release(), eCryptfs should call the lower filesystem's
->flush() from ecryptfs_flush().

If the lower filesystem implements ->flush(), then eCryptfs should try
to flush out any dirty pages prior to calling the lower ->flush(). If
the lower filesystem does not implement ->flush(), then eCryptfs has no
need to do anything in ecryptfs_flush() since dirty pages are now
written out to the lower filesystem in ecryptfs_release().

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoeCryptfs: Write out all dirty pages just before releasing the lower file
Tyler Hicks [Thu, 13 Sep 2012 01:02:46 +0000 (18:02 -0700)]
eCryptfs: Write out all dirty pages just before releasing the lower file

commit 7149f2558d5b5b988726662fe58b1c388337805b upstream.

Fixes a regression caused by:

821f749 eCryptfs: Revert to a writethrough cache model

That patch reverted some code (specifically, 32001d6f) that was
necessary to properly handle open() -> mmap() -> close() -> dirty pages
-> munmap(), because the lower file could be closed before the dirty
pages are written out.

Rather than reapplying 32001d6f, this approach is a better way of
ensuring that the lower file is still open in order to handle writing
out the dirty pages. It is called from ecryptfs_release(), while we have
a lock on the lower file pointer, just before the lower file gets the
final fput() and we overwrite the pointer.

https://launchpad.net/bugs/1047261

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Artemy Tregubenko <me@arty.name>
Tested-by: Artemy Tregubenko <me@arty.name>
Tested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoeCryptfs: Revert to a writethrough cache model
Tyler Hicks [Tue, 3 Jul 2012 23:50:57 +0000 (16:50 -0700)]
eCryptfs: Revert to a writethrough cache model

commit 821f7494a77627fb1ab539591c57b22cdca702d6 upstream.

A change was made about a year ago to get eCryptfs to better utilize its
page cache during writes. The idea was to do the page encryption
operations during page writeback, rather than doing them when initially
writing into the page cache, to reduce the number of page encryption
operations during sequential writes. This meant that the encrypted page
would only be written to the lower filesystem during page writeback,
which was a change from how eCryptfs had previously wrote to the lower
filesystem in ecryptfs_write_end().

The change caused a few eCryptfs-internal bugs that were shook out.
Unfortunately, more grave side effects have been identified that will
force changes outside of eCryptfs. Because the lower filesystem isn't
consulted until page writeback, eCryptfs has no way to pass lower write
errors (ENOSPC, mainly) back to userspace. Additionaly, it was reported
that quotas could be bypassed because of the way eCryptfs may sometimes
open the lower filesystem using a privileged kthread.

It would be nice to resolve the latest issues, but it is best if the
eCryptfs commits be reverted to the old behavior in the meantime.

This reverts:
32001d6f "eCryptfs: Flush file in vma close"
5be79de2 "eCryptfs: Flush dirty pages in setattr"
57db4e8d "ecryptfs: modify write path to encrypt page in writepage"

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Tested-by: Colin King <colin.king@canonical.com>
Cc: Colin King <colin.king@canonical.com>
Cc: Thieu Le <thieule@google.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoeCryptfs: Initialize empty lower files when opening them
Tyler Hicks [Thu, 21 Jun 2012 06:50:59 +0000 (23:50 -0700)]
eCryptfs: Initialize empty lower files when opening them

commit e3ccaa9761200952cc269b1f4b7d7bb77a5e071b upstream.

Historically, eCryptfs has only initialized lower files in the
ecryptfs_create() path. Lower file initialization is the act of writing
the cryptographic metadata from the inode's crypt_stat to the header of
the file. The ecryptfs_open() path already expects that metadata to be
in the header of the file.

A number of users have reported empty lower files in beneath their
eCryptfs mounts. Most of the causes for those empty files being left
around have been addressed, but the presence of empty files causes
problems due to the lack of proper cryptographic metadata.

To transparently solve this problem, this patch initializes empty lower
files in the ecryptfs_open() error path. If the metadata is unreadable
due to the lower inode size being 0, plaintext passthrough support is
not in use, and the metadata is stored in the header of the file (as
opposed to the user.ecryptfs extended attribute), the lower file will be
initialized.

The number of nested conditionals in ecryptfs_open() was getting out of
hand, so a helper function was created. To avoid the same nested
conditional problem, the conditional logic was reversed inside of the
helper function.

https://launchpad.net/bugs/911507

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoeCryptfs: Unlink lower inode when ecryptfs_create() fails
Tyler Hicks [Tue, 22 May 2012 20:09:50 +0000 (15:09 -0500)]
eCryptfs: Unlink lower inode when ecryptfs_create() fails

commit 8bc2d3cf612994a960c2e8eaea37f6676f67082a upstream.

ecryptfs_create() creates a lower inode, allocates an eCryptfs inode,
initializes the eCryptfs inode and cryptographic metadata attached to
the inode, and then writes the metadata to the header of the file.

If an error was to occur after the lower inode was created, an empty
lower file would be left in the lower filesystem. This is a problem
because ecryptfs_open() refuses to open any lower files which do not
have the appropriate metadata in the file header.

This patch properly unlinks the lower inode when an error occurs in the
later stages of ecryptfs_create(), reducing the chance that an empty
lower file will be left in the lower filesystem.

https://launchpad.net/bugs/872905

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoudf: fix retun value on error path in udf_load_logicalvol
Nikola Pajkovsky [Tue, 14 Aug 2012 22:38:08 +0000 (00:38 +0200)]
udf: fix retun value on error path in udf_load_logicalvol

commit 68766a2edcd5cd744262a70a2f67a320ac944760 upstream.

In case we detect a problem and bail out, we fail to set "ret" to a
nonzero value, and udf_load_logicalvol will mistakenly report success.

Signed-off-by: Nikola Pajkovsky <npajkovs@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoautofs4 - fix reset pending flag on mount fail
Ian Kent [Thu, 11 Oct 2012 00:00:33 +0000 (08:00 +0800)]
autofs4 - fix reset pending flag on mount fail

commit 49999ab27eab6289a8e4f450e148bdab521361b2 upstream.

In autofs4_d_automount(), if a mount fail occurs the AUTOFS_INF_PENDING
mount pending flag is not cleared.

One effect of this is when using the "browse" option, directory entry
attributes show up with all "?"s due to the incorrect callback and
subsequent failure return (when in fact no callback should be made).

Signed-off-by: Ian Kent <ikent@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agofirewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)
Stefan Richter [Sat, 6 Oct 2012 12:12:56 +0000 (14:12 +0200)]
firewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)

commit 790198f74c9d1b46b6a89504361b1a844670d050 upstream.

Fix two bugs of the /dev/fw* character device concerning the
FW_CDEV_IOC_GET_INFO ioctl with nonzero fw_cdev_get_info.bus_reset.
(Practically all /dev/fw* clients issue this ioctl right after opening
the device.)

Both bugs are caused by sizeof(struct fw_cdev_event_bus_reset) being 36
without natural alignment and 40 with natural alignment.

 1) Memory corruption, affecting i386 userland on amd64 kernel:
    Userland reserves a 36 bytes large buffer, kernel writes 40 bytes.
    This has been first found and reported against libraw1394 if
    compiled with gcc 4.7 which happens to order libraw1394's stack such
    that the bug became visible as data corruption.

 2) Information leak, affecting all kernel architectures except i386:
    4 bytes of random kernel stack data were leaked to userspace.

Hence limit the respective copy_to_user() to the 32-bit aligned size of
struct fw_cdev_event_bus_reset.

Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agohugetlb: do not use vma_hugecache_offset() for vma_prio_tree_foreach
Michal Hocko [Mon, 8 Oct 2012 23:33:31 +0000 (16:33 -0700)]
hugetlb: do not use vma_hugecache_offset() for vma_prio_tree_foreach

commit 36e4f20af833d1ce196e6a4ade05dc26c44652d1 upstream.

Commit 0c176d52b0b2 ("mm: hugetlb: fix pgoff computation when unmapping
page from vma") fixed pgoff calculation but it has replaced it by
vma_hugecache_offset() which is not approapriate for offsets used for
vma_prio_tree_foreach() because that one expects index in page units
rather than in huge_page_shift.

Johannes said:

: The resulting index may not be too big, but it can be too small: assume
: hpage size of 2M and the address to unmap to be 0x200000.  This is regular
: page index 512 and hpage index 1.  If you have a VMA that maps the file
: only starting at the second huge page, that VMAs vm_pgoff will be 512 but
: you ask for offset 1 and miss it even though it does map the page of
: interest.  hugetlb_cow() will try to unmap, miss the vma, and retry the
: cow until the allocation succeeds or the skipped vma(s) go away.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomm: hugetlb: fix pgoff computation when unmapping page from vma
Hillf Danton [Tue, 10 Jan 2012 23:08:19 +0000 (15:08 -0800)]
mm: hugetlb: fix pgoff computation when unmapping page from vma

commit 0c176d52b0b2619f231b2bbf329b90c028134f58 upstream.

The computation for pgoff is incorrect, at least with

(vma->vm_pgoff >> PAGE_SHIFT)

involved.  It is fixed with the available method if HPAGE_SIZE is
concerned in page cache lookup.

[akpm@linux-foundation.org: use vma_hugecache_offset() directly, per Michal]
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomm: thp: fix pmd_present for split_huge_page and PROT_NONE with THP
Andrea Arcangeli [Mon, 8 Oct 2012 23:33:27 +0000 (16:33 -0700)]
mm: thp: fix pmd_present for split_huge_page and PROT_NONE with THP

commit 027ef6c87853b0a9df53175063028edb4950d476 upstream.

In many places !pmd_present has been converted to pmd_none.  For pmds
that's equivalent and pmd_none is quicker so using pmd_none is better.

However (unless we delete pmd_present) we should provide an accurate
pmd_present too.  This will avoid the risk of code thinking the pmd is non
present because it's under __split_huge_page_map, see the pmd_mknotpresent
there and the comment above it.

If the page has been mprotected as PROT_NONE, it would also lead to a
pmd_present false negative in the same way as the race with
split_huge_page.

Because the PSE bit stays on at all times (both during split_huge_page and
when the _PAGE_PROTNONE bit get set), we could only check for the PSE bit,
but checking the PROTNONE bit too is still good to remember pmd_present
must always keep PROT_NONE into account.

This explains a not reproducible BUG_ON that was seldom reported on the
lists.

The same issue is in pmd_large, it would go wrong with both PROT_NONE and
if it races with split_huge_page.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomm: fix invalidate_complete_page2() lock ordering
Hugh Dickins [Mon, 8 Oct 2012 23:33:14 +0000 (16:33 -0700)]
mm: fix invalidate_complete_page2() lock ordering

commit ec4d9f626d5908b6052c2973f37992f1db52e967 upstream.

In fuzzing with trinity, lockdep protested "possible irq lock inversion
dependency detected" when isolate_lru_page() reenabled interrupts while
still holding the supposedly irq-safe tree_lock:

invalidate_inode_pages2
  invalidate_complete_page2
    spin_lock_irq(&mapping->tree_lock)
    clear_page_mlock
      isolate_lru_page
        spin_unlock_irq(&zone->lru_lock)

isolate_lru_page() is correct to enable interrupts unconditionally:
invalidate_complete_page2() is incorrect to call clear_page_mlock() while
holding tree_lock, which is supposed to nest inside lru_lock.

Both truncate_complete_page() and invalidate_complete_page() call
clear_page_mlock() before taking tree_lock to remove page from radix_tree.
 I guess invalidate_complete_page2() preferred to test PageDirty (again)
under tree_lock before committing to the munlock; but since the page has
already been unmapped, its state is already somewhat inconsistent, and no
worse if clear_page_mlock() moved up.

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Deciphered-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoARM: OMAP: counter: add locking to read_persistent_clock
Colin Cross [Mon, 8 Oct 2012 21:01:12 +0000 (14:01 -0700)]
ARM: OMAP: counter: add locking to read_persistent_clock

commit 9d7d6e363b06934221b81a859d509844c97380df upstream.

read_persistent_clock uses a global variable, use a spinlock to
ensure non-atomic updates to the variable don't overlap and cause
time to move backwards.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agommc: sdhci-s3c: fix the wrong number of max bus clocks
Jaehoon Chung [Wed, 19 Sep 2012 06:43:33 +0000 (14:43 +0800)]
mmc: sdhci-s3c: fix the wrong number of max bus clocks

commit 5feb54a1ab91a237e247c013b8c4fb100ea347b1 upstream.

We can use up to four bus-clocks; but on module remove, we didn't
disable the fourth bus clock.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoALSA: aloop - add locking to timer access
Omair Mohammed Abdullah [Sat, 29 Sep 2012 06:54:05 +0000 (12:24 +0530)]
ALSA: aloop - add locking to timer access

commit d4f1e48bd11e3df6a26811f7a1f06c4225d92f7d upstream.

When the loopback timer handler is running, calling del_timer() (for STOP
trigger) will not wait for the handler to complete before deactivating the
timer. The timer gets rescheduled in the handler as usual. Then a subsequent
START trigger will try to start the timer using add_timer() with a timer pending
leading to a kernel panic.

Serialize the calls to add_timer() and del_timer() using a spin lock to avoid
this.

Signed-off-by: Omair Mohammed Abdullah <omair.m.abdullah@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310
Felix Kaechele [Tue, 25 Sep 2012 23:20:44 +0000 (01:20 +0200)]
ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310

commit e4db0952e542090c605fd41d31d761f1b4624f4a upstream.

The Lenovo IdeaPad U310 has an internal mic where the right channel
is phase inverted.

Signed-off-by: Felix Kaechele <felix@fetzig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoALSA: HDA: Add inverted internal mic quirk for Lenovo S205
David Henningsson [Thu, 21 Jun 2012 14:03:01 +0000 (16:03 +0200)]
ALSA: HDA: Add inverted internal mic quirk for Lenovo S205

commit b3c5dce81584391af8b6dedb0647e65c17aab3a2 upstream.

The Lenovo Ideapad S205 has an internal mic where the right channel
is phase inverted.

BugLink: https://bugs.launchpad.net/bugs/884652
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoALSA: hda - Fix internal mic for Lenovo Ideapad U300s
David Henningsson [Mon, 2 Apr 2012 13:40:27 +0000 (15:40 +0200)]
ALSA: hda - Fix internal mic for Lenovo Ideapad U300s

commit 18dcd3044e4c4b3ab6341c98e8d0e81e0d58d5e3 upstream.

The internal mic input is phase inverted on one channel.
To avoid people in userspace summing the channels together
and get zero result, use a separate mixer control for the
inverted channel.

BugLink: https://bugs.launchpad.net/bugs/903853
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2:
 - Adjust context
 - Change both invocations of apply_pin_fixup()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agorapidio/rionet: fix multicast packet transmit logic
Alexandre Bounine [Fri, 5 Oct 2012 00:15:48 +0000 (17:15 -0700)]
rapidio/rionet: fix multicast packet transmit logic

commit 7c4a6106d6451fc03c491e61df37c044505d843a upstream.

Fix multicast packet transmit logic to account for repetitive transmission
of single skb:
- correct check for available buffers (this bug may produce NULL pointer
  crash dump in case of heavy traffic);
- update skb user count (incorrect user counter causes a warning dump from
  net_tx_action routine during multicast transfers in systems with three or
  more rionet participants).

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agolib/gcd.c: prevent possible div by 0
Davidlohr Bueso [Fri, 5 Oct 2012 00:13:18 +0000 (17:13 -0700)]
lib/gcd.c: prevent possible div by 0

commit e96875677fb2b7cb739c5d7769824dff7260d31d upstream.

Account for all properties when a and/or b are 0:
gcd(0, 0) = 0
gcd(a, 0) = a
gcd(0, b) = b

Fixes no known problems in current kernels.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agokernel/sys.c: call disable_nonboot_cpus() in kernel_restart()
Shawn Guo [Fri, 5 Oct 2012 00:12:23 +0000 (17:12 -0700)]
kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()

commit f96972f2dc6365421cf2366ebd61ee4cf060c8d5 upstream.

As kernel_power_off() calls disable_nonboot_cpus(), we may also want to
have kernel_restart() call disable_nonboot_cpus().  Doing so can help
machines that require boot cpu be the last alive cpu during reboot to
survive with kernel restart.

This fixes one reboot issue seen on imx6q (Cortex-A9 Quad).  The machine
requires that the restart routine be run on the primary cpu rather than
secondary ones.  Otherwise, the secondary core running the restart
routine will fail to come to online after reboot.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrivers/scsi/atp870u.c: fix bad use of udelay
Martin Michlmayr [Fri, 5 Oct 2012 00:11:25 +0000 (17:11 -0700)]
drivers/scsi/atp870u.c: fix bad use of udelay

commit 0f6d93aa9d96cc9022b51bd10d462b03296be146 upstream.

The ACARD driver calls udelay() with a value > 2000, which leads to to
the following compilation error on ARM:

  ERROR: "__bad_udelay" [drivers/scsi/atp870u.ko] undefined!
  make[1]: *** [__modpost] Error 1

This is because udelay is defined on ARM, roughly speaking, as

#define udelay(n) ((n) > 2000 ? __bad_udelay() : \
__const_udelay((n) * ((2199023U*HZ)>>11)))

The argument to __const_udelay is the number of jiffies to wait divided
by 4, but this does not work unless the multiplication does not
overflow, and that is what the build error is designed to prevent.  The
intended behavior can be achieved by using mdelay to call udelay
multiple times in a loop.

[jrnieder@gmail.com: adding context]
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agokbuild: make: fix if_changed when command contains backslashes
Sascha Hauer [Fri, 5 Oct 2012 00:11:17 +0000 (17:11 -0700)]
kbuild: make: fix if_changed when command contains backslashes

commit c353acba28fb3fa1fd05fd6b85a9fc7938330f9c upstream.

The call if_changed mechanism does not work when the command contains
backslashes.  This basically is an issue with lzo and bzip2 compressed
kernels.  The compressed binaries do not contain the uncompressed image
size, so these use size_append to append the size.  This results in
backslashes in the executed command.  With this if_changed always
detects a change in the command and rebuilds the compressed image even
if nothing has changed.

Fix this by escaping backslashes in make-cmd

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Bernhard Walle <bernhard@bwalle.de>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrivers/dma/dmaengine.c: lower the priority of 'failed to get' dma channel message
Fabio Estevam [Fri, 5 Oct 2012 00:11:16 +0000 (17:11 -0700)]
drivers/dma/dmaengine.c: lower the priority of 'failed to get' dma channel message

commit 0eb5a35801df3c438ce3fc91310a415ea4452c00 upstream.

Do the same as commit a03a202e95fd ("dmaengine: failure to get a
specific DMA channel is not critical") to get rid of the following
messages during kernel boot:

  dmaengine_get: failed to get dma1chan0: (-22)
  dmaengine_get: failed to get dma1chan1: (-22)
  dmaengine_get: failed to get dma1chan2: (-22)
  dmaengine_get: failed to get dma1chan3: (-22)
  ..

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: also apply changes to this logging statement
 from commit 634332502366 ('dmaengine: Cleanup logging messages')]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomn10300: only add -mmem-funcs to KBUILD_CFLAGS if gcc supports it
Geert Uytterhoeven [Fri, 5 Oct 2012 00:11:13 +0000 (17:11 -0700)]
mn10300: only add -mmem-funcs to KBUILD_CFLAGS if gcc supports it

commit 9957423f035c2071f6d1c5d2f095cdafbeb25ad7 upstream.

It seems the current (gcc 4.6.3) no longer provides this so make it
conditional.

As reported by Tony before, the mn10300 architecture cross-compiles with
gcc-4.6.3 if -mmem-funcs is not added to KBUILD_CFLAGS.

Reported-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrm/i915: Fix GT_MODE default value
Ben Widawsky [Thu, 4 Oct 2012 02:34:24 +0000 (19:34 -0700)]
drm/i915: Fix GT_MODE default value

commit f8f2ac9a76b0f80a6763ca316116a7bab8486997 upstream.

I can't even find how I figured this might be needed anymore. But sure
enough, the value I'm reading back on platforms doesn't match what the
docs recommends.

It seemed to fix Chris' GT1 in limited testing as well.

Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: open-code _MASKED_BIT_{ENABLE,DISABLE}]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrm/i915: call drm_handle_vblank before finish_page_flip
Daniel Vetter [Tue, 2 Oct 2012 15:54:35 +0000 (17:54 +0200)]
drm/i915: call drm_handle_vblank before finish_page_flip

commit 74d44445afb9f50126eba052adeb89827cee88f3 upstream.

... since finish_page_flip needs the vblank timestamp generated
in drm_handle_vblank. Somehow all the gmch platforms get it right,
but all the pch platform irq handlers get is wrong. Hooray for copy&
pasting!

Currently this gets papered over by a gross hack in finish_page_flip.
A second patch will remove that.

Note that without this, the new timestamp sanity checks in flip_test
occasionally get tripped up, hence the cc: stable tag.

Reviewed-by: mario.kleiner@tuebingen.mpg.de
Tested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: no loop over pipes in ivybridge_irq_handler(),
 so make a similar change to that in ironlake_irq_handler()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agolguest: fix occasional crash in example launcher.
Rusty Russell [Thu, 4 Oct 2012 02:33:25 +0000 (12:03 +0930)]
lguest: fix occasional crash in example launcher.

commit ca16f580a5db7e60bfafe59a50bb133bd3347491 upstream.

We usually got away with ->next on the final entry being NULL, but it
finally bit me.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoiscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values
Nicholas Bellinger [Wed, 3 Oct 2012 22:42:48 +0000 (15:42 -0700)]
iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values

commit cf0eb28d3ba60098865bf7dbcbfdd6b1cc483e3b upstream.

This patch increases the default for nopin_timeout to 15 seconds (wait
between sending a new NopIN ping) and nopin_response_timeout to 30 seconds
(wait for NopOUT response before failing the connection) in order to avoid
false positives by iSCSI Initiators who are not always able (under load) to
respond to NopIN echo PING requests within the current 5 second window.

False positives have been observed recently using Open-iSCSI code on v3.3.x
with heavy large-block READ workloads over small MTU 1 Gb/sec ports, and
increasing these values to more reasonable defaults significantly reduces
the possibility of false positive NopIN response timeout events under
this specific workload.

Historically these have been set low to initiate connection recovery as
soon as possible if we don't hear a ping back, but for modern v3.x code
on 1 -> 10 Gb/sec ports these new defaults make alot more sense.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agommc: sh-mmcif: avoid oops on spurious interrupts
Guennadi Liakhovetski [Tue, 18 Sep 2012 06:42:42 +0000 (06:42 +0000)]
mmc: sh-mmcif: avoid oops on spurious interrupts

commit 8464dd52d3198dd05cafb005371d76e5339eb842 upstream.

On some systems, e.g., kzm9g, MMCIF interfaces can produce spurious
interrupts without any active request. To prevent the Oops, that results
in such cases, don't dereference the mmc request pointer until we make
sure, that we are indeed processing such a request.

Reported-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agommc: omap_hsmmc: Pass on the suspend failure to the PM core
Vaibhav Bedia [Thu, 13 Sep 2012 06:31:03 +0000 (06:31 +0000)]
mmc: omap_hsmmc: Pass on the suspend failure to the PM core

commit c4c8eeb4df00aabb641553d6fbcd46f458e56cd9 upstream.

In some cases mmc_suspend_host() is not able to claim the
host and proceed with the suspend process. The core returns
-EBUSY to the host controller driver. Unfortunately, the
host controller driver does not pass on this information
to the PM core and hence the system suspend process continues.

ret = mmc_suspend_host(host->mmc);
if (ret) {
host->suspended = 0;
if (host->pdata->resume) {
ret = host->pdata->resume(dev, host->slot_id);

The return status from mmc_suspend_host() is overwritten by return
status from host->pdata->resume. So the original return status is lost.

In these cases the MMC core gets to an unexpected state
during resume and multiple issues related to MMC crop up.
1. Host controller driver starts accessing the device registers
before the clocks are enabled which leads to a prefetch abort.
2. A file copy thread which was launched before suspend gets
stuck due to the host not being reclaimed during resume.

To avoid such problems pass on the -EBUSY status to the PM core
from the host controller driver. With this change, MMC core
suspend might still fail but it does not end up making the
system unusable. Suspend gets aborted and the user can try
suspending the system again.

Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Acked-by: Venkatraman S <svenkatr@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
[bwh: Backported to 3.2:
 - Adjust context, indentation
 - s/dev/\&pdev->dev/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agokbuild: Fix gcc -x syntax
Jean Delvare [Tue, 2 Oct 2012 14:42:36 +0000 (16:42 +0200)]
kbuild: Fix gcc -x syntax

commit b1e0d8b70fa31821ebca3965f2ef8619d7c5e316 upstream.

The correct syntax for gcc -x is "gcc -x assembler", not
"gcc -xassembler". Even though the latter happens to work, the former
is what is documented in the manual page and thus what gcc wrappers
such as icecream do expect.

This isn't a cosmetic change. The missing space prevents icecream from
recognizing compilation tasks it can't handle, leading to silent kernel
miscompilations.

Besides me, credits go to Michael Matz and Dirk Mueller for
investigating the miscompilation issue and tracking it down to this
incorrect -x parameter syntax.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Bernhard Walle <bernhard@bwalle.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
[bwh: Backported to 3.2: drop unneeded change to arch/x86/Makefile]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoscripts/Kbuild.include: Fix portability problem of "echo -e"
Bernhard Walle [Sun, 26 Feb 2012 17:35:18 +0000 (18:35 +0100)]
scripts/Kbuild.include: Fix portability problem of "echo -e"

commit 875de98623fa2b29f0cb19915fe3292ab6daa1cb upstream.

"echo -e" is a GNU extension. When cross-compiling the kernel on a
BSD-like operating system (Mac OS X in my case), this doesn't work.

One could install a GNU version of echo, put that in the $PATH before
the system echo and use "/usr/bin/env echo", but the solution with
printf is simpler.

Since it is no disadvantage on Linux, I hope that gets accepted even if
cross-compiling the Linux kernel on another Unix operating system is
quite a rare use case.

Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
Andreas Bießmann <andreas@biessmann.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoiscsit: remove incorrect unlock in iscsit_build_sendtargets_resp
Christoph Hellwig [Wed, 26 Sep 2012 12:00:37 +0000 (08:00 -0400)]
iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp

commit 904753da183566c71211d23c169a80184648c121 upstream.

Fix a potential multiple spin-unlock -> deadlock scenario during the
overflow check within iscsit_build_sendtargets_resp() as found by
sparse static checking.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoiscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode
Nicholas Bellinger [Sun, 30 Sep 2012 19:20:02 +0000 (12:20 -0700)]
iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode

commit 38b11bae6ba02da352340aff12ee25755977b222 upstream.

We've had reports in the past about this specific case, so it's time to
go ahead and explicitly set cache_dynamic_acls=1 for generate_node_acls=1
(TPG demo-mode) operation.

During normal generate_node_acls=0 operation with explicit NodeACLs ->
se_node_acl memory is persistent to the configfs group located at
/sys/kernel/config/target/$TARGETNAME/$TPGT/acls/$INITIATORNAME, so in
the generate_node_acls=1 case we want the reservation logic to reference
existing per initiator IQN se_node_acl memory (not to generate a new
se_node_acl), so go ahead and always set cache_dynamic_acls=1 when
TPG demo-mode is enabled.

Reported-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agotarget/file: Re-enable optional fd_buffered_io=1 operation
Nicholas Bellinger [Sun, 30 Sep 2012 00:15:37 +0000 (17:15 -0700)]
target/file: Re-enable optional fd_buffered_io=1 operation

commit b32f4c7ed85c5cee2a21a55c9f59ebc9d57a2463 upstream.

This patch re-adds the ability to optionally run in buffered FILEIO mode
(eg: w/o O_DSYNC) for device backends in order to once again use the
Linux buffered cache as a write-back storage mechanism.

This logic was originally dropped with mainline v3.5-rc commit:

commit a4dff3043c231d57f982af635c9d2192ee40e5ae
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date:   Wed May 30 16:25:41 2012 -0700

    target/file: Use O_DSYNC by default for FILEIO backends

This difference with this patch is that fd_create_virtdevice() now
forces the explicit setting of emulate_write_cache=1 when buffered FILEIO
operation has been enabled.

(v2: Switch to FDBD_HAS_BUFFERED_IO_WCE + add more detailed
     comment as requested by hch)

Reported-by: Ferry <iscsitmp@bananateam.nl>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrm/i915: Flush the pending flips on the CRTC before modification
Chris Wilson [Thu, 27 Sep 2012 20:25:58 +0000 (21:25 +0100)]
drm/i915: Flush the pending flips on the CRTC before modification

commit 5bb61643f6a70d48de9cfe91ad0fee0d618b6816 upstream.

This was meant to be the purpose of the
intel_crtc_wait_for_pending_flips() function which is called whilst
preparing the CRTC for a modeset or before disabling. However, as Ville
Syrjala pointed out, we set the pending flip notification on the old
framebuffer that is no longer attached to the CRTC by the time we come
to flush the pending operations. Instead, we can simply wait on the
pending unpin work to be finished on this CRTC, knowning that the
hardware has therefore finished modifying the registers, before proceeding
with our direct access.

Fixes i-g-t/flip_test on non-pch platforms. pch platforms simply
schedule the flip immediately when the pipe is disabled, leading
to other funny issues.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Added i-g-t note and cc: stable]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agopnfsblock: fix partial page buffer wirte
Peng Tao [Thu, 23 Aug 2012 16:27:51 +0000 (00:27 +0800)]
pnfsblock: fix partial page buffer wirte

commit fe6e1e8d9fad86873eb74a26e80a8f91f9e870b5 upstream.

If applications use flock to protect its write range, generic NFS
will not do read-modify-write cycle at page cache level. Therefore
LD should know how to handle non-sector aligned writes. Otherwise
there will be data corruption.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
[bwh: Backported to Linux 3.2:
 - Adjust context
 - s/wdata->pages\.npages/wdata->npages/
 - s/header->pnfs_error/wdata->pnfs_error/
 - Drop change in missing out_mds exit path]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agolockd: use rpc client's cl_nodename for id encoding
Stanislav Kinsbursky [Tue, 18 Sep 2012 09:37:18 +0000 (13:37 +0400)]
lockd: use rpc client's cl_nodename for id encoding

commit 303a7ce92064c285a04c870f2dc0192fdb2968cb upstream.

Taking hostname from uts namespace if not safe, because this cuold be
performind during umount operation on child reaper death. And in this case
current->nsproxy is NULL already.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agolocalmodconfig: Fix localyesconfig to set to 'y' not 'm'
Yuta Ando [Mon, 1 Oct 2012 14:24:30 +0000 (23:24 +0900)]
localmodconfig: Fix localyesconfig to set to 'y' not 'm'

commit 4eae518d4b01b0cbf2f0d8edb5a6f3d6245ee8fb upstream.

The kbuild target 'localyesconfig' has been same as 'localmodconfig'
since the commit 50bce3e "kconfig/streamline_config.pl: merge
local{mod,yes}config". The commit expects this script generates
different configure depending on target, but it was not yet implemented.

So I added code that sets to 'yes' when target is 'localyesconfig'.

Link: http://lkml.kernel.org/r/1349101470-12243-1-git-send-email-yuta.and@gmail.com
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Yuta Ando <yuta.and@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@rostedt.homelinux.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoIB/srp: Avoid having aborted requests hang
Bart Van Assche [Fri, 24 Aug 2012 10:29:11 +0000 (10:29 +0000)]
IB/srp: Avoid having aborted requests hang

commit d8536670916a685df116b5c2cb256573fd25e4e3 upstream.

We need to call scsi_done() for commands after we abort them.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoIB/srp: Fix use-after-free in srp_reset_req()
Bart Van Assche [Fri, 24 Aug 2012 10:27:54 +0000 (10:27 +0000)]
IB/srp: Fix use-after-free in srp_reset_req()

commit 9b796d06d5d1b1e85ae2316a283ea11dd739ef96 upstream.

srp_free_req() uses the scsi_cmnd structure contents to unmap
buffers, so we must invoke srp_free_req() before we release
ownership of that structure.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoIPoIB: Fix use-after-free of multicast object
Patrick McHardy [Thu, 30 Aug 2012 07:01:30 +0000 (07:01 +0000)]
IPoIB: Fix use-after-free of multicast object

commit bea1e22df494a729978e7f2c54f7bda328f74bc3 upstream.

Fix a crash in ipoib_mcast_join_task().  (with help from Or Gerlitz)

Commit c8c2afe360b7 ("IPoIB: Use rtnl lock/unlock when changing device
flags") added a call to rtnl_lock() in ipoib_mcast_join_task(), which
is run from the ipoib_workqueue, and hence the workqueue can't be
flushed from the context of ipoib_stop().

In the current code, ipoib_stop() (which doesn't flush the workqueue)
calls ipoib_mcast_dev_flush(), which goes and deletes all the
multicast entries.  This takes place without any synchronization with
a possible running instance of ipoib_mcast_join_task() for the same
ipoib device, leading to a crash due to NULL pointer dereference.

Fix this by making sure that the workqueue is flushed before
ipoib_mcast_dev_flush() is called.  To make that possible, we move the
RTNL-lock wrapped code to ipoib_mcast_join_finish().

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomtd: nandsim: bugfix: fail if overridesize is too big
Richard Genoud [Wed, 12 Sep 2012 12:26:26 +0000 (14:26 +0200)]
mtd: nandsim: bugfix: fail if overridesize is too big

commit bb0a13a13411c4ce24c48c8ff3cdf7b48d237240 upstream.

If override size is too big, the module was actually loaded instead of
failing, because retval was not set.

This lead to memory corruption with the use of the freed structs nandsim
and nand_chip.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoJFFS2: don't fail on bitflips in OOB
Brian Norris [Fri, 31 Aug 2012 22:01:19 +0000 (15:01 -0700)]
JFFS2: don't fail on bitflips in OOB

commit 74d83beaa229aac7d126ac1ed9414658ff1a89d2 upstream.

JFFS2 was designed without thought for OOB bitflips, it seems, but they
can occur and will be reported to JFFS2 via mtd_read_oob()[1]. We don't
want to fail on these transactions, since the data was corrected.

[1] Few drivers report bitflips for OOB-only transactions. With such
    drivers, this patch should have no effect.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomtd: omap2: fix module loading
Andreas Bießmann [Fri, 31 Aug 2012 11:35:42 +0000 (13:35 +0200)]
mtd: omap2: fix module loading

commit 4d3d688da8e7016f15483e9319b41311e1db9515 upstream.

Unloading the omap2 nand driver missed to release the memory region which will
result in not being able to request it again if one want to load the driver
later on.

This patch fixes following error when loading omap2 module after unloading:
---8<---
~ $ rmmod omap2
~ $ modprobe omap2
[   37.420928] omap2-nand: probe of omap2-nand.0 failed with error -16
~ $
--->8---

This error was introduced in 67ce04bf2746f8a1f8c2a104b313d20c63f68378 which
was the first commit of this driver.

Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomtd: omap2: fix omap_nand_remove segfault
Andreas Bießmann [Fri, 31 Aug 2012 11:35:41 +0000 (13:35 +0200)]
mtd: omap2: fix omap_nand_remove segfault

commit 7d9b110269253b1d5858cfa57d68dfc7bf50dd77 upstream.

Do not kfree() the mtd_info; it is handled in the mtd subsystem and
already freed by nand_release(). Instead kfree() the struct
omap_nand_info allocated in omap_nand_probe which was not freed before.

This patch fixes following error when unloading the omap2 module:

---8<---
~ $ rmmod omap2
------------[ cut here ]------------
kernel BUG at mm/slab.c:3126!
Internal error: Oops - BUG: 0 [#1] PREEMPT ARM
Modules linked in: omap2(-)
CPU: 0    Not tainted  (3.6.0-rc3-00230-g155e36d-dirty #3)
PC is at cache_free_debugcheck+0x2d4/0x36c
LR is at kfree+0xc8/0x2ac
pc : [<c01125a0>]    lr : [<c0112efc>]    psr: 200d0193
sp : c521fe08  ip : c0e8ef90  fp : c521fe5c
r10: bf0001fc  r9 : c521e000  r8 : c0d99c8c
r7 : c661ebc0  r6 : c065d5a4  r5 : c65c4060  r4 : c78005c0
r3 : 00000000  r2 : 00001000  r1 : c65c4000  r0 : 00000001
Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5387d  Table: 86694019  DAC: 00000015
Process rmmod (pid: 549, stack limit = 0xc521e2f0)
Stack: (0xc521fe08 to 0xc5220000)
fe00:                   c008a874 c00bf44c c515c6d0 200d0193 c65c4860 c515c240
fe20: c521fe3c c521fe30 c008a9c0 c008a854 c521fe5c c65c4860 c78005c0 bf0001fc
fe40: c780ff40 a00d0113 c521e000 00000000 c521fe84 c521fe60 c0112efc c01122d8
fe60: c65c4860 c0673778 c06737ac 00000000 00070013 00000000 c521fe9c c521fe88
fe80: bf0001fc c0112e40 c0673778 bf001ca8 c521feac c521fea0 c02ca11c bf0001ac
fea0: c521fec4 c521feb0 c02c82c4 c02ca100 c0673778 bf001ca8 c521fee4 c521fec8
fec0: c02c8dd8 c02c8250 00000000 bf001ca8 bf001ca8 c0804ee0 c521ff04 c521fee8
fee0: c02c804c c02c8d20 bf001924 00000000 bf001ca8 c521e000 c521ff1c c521ff08
ff00: c02c950c c02c7fbc bf001d48 00000000 c521ff2c c521ff20 c02ca3a4 c02c94b8
ff20: c521ff3c c521ff30 bf001938 c02ca394 c521ffa4 c521ff40 c009beb4 bf001930
ff40: c521ff6c 70616d6f b6fe0032 c0014f84 70616d6f b6fe0032 00000081 60070010
ff60: c521ff84 c521ff70 c008e1f4 c00bf328 0001a004 70616d6f c521ff94 0021ff88
ff80: c008e368 0001a004 70616d6f b6fe0032 00000081 c0015028 00000000 c521ffa8
ffa0: c0014dc0 c009bcd0 0001a004 70616d6f bec2ab38 00000880 bec2ab38 00000880
ffc0: 0001a004 70616d6f b6fe0032 00000081 00000319 00000000 b6fe1000 00000000
ffe0: bec2ab30 bec2ab20 00019f00 b6f539c0 60070010 bec2ab38 aaaaaaaa aaaaaaaa
Backtrace:
[<c01122cc>] (cache_free_debugcheck+0x0/0x36c) from [<c0112efc>] (kfree+0xc8/0x2ac)
[<c0112e34>] (kfree+0x0/0x2ac) from [<bf0001fc>] (omap_nand_remove+0x5c/0x64 [omap2])
[<bf0001a0>] (omap_nand_remove+0x0/0x64 [omap2]) from [<c02ca11c>] (platform_drv_remove+0x28/0x2c)
 r5:bf001ca8 r4:c0673778
[<c02ca0f4>] (platform_drv_remove+0x0/0x2c) from [<c02c82c4>] (__device_release_driver+0x80/0xdc)
[<c02c8244>] (__device_release_driver+0x0/0xdc) from [<c02c8dd8>] (driver_detach+0xc4/0xc8)
 r5:bf001ca8 r4:c0673778
[<c02c8d14>] (driver_detach+0x0/0xc8) from [<c02c804c>] (bus_remove_driver+0x9c/0x104)
 r6:c0804ee0 r5:bf001ca8 r4:bf001ca8 r3:00000000
[<c02c7fb0>] (bus_remove_driver+0x0/0x104) from [<c02c950c>] (driver_unregister+0x60/0x80)
 r6:c521e000 r5:bf001ca8 r4:00000000 r3:bf001924
[<c02c94ac>] (driver_unregister+0x0/0x80) from [<c02ca3a4>] (platform_driver_unregister+0x1c/0x20)
 r5:00000000 r4:bf001d48
[<c02ca388>] (platform_driver_unregister+0x0/0x20) from [<bf001938>] (omap_nand_driver_exit+0x14/0x1c [omap2])
[<bf001924>] (omap_nand_driver_exit+0x0/0x1c [omap2]) from [<c009beb4>] (sys_delete_module+0x1f0/0x2ec)
[<c009bcc4>] (sys_delete_module+0x0/0x2ec) from [<c0014dc0>] (ret_fast_syscall+0x0/0x48)
 r8:c0015028 r7:00000081 r6:b6fe0032 r5:70616d6f r4:0001a004
Code: e1a00005 eb0d9172 e7f001f2 e7f001f2 (e7f001f2)
---[ end trace 6a30b24d8c0cc2ee ]---
Segmentation fault
--->8---

This error was introduced in 67ce04bf2746f8a1f8c2a104b313d20c63f68378 which
was the first commit of this driver.

Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomtd: mtdpart: break it as soon as we parse out the partitions
Huang Shijie [Sat, 18 Aug 2012 17:07:41 +0000 (13:07 -0400)]
mtd: mtdpart: break it as soon as we parse out the partitions

commit c51803ddba10d80d9f246066802c6e359cf1d44c upstream.

We may cause a memory leak when the @types has more then one parser.

Take the `default_mtd_part_types` for example. The default_mtd_part_types has
two parsers now: `cmdlinepart` and `ofpart`.

Assume the following case:
The kernel command line sets the partitions like:
#gpmi-nand:20m(boot),20m(kernel),1g(rootfs),-(user)
But the devicetree file(such as arch/arm/boot/dts/imx28-evk.dts) also sets
the same partitions as the kernel command line does.

In the current code, the partitions parsed out by the `ofpart` will
overwrite the @pparts which has already set by the `cmdlinepart` parser,
and the the partitions parsed out by the `cmdlinepart` is missed.
A memory leak occurs.

So we should break the code as soon as we parse out the partitions,
In actually, this patch makes a priority order between the parsers.
If one parser has already parsed out the partitions successfully,
it's no need to use another parser anymore.

Signed-off-by: Huang Shijie <shijie8@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agomtd: autcpu12-nvram: Fix compile breakage
Alexander Shiyan [Wed, 15 Aug 2012 16:28:05 +0000 (20:28 +0400)]
mtd: autcpu12-nvram: Fix compile breakage

commit d1f55c680e5d021e7066f4461dd678d42af18898 upstream.

Update driver autcpu12-nvram.c so it compiles; map_read32/map_write32
no longer exist in the kernel so the driver is totally broken.
Additionally, map_info name passed to simple_map_init is incorrect.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoInput: synaptics - adjust threshold for treating position values as negative
Seth Forshee [Fri, 28 Sep 2012 17:29:21 +0000 (10:29 -0700)]
Input: synaptics - adjust threshold for treating position values as negative

commit 824efd37415961d38821ecbd9694e213fb2e8b32 upstream.

Commit c039450 (Input: synaptics - handle out of bounds values from the
hardware) caused any hardware reported values over 7167 to be treated as
a wrapped-around negative value. It turns out that some firmware uses
the value 8176 to indicate a finger near the edge of the touchpad whose
actual position cannot be determined. This value now gets treated as
negative, which can cause pointer jumps and broken edge scrolling on
these machines.

I only know of one touchpad which reports negative values, and this
hardware never reports any value lower than -8 (i.e. 8184). Moving the
threshold for treating a value as negative up to 8176 should work fine
then for any hardware we currently know about, and since we're dealing
with unspecified behavior it's probably the best we can do. The special
8176 value is also likely to result in sudden jumps in position, so
let's also clamp this to the maximum specified value for the axis.

BugLink: http://bugs.launchpad.net/bugs/1046512
https://bugzilla.kernel.org/show_bug.cgi?id=46371

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Alan Swanson <swanson@ukfsn.org>
Tested-by: Arteom <arutemus@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agostaging: comedi: jr3_pci: fix iomem dereference
Ian Abbott [Thu, 27 Sep 2012 16:45:27 +0000 (17:45 +0100)]
staging: comedi: jr3_pci: fix iomem dereference

commit e1878957b4676a17cf398f7f5723b365e9a2ca48 upstream.

Correct a direct dereference of I/O memory to use an appropriate I/O
memory access function.  Note that the pointer being dereferenced is not
currently tagged with `__iomem` but I plan to correct that for 3.7.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agokbuild: Do not package /boot and /lib in make tar-pkg
Michal Marek [Tue, 25 Sep 2012 14:03:03 +0000 (16:03 +0200)]
kbuild: Do not package /boot and /lib in make tar-pkg

commit fe04ddf7c2910362f3817c8156e41cbd6c0ee35d upstream.

There were reports of users destroying their Fedora installs by a kernel
tarball that replaces the /lib -> /usr/lib symlink. Let's remove the
toplevel directories from the tarball to prevent this from happening.

Reported-by: Andi Kleen <andi@firstfloor.org>
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
[bwh: Fold in commit 3ce9e53e788881da0d5f3912f80e0dd6b501f304 to avoid
 conflicts]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrm/radeon: force MSIs on RS690 asics
Alex Deucher [Wed, 26 Sep 2012 16:40:45 +0000 (12:40 -0400)]
drm/radeon: force MSIs on RS690 asics

commit fb6ca6d154cdcd53e7f27f8dbba513830372699b upstream.

There are so many quirks, lets just try and force
this for all RS690s.  See:
https://bugs.freedesktop.org/show_bug.cgi?id=37679

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrm/radeon: Add MSI quirk for gateway RS690
Alex Deucher [Wed, 26 Sep 2012 16:31:45 +0000 (12:31 -0400)]
drm/radeon: Add MSI quirk for gateway RS690

commit 3a6d59df80897cc87812b6826d70085905bed013 upstream.

Fixes another system on:
https://bugs.freedesktop.org/show_bug.cgi?id=37679

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrm/radeon: only adjust default clocks on NI GPUs
Alex Deucher [Fri, 14 Sep 2012 14:59:26 +0000 (10:59 -0400)]
drm/radeon: only adjust default clocks on NI GPUs

commit 2e3b3b105ab3bb5b6a37198da4f193cd13781d13 upstream.

SI asics store voltage information differently so we
don't have a way to deal with it properly yet.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrm/i915: use adjusted_mode instead of mode for checking the 6bpc force flag
Jani Nikula [Wed, 26 Sep 2012 15:43:10 +0000 (18:43 +0300)]
drm/i915: use adjusted_mode instead of mode for checking the 6bpc force flag

commit 0c96c65b48fba3ffe9822a554cbc0cd610765cd5 upstream.

The dithering introduced in

commit 3b5c78a35cf7511c15e09a9b0ffab290a42d9bcf
Author: Adam Jackson <ajax@redhat.com>
Date:   Tue Dec 13 15:41:00 2011 -0800

    drm/i915/dp: Dither down to 6bpc if it makes the mode fit

stores the INTEL_MODE_DP_FORCE_6BPC flag in the private_flags of the
adjusted mode, while i9xx_crtc_mode_set() and ironlake_crtc_mode_set() use
the original mode, without the flag, so it would never have any
effect. However, the BPC was clamped by VBT settings, making things work by
coincidence, until that part was removed in

commit 4344b813f105a19f793f1fd93ad775b784648b95
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Aug 10 11:10:20 2012 +0200

Use adjusted_mode instead of mode when checking for
INTEL_MODE_DP_FORCE_6BPC to make the flag have effect.

v2: Don't forget to fix this in i9xx_crtc_mode_set() also, pointed out by
Daniel both before and after sending the first patch.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47621
CC: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2:
 - Adjust context
 - intel_choose_pipe_bpp_dither() doesn't take a drm_framebuffer argument]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agocoredump: prevent double-free on an error path in core dumper
Denys Vlasenko [Wed, 26 Sep 2012 01:34:50 +0000 (11:34 +1000)]
coredump: prevent double-free on an error path in core dumper

commit f34f9d186df35e5c39163444c43b4fc6255e39c5 upstream.

In !CORE_DUMP_USE_REGSET case, if elf_note_info_init fails to allocate
memory for info->fields, it frees already allocated stuff and returns
error to its caller, fill_note_info.  Which in turn returns error to its
caller, elf_core_dump.  Which jumps to cleanup label and calls
free_note_info, which will happily try to free all info->fields again.
BOOM.

This is the fix.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Venu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoext4: fix fdatasync() for files with only i_size changes
Jan Kara [Thu, 27 Sep 2012 01:52:20 +0000 (21:52 -0400)]
ext4: fix fdatasync() for files with only i_size changes

commit b71fc079b5d8f42b2a52743c8d2f1d35d655b1c5 upstream.

Code tracking when transaction needs to be committed on fdatasync(2) forgets
to handle a situation when only inode's i_size is changed. Thus in such
situations fdatasync(2) doesn't force transaction with new i_size to disk
and that can result in wrong i_size after a crash.

Fix the issue by updating inode's i_datasync_tid whenever its size is
updated.

Reported-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Signed-off-by: Jan Kara <jack@suse.cz>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoext4: always set i_op in ext4_mknod()
Bernd Schubert [Thu, 27 Sep 2012 01:24:57 +0000 (21:24 -0400)]
ext4: always set i_op in ext4_mknod()

commit 6a08f447facb4f9e29fcc30fb68060bb5a0d21c2 upstream.

ext4_special_inode_operations have their own ifdef CONFIG_EXT4_FS_XATTR
to mask those methods. And ext4_iget also always sets it, so there is
an inconsistency.

Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoserial: pl011: handle corruption at high clock speeds
Linus Walleij [Wed, 26 Sep 2012 15:21:36 +0000 (17:21 +0200)]
serial: pl011: handle corruption at high clock speeds

commit c5dd553b9fd069892c9e2de734f4f604e280fa7a upstream.

This works around a few glitches in the ST version of the PL011
serial driver when using very high baud rates, as we do in the
Ux500: 3, 3.25, 4 and 4.05 Mbps.

Problem Observed/rootcause:

When using high baud-rates, and the baudrate*8 is getting close to
the provided clock frequency (so a division factor close to 1), when
using bursts of characters (so they are abutted), then it seems as if
there is not enough time to detect the beginning of the start-bit which
is a timing reference for the entire character, and thus the sampling
moment of character bits is moving towards the end of each bit, instead
of the middle.

Fix:
Increase slightly the RX baud rate of the UART above the theoretical
baudrate by 5%. This will definitely give more margin time to the
UART_RX to correctly sample the data at the middle of the bit period.

Also fix the ages old copy-paste error in the very stressed comment,
it's referencing the registers used in the PL010 driver rather than
the PL011 ones.

Signed-off-by: Guillaume Jaunet <guillaume.jaunet@stericsson.com>
Signed-off-by: Christophe Arnal <christophe.arnal@stericsson.com>
Signed-off-by: Matthias Locher <matthias.locher@stericsson.com>
Signed-off-by: Rajanikanth HV <rajanikanth.hv@stericsson.com>
Cc: Bibek Basu <bibek.basu@stericsson.com>
Cc: Par-Gunnar Hjalmdahl <par-gunnar.hjalmdahl@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoserial: set correct baud_base for EXSYS EX-41092 Dual 16950
Flavio Leitner [Sat, 22 Sep 2012 00:04:34 +0000 (21:04 -0300)]
serial: set correct baud_base for EXSYS EX-41092 Dual 16950

commit 26e8220adb0aec43b7acafa0f1431760eee28522 upstream.

Apparently the same card model has two IDs, so this patch
complements the commit 39aced68d664291db3324d0fcf0985ab5626aac2
adding the missing one.

Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agostaging: comedi: s626: don't dereference insn->data
Ian Abbott [Mon, 24 Sep 2012 16:20:52 +0000 (17:20 +0100)]
staging: comedi: s626: don't dereference insn->data

commit b655c2c4782ed3e2e71d2608154e295a3e860311 upstream.

`s626_enc_insn_config()` is incorrectly dereferencing `insn->data` which
is a pointer to user memory.  It should be dereferencing the separate
`data` parameter that points to a copy of the data in kernel memory.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoext4: online defrag is not supported for journaled files
Dmitry Monakhov [Wed, 26 Sep 2012 16:32:54 +0000 (12:32 -0400)]
ext4: online defrag is not supported for journaled files

commit f066055a3449f0e5b0ae4f3ceab4445bead47638 upstream.

Proper block swap for inodes with full journaling enabled is
truly non obvious task. In order to be on a safe side let's
explicitly disable it for now.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoext4: move_extent code cleanup
Dmitry Monakhov [Wed, 26 Sep 2012 16:32:19 +0000 (12:32 -0400)]
ext4: move_extent code cleanup

commit 03bd8b9b896c8e940f282f540e6b4de90d666b7c upstream.

- Remove usless checks, because it is too late to check that inode != NULL
  at the moment it was referenced several times.
- Double lock routines looks very ugly and locking ordering relays on
  order of i_ino, but other kernel code rely on order of pointers.
  Let's make them simple and clean.
- check that inodes belongs to the same SB as soon as possible.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrm/i915: make sure we write all the DIP data bytes
Paulo Zanoni [Tue, 25 Sep 2012 16:23:34 +0000 (13:23 -0300)]
drm/i915: make sure we write all the DIP data bytes

commit adf00b26d18e1b3570451296e03bcb20e4798cdd upstream.

... even if the actual infoframe is smaller than the maximum possible
size.

If we don't write all the 32 DIP data bytes the InfoFrame ECC may not
be correctly calculated in some cases (e.g., when changing the port),
and this will lead to black screens on HDMI monitors. The ECC value is
generated by the hardware.

I don't see how this should break anything since we're writing 0 and
that should be the correct value, so this patch should be safe.

Notice that on IVB and older we actually have 64 bytes available for
VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the
others are either read-only ECC values or marked as "reserved". On HSW
we only have 32 bytes, and the ECC value is stored on its own separate
read-only register. See BSpec.

This patch fixes bug #46761, which is marked as a regression
introduced by commit 4e89ee174bb2da341bf90a84321c7008a3c9210d:
    drm/i915: set the DIP port on ibx_write_infoframe

Before commit 4e89 we were just failing to send AVI infoframes when we
needed to change the port, which can lead to black screens in some
cases. After commit 4e89 we started sending infoframes, but with a
possibly wrong ECC value. After this patch I hope we start sending
correct infoframes.

Version 2:
  - Improve commit message
  - Try to make the code more clear

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: only two write_infoframe functions to be modified]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agodrm/i915: add some barriers when changing DIPs
Paulo Zanoni [Mon, 28 May 2012 19:43:00 +0000 (16:43 -0300)]
drm/i915: add some barriers when changing DIPs

commit 9d9740f099f2eaf309c4c9cbc0d732507140db28 upstream.

On IVB and older, we basically have two registers: the control and the
data register. We write a few consecutitve times to the control
register, and we need these writes to arrive exactly in the specified
order.

Also, when we're changing the data register, we need to guarantee that
anything written to the control register already arrived (since
changing the control register can change where the data register
points to). Also, we need to make sure all the writes to the data
register happen exactly in the specified order, and we also *can't*
read the data register during this process, since reading and/or
writing it will change the place it points to.

So invoke the "better safe than sorry" rule and just be careful and
put barriers everywhere :)

On HSW we still have a control register that we write many times, but
we have many data registers.

Demanded-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2:
 - There are only two write_infoframe functions to be modified
 - The other VIDEO_DIP_CTL writes are in entirely different functions]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoxhci: Intel Panther Point BEI quirk.
Sarah Sharp [Wed, 19 Sep 2012 23:27:26 +0000 (16:27 -0700)]
xhci: Intel Panther Point BEI quirk.

commit 80fab3b244a22e0ca539d2439bdda50e81e5666f upstream.

When a device with an isochronous endpoint is behind a hub plugged into
the Intel Panther Point xHCI host controller, and the driver submits
multiple frames per URB, the xHCI driver will set the Block Event
Interrupt (BEI) flag on all but the last TD for the URB.  This causes
the host controller to place an event on the event ring, but not send an
interrupt.  When the last TD for the URB completes, BEI is cleared, and
we get an interrupt for the whole URB.

However, under a Panther Point xHCI host controller, if the parent hub
is unplugged when one or more events from transfers with BEI set are on
the event ring, a port status change event is placed on the event ring,
but no interrupt is generated.  This means URBs stop completing, and the
USB device disconnect is not noticed.  Something like a USB headset will
cause mplayer to hang when the device is disconnected.

If another transfer is sent (such as running `sudo lsusb -v`), the next
transfer event seems to "unstick" the event ring, the xHCI driver gets
an interrupt, and the disconnect is reported to the USB core.

The fix is not to use the BEI flag under the Panther Point xHCI host.
This will impact power consumption and system responsiveness, because
the xHCI driver will receive an interrupt for every frame in all
isochronous URBs instead of once per URB.

Intel chipset developers confirm that this bug will be hit if the BEI
flag is used on any endpoint, not just ones that are behind a hub.

This patch should be backported to kernels as old as 3.0, that contain
the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support
EHCI/xHCI port switching."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoath9k: Disable ASPM only for AR9285
Sujith Manoharan [Fri, 21 Sep 2012 18:44:28 +0000 (00:14 +0530)]
ath9k: Disable ASPM only for AR9285

commit 046b6802c8d3c8a57448485513bf7291633e0fa3 upstream.

Currently, ASPM is disabled for all WLAN+BT combo chipsets
when BTCOEX is enabled. This is incorrect since the workaround
is required only for WB195, which is a AR9285+AR3011 combo
solution. Fix this by checking for the HW version when enabling
the workaround.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Tested-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: ath9k_hw_get_btcoex_scheme() function is missing]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoACPI: run _OSC after ACPI_FULL_INITIALIZATION
Lin Ming [Mon, 16 Jul 2012 08:30:21 +0000 (16:30 +0800)]
ACPI: run _OSC after ACPI_FULL_INITIALIZATION

commit fc54ab72959edbf229b65ac74b2f122d799ca002 upstream.

The _OSC method may exist in module level code,
so it must be called after ACPI_FULL_INITIALIZATION

On some new platforms with Zero-Power-Optical-Disk-Drive (ZPODD)
support, this fix is necessary to save power.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Tested-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoUSB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
Antonio Ospite [Sun, 23 Sep 2012 07:57:25 +0000 (09:57 +0200)]
USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support

commit 54575b05af36959dfb6a49a3e9ca0c2b456b7126 upstream.

TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA) is an FTDI FT2232H
based device which provides an easily accessible JTAG, SPI, I2C, serial
breakout.

http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-serial.html
http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User%27s_Manual

FTDI FT2232H provides two serial channels (A and B), but on the TUMPA
channel A is dedicated to JTAG/SPI while channel B can be used for
UART/RS-232: use the ftdi_jtag_quirk to expose only channel B as
a usb-serial interface to userspace.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agousb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
Vivek Gautam [Sat, 22 Sep 2012 12:41:19 +0000 (18:11 +0530)]
usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems

commit 457a73d346187c2cc5d599072f38676f18f130e0 upstream.

In 71c731a: usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
when extracting DMI strings (vendor or product_name) to mark them as quirk
we may get NULL pointer in case of non-x86 systems which won't define
CONFIG_DMI. Hence susbsequent strstr() calls crash while driver probing.

So, returning 'false' here in case we get a NULL vendor or product_name.

This is tested with ARM (exynos) system.

This patch should be backported to stable kernels as old as 3.6, that
contain the commit 71c731a296f1b08a3724bd1b514b64f1bda87a23 "usb: host:
xhci: Fix Compliance Mode on SN65LVPE502CP Hardware"

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Sebastian Gottschall (DD-WRT) <s.gottschall@dd-wrt.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoIncrease XHCI suspend timeout to 16ms
Michael Spang [Fri, 14 Sep 2012 17:05:49 +0000 (13:05 -0400)]
Increase XHCI suspend timeout to 16ms

commit a6e097dfdfd189b6929af6efa1d289af61858386 upstream.

The Intel XHCI specification says that after clearing the run/stop bit
the controller may take up to 16ms to halt. We've seen a device take
14ms, which with the current timeout of 10ms causes the kernel to
abort the suspend. Increasing the timeout to the recommended value
fixes the problem.

This patch should be backported to kernels as old as 2.6.37, that
contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI:
PCI power management implementation".

Signed-off-by: Michael Spang <spang@chromium.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoscsi_dh_alua: Enable STPG for unavailable ports
Bart Van Assche [Fri, 24 Aug 2012 09:08:41 +0000 (09:08 +0000)]
scsi_dh_alua: Enable STPG for unavailable ports

commit e47f8976d8e573928824a06748f7bc82c58d747f upstream.

A quote from SPC-4: "While in the unavailable primary target port
asymmetric access state, the device server shall support those of
the following commands that it supports while in the active/optimized
state: [ ... ] d) SET TARGET PORT GROUPS; [ ... ]". Hence enable
sending STPG to a target port group that is in the unavailable state.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoscsi_remove_target: fix softlockup regression on hot remove
Dan Williams [Wed, 29 Aug 2012 05:12:10 +0000 (22:12 -0700)]
scsi_remove_target: fix softlockup regression on hot remove

commit bc3f02a795d3b4faa99d37390174be2a75d091bd upstream.

John reports:
 BUG: soft lockup - CPU#2 stuck for 23s! [kworker/u:8:2202]
 [..]
 Call Trace:
  [<ffffffff8141782a>] scsi_remove_target+0xda/0x1f0
  [<ffffffff81421de5>] sas_rphy_remove+0x55/0x60
  [<ffffffff81421e01>] sas_rphy_delete+0x11/0x20
  [<ffffffff81421e35>] sas_port_delete+0x25/0x160
  [<ffffffff814549a3>] mptsas_del_end_device+0x183/0x270

...introduced by commit 3b661a9 "[SCSI] fix hot unplug vs async scan race".

Don't restart lookup of more stargets in the multi-target case, just
arrange to traverse the list once, on the assumption that new targets
are always added at the end.  There is no guarantee that the target will
change state in scsi_target_reap() so we can end up spinning if we
restart.

Acked-by: Jack Wang <jack_wang@usish.com>
LKML-Reference: <CAEhu1-6wq1YsNiscGMwP4ud0Q+MrViRzv=kcWCQSBNc8c68N5Q@mail.gmail.com>
Reported-by: John Drescher <drescherjm@gmail.com>
Tested-by: John Drescher <drescherjm@gmail.com>
Signed-off-by: Dan Williams <djbw@fb.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agoibmvscsi: Fix host config length field overflow
Benjamin Herrenschmidt [Mon, 30 Jul 2012 01:33:05 +0000 (11:33 +1000)]
ibmvscsi: Fix host config length field overflow

commit 225c56960fcafeccc2b6304f96cd3f0dbf42a16a upstream.

The length field in the host config packet is only 16-bit long, so
passing it 0x10000 (64K which is our standard PAGE_SIZE) doesn't
work and result in an empty config from the server.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agozfcp: only access zfcp_scsi_dev for valid scsi_device
Martin Peschke [Tue, 4 Sep 2012 13:23:36 +0000 (15:23 +0200)]
zfcp: only access zfcp_scsi_dev for valid scsi_device

commit d436de8ce25f53a8a880a931886821f632247943 upstream.

__scsi_remove_device (e.g. due to dev_loss_tmo) calls
zfcp_scsi_slave_destroy which in turn sends a close LUN FSF request to
the adapter. After 30 seconds without response,
zfcp_erp_timeout_handler kicks the ERP thread failing the close LUN
ERP action. zfcp_erp_wait in zfcp_erp_lun_shutdown_wait and thus
zfcp_scsi_slave_destroy returns and then scsi_device is no longer
valid. Sometime later the response to the close LUN FSF request may
finally come in. However, commit
b62a8d9b45b971a67a0f8413338c230e3117dff5
"[SCSI] zfcp: Use SCSI device data zfcp_scsi_dev instead of zfcp_unit"
introduced a number of attempts to unconditionally access struct
zfcp_scsi_dev through struct scsi_device causing a use-after-free.
This leads to an Oops due to kernel page fault in one of:
zfcp_fsf_abort_fcp_command_handler, zfcp_fsf_open_lun_handler,
zfcp_fsf_close_lun_handler, zfcp_fsf_req_trace,
zfcp_fsf_fcp_handler_common.
Move dereferencing of zfcp private data zfcp_scsi_dev allocated in
scsi_device via scsi_transport_reserve_device after the check for
potentially aborted FSF request and thus no longer valid scsi_device.
Only then assign sdev_to_zfcp(sdev) to the local auto variable struct
zfcp_scsi_dev *zfcp_sdev.

Signed-off-by: Martin Peschke <mpeschke@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
5 years agozfcp: restore refcount check on port_remove
Steffen Maier [Tue, 4 Sep 2012 13:23:34 +0000 (15:23 +0200)]
zfcp: restore refcount check on port_remove

commit d99b601b63386f3395dc26a699ae703a273d9982 upstream.

Upstream commit f3450c7b917201bb49d67032e9f60d5125675d6a
"[SCSI] zfcp: Replace local reference counting with common kref"
accidentally dropped a reference count check before tearing down
zfcp_ports that are potentially in use by zfcp_units.
Even remote ports in use can be removed causing
unreachable garbage objects zfcp_ports with zfcp_units.
Thus units won't come back even after a manual port_rescan.
The kref of zfcp_port->dev.kobj is already used by the driver core.
We cannot re-use it to track the number of zfcp_units.
Re-introduce our own counter for units per port
and check on port_remove.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>