omap-sw-develoment:linux-omap-dev.git
2012-02-01 Sourav PoddarInput: smsc: update Makefile and Kconfig for smsc keypad omap5_platform_base_v3.1
2012-02-01 Sourav Poddaromap5: evm: Add smsc keypad board file data
2012-02-01 G, Manjunath... Input: keypad: Add smsc ece1099 keypad driver
2012-02-01 Kishore Kadiyalaomap5: evm: update omap5 board file for mpu6050
2012-02-01 Kishore Kadiyalainput: misc: mpu6050: Update makefile and menuconfig
2012-02-01 Kishore Kadiyalainput: misc: mpu6050: Adding mpu6050 driver
2012-02-01 Sourav PoddarInput: tsl2771: update Makefile and Kconfig for tsl2771...
2012-02-01 Sourav Poddaromap5: evm: Add ambient light and proximity to omap5...
2012-02-01 Dan MurphyInput: tsl2771: ambient light and proximity driver
2012-02-01 Sourav Poddaromap5: evm: Add tmp102 data to omap5 board file
2012-02-01 Sourav Poddaromap5: evm: Add bmp085 data to omap5 board file
2012-02-01 Balaji T Komap5: evm: Add mxt224 touchscreen data to omap5 board...
2012-02-01 Sourav Poddarinput: touch: mxt224: update driver file with object...
2012-02-01 Dan Murphyinput: touch: Update the touch driver for updated MT...
2012-02-01 Dan Murphyinput: touch: Update the reporting to use the multi...
2012-02-01 Dan Murphyinput: touch: atmel mxt224 touchscreen controller
2012-02-01 G, Manjunath... omap5: evm: Add omap5 onchip keypad board data
2012-02-01 G, Manjunath... Input: omap-keypad: dynamically handle register offsets
2012-02-01 Santosh ShilimkarARM: OMAP5: PM: Set MPUSS-L4PER clock-domain static...
2012-02-01 Per Forlinmmc: core: clarify how to use post_req in case of errors
2012-02-01 Keshava Munegowdaomap5: sata: Enable sata for omap5 evm build
2012-02-01 Keshava Munegowdaomap5: sata: Invoke sata device initialization
2012-02-01 Keshava Munegowdaomap5: sata: Adding sata device init file for compilation
2012-02-01 Keshava Munegowdaomap5: sata: AHCI sata support for OMAP5 socs
2012-02-01 Keshava MunegowdaARM: OMAP5: SATA: OCP2SCP3 hwmod update
2012-02-01 Keshava Munegowdaarm: omap5: sata: hwmod update
2012-02-01 Balaji T Karm: omap4: hsmmc: configure SDMMC1_DR0 properly
2012-02-01 Balaji T Karm: omap4: hsmmc: Fix Pbias configuration on regulator OFF
2012-02-01 Balaji T Karm: omap: hsmmc: enable context loss counter
2012-02-01 Balaji T Kmmc: omap: balance regulator calls
2012-02-01 Balaji T Karm: omap5evm: add ddr50 uhs capability to omap_hsmmc
2012-02-01 Balaji T Kmmc: omap: UHS-I voltage switch
2012-02-01 Balaji T Kregulator: palmas: ldo9: remove bypass mode
2012-02-01 Balaji T Kmmc: omap5: set debounce time for sd card detect gpio
2012-02-01 Balaji T Kmmc: omap: add cmd23 support
2012-02-01 Sourav Poddararm: omap: hsmmc: sparse warning fix
2012-02-01 Balaji T Kmmc: omap: hsmmc: Enable Auto CMD12
2012-02-01 Balaji T Karm: omap5evm: hsmmc: add DDR support
2012-02-01 Viswanath Puttaguntammc: Fix bug to enable DDR on MMC
2012-02-01 Balaji T Kmmc: omap: add DDR support to omap_hsmmc
2012-02-01 Balaji T Karm: omap5evm: mmc: enable hsmmc in evm defconfig
2012-02-01 Subhash Jadavanimmc: sd: Handle SD3.0 cards not supporting UHS-I bus...
2012-02-01 Balaji T Kmmc: omap: remove clock rate hard coding
2012-02-01 Sourav Poddarmmc: omap: Add HSMMC support in omap5 evm boardfile
2012-02-01 Per Forlinmmc: omap_hsmmc: DMA unmap only once in case of MMC...
2012-02-01 Adrian Huntermmc: omap_hsmmc: ensure pbias configuration is always...
2012-02-01 Balaji T Ki2c-omap: Keep I2C module enabled on NACK
2012-02-01 Balaji T Karm: omap5evm: vmmc: max voltage change and binding
2012-02-01 Balaji T Karm: omap5evm: add fixed regulator support for SDCARD...
2012-02-01 Paul Walmsleytty: serial: omap-serial: wakeup latency constraint...
2012-02-01 Paul Walmsleytty: serial: OMAP: use a 1-byte RX FIFO threshold in...
2012-02-01 Shubhrajyoti DOMAP5: UART: Add the extra ports in OMAP5
2012-02-01 Govindraj.ROAMP2+: UART: Make module wakeup configurable from...
2012-02-01 Vikram Panditatty: serial: omap-serial: fix software flow control
2012-02-01 Vikram Panditatty: serial: omap-serial: clear auto rts cts bits
2012-02-01 Govindraj.ROMAP2+: UART: Fix compilation/sparse warnings
2012-02-01 Govindraj.ROMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos
2012-02-01 Govindraj.ROMAP2+: UART: Do not gate uart clocks if used for debug...
2012-02-01 Govindraj.ROMAP2+: UART: Avoid uart idling on suspend for no_conso...
2012-02-01 Govindraj.ROMAP2+: UART: Avoid console uart idling during bootup
2012-02-01 Govindraj.ROMAP2+: UART: remove temporary variable used to count...
2012-02-01 Jon HunterOMAP2+: UART: Make the RX_TIMEOUT for DMA configurable...
2012-02-01 Deepak KOMAP2+: UART: Allow UART parameters to be configured...
2012-02-01 Govindraj.ROMAP2+: UART: Remove old and unused clocks handling...
2012-02-01 Govindraj.ROMAP2+: UART: Add wakeup mechanism for omap-uarts
2012-02-01 Govindraj.ROMAP2+: UART: Move errata handling from serial.c to...
2012-02-01 Govindraj.ROMAP2+: UART: Get context loss count to context restore
2012-02-01 Govindraj.ROMAP2+: UART: Remove uart reset function.
2012-02-01 Govindraj.ROMAP2+: UART: Ensure all reg values configured are...
2012-02-01 Govindraj.ROMAP2+: UART: Remove context_save and move context...
2012-02-01 Govindraj.ROMAP2+: UART: Add runtime pm support for omap-serial...
2012-02-01 Govindraj.ROMAP2+: UART: Remove mapbase/membase fields from pdata.
2012-02-01 Govindraj.ROMAP2+: UART: Add default mux for all uarts.
2012-02-01 Govindraj.ROMAP2+: UART: Cleanup part of clock gating mechanism...
2012-02-01 Govindraj.ROMAP2+: UART: cleanup 8250 console driver support
2012-02-01 Govindraj.ROMAP2+: UART: cleanup + remove uart pm specific API
2012-02-01 Govindraj.RAdd usb ehci, nfs filesystem smsc95xx and mass storage...
2012-02-01 Govindraj.ROMAP5: USB: Add port 3 hsic mode check.
2012-02-01 Govindraj.ROMAP5: Clock: fix utmi fclk
2012-02-01 Govindraj.ROMAP5: USB: Enable EHCI support for usb
2012-02-01 Govindraj.ROMAP5: EHCI: Add ehci port support for omap5 evm
2012-02-01 Govindraj.Romap: usb: add HSIC support for EHCI
2012-02-01 Kishon Vijay... OMAP5: usbhs: clock configuration for HSIC
2012-02-01 Kishon Vijay... OMAP5: usbhs: Add mux initialization for ehci to suppor...
2012-02-01 Ming Leiusb: ehci: remove the 1st wmb in qh_append_tds
2012-02-01 Ming Leiusb: ehci: only prepare zero packet for out transfer...
2012-02-01 Ming Leiusb: ehci: remove wmb in qh_update
2012-02-01 Keshava MunegowdaARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue
2012-02-01 Keshava MunegowdaARM: OMAP: change the USB TLL function and interface...
2012-02-01 Keshava MunegowdaARM: OMAP: USB: Invoke the TLL driver from USB HS core...
2012-02-01 Keshava MunegowdaARM: OMAP: USB: Remove TLL specific code
2012-02-01 Keshava MunegowdaARM: OMAP: USB: Build the USB HOST TLL omap device
2012-02-01 Keshava MunegowdaARM: OMAP: USB: HOST TLL platform driver
2012-02-01 Keshava MunegowdaMFD: OMAP: USB: Runtime PM support
2012-02-01 Keshava MunegowdaARM: OMAP: USBHOST: Replace usbhs core driver APIs...
2012-02-01 Keshava MunegowdaARM: OMAP: USB: register hwmods of usbhs
2012-02-01 R SricharanARM: mm: Increase the temporary stack size during the...
2012-01-31 Santosh ShilimkarARM: OMAP5: Fix the build error for kernel build withou...
2012-01-31 Santosh ShilimkarARM: OMAP5: Keep CONFIG_NO_HZ disabled since it causes...
2012-01-31 J KeerthyARM: OMAP5: Enable Palmas in the OMAP5 EVM Defconfig
next