pidns: add reboot_pid_ns() to handle the reboot syscall
[omap4-v4l2-camera:omap4-v4l2-camera.git] / kernel / sys.c
1 /*
2  *  linux/kernel/sys.c
3  *
4  *  Copyright (C) 1991, 1992  Linus Torvalds
5  */
6
7 #include <linux/export.h>
8 #include <linux/mm.h>
9 #include <linux/utsname.h>
10 #include <linux/mman.h>
11 #include <linux/reboot.h>
12 #include <linux/prctl.h>
13 #include <linux/highuid.h>
14 #include <linux/fs.h>
15 #include <linux/kmod.h>
16 #include <linux/perf_event.h>
17 #include <linux/resource.h>
18 #include <linux/kernel.h>
19 #include <linux/kexec.h>
20 #include <linux/workqueue.h>
21 #include <linux/capability.h>
22 #include <linux/device.h>
23 #include <linux/key.h>
24 #include <linux/times.h>
25 #include <linux/posix-timers.h>
26 #include <linux/security.h>
27 #include <linux/dcookies.h>
28 #include <linux/suspend.h>
29 #include <linux/tty.h>
30 #include <linux/signal.h>
31 #include <linux/cn_proc.h>
32 #include <linux/getcpu.h>
33 #include <linux/task_io_accounting_ops.h>
34 #include <linux/seccomp.h>
35 #include <linux/cpu.h>
36 #include <linux/personality.h>
37 #include <linux/ptrace.h>
38 #include <linux/fs_struct.h>
39 #include <linux/gfp.h>
40 #include <linux/syscore_ops.h>
41 #include <linux/version.h>
42 #include <linux/ctype.h>
43
44 #include <linux/compat.h>
45 #include <linux/syscalls.h>
46 #include <linux/kprobes.h>
47 #include <linux/user_namespace.h>
48
49 #include <linux/kmsg_dump.h>
50 /* Move somewhere else to avoid recompiling? */
51 #include <generated/utsrelease.h>
52
53 #include <asm/uaccess.h>
54 #include <asm/io.h>
55 #include <asm/unistd.h>
56
57 #ifndef SET_UNALIGN_CTL
58 # define SET_UNALIGN_CTL(a,b)   (-EINVAL)
59 #endif
60 #ifndef GET_UNALIGN_CTL
61 # define GET_UNALIGN_CTL(a,b)   (-EINVAL)
62 #endif
63 #ifndef SET_FPEMU_CTL
64 # define SET_FPEMU_CTL(a,b)     (-EINVAL)
65 #endif
66 #ifndef GET_FPEMU_CTL
67 # define GET_FPEMU_CTL(a,b)     (-EINVAL)
68 #endif
69 #ifndef SET_FPEXC_CTL
70 # define SET_FPEXC_CTL(a,b)     (-EINVAL)
71 #endif
72 #ifndef GET_FPEXC_CTL
73 # define GET_FPEXC_CTL(a,b)     (-EINVAL)
74 #endif
75 #ifndef GET_ENDIAN
76 # define GET_ENDIAN(a,b)        (-EINVAL)
77 #endif
78 #ifndef SET_ENDIAN
79 # define SET_ENDIAN(a,b)        (-EINVAL)
80 #endif
81 #ifndef GET_TSC_CTL
82 # define GET_TSC_CTL(a)         (-EINVAL)
83 #endif
84 #ifndef SET_TSC_CTL
85 # define SET_TSC_CTL(a)         (-EINVAL)
86 #endif
87
88 /*
89  * this is where the system-wide overflow UID and GID are defined, for
90  * architectures that now have 32-bit UID/GID but didn't in the past
91  */
92
93 int overflowuid = DEFAULT_OVERFLOWUID;
94 int overflowgid = DEFAULT_OVERFLOWGID;
95
96 #ifdef CONFIG_UID16
97 EXPORT_SYMBOL(overflowuid);
98 EXPORT_SYMBOL(overflowgid);
99 #endif
100
101 /*
102  * the same as above, but for filesystems which can only store a 16-bit
103  * UID and GID. as such, this is needed on all architectures
104  */
105
106 int fs_overflowuid = DEFAULT_FS_OVERFLOWUID;
107 int fs_overflowgid = DEFAULT_FS_OVERFLOWUID;
108
109 EXPORT_SYMBOL(fs_overflowuid);
110 EXPORT_SYMBOL(fs_overflowgid);
111
112 /*
113  * this indicates whether you can reboot with ctrl-alt-del: the default is yes
114  */
115
116 int C_A_D = 1;
117 struct pid *cad_pid;
118 EXPORT_SYMBOL(cad_pid);
119
120 /*
121  * If set, this is used for preparing the system to power off.
122  */
123
124 void (*pm_power_off_prepare)(void);
125
126 /*
127  * Returns true if current's euid is same as p's uid or euid,
128  * or has CAP_SYS_NICE to p's user_ns.
129  *
130  * Called with rcu_read_lock, creds are safe
131  */
132 static bool set_one_prio_perm(struct task_struct *p)
133 {
134         const struct cred *cred = current_cred(), *pcred = __task_cred(p);
135
136         if (pcred->user->user_ns == cred->user->user_ns &&
137             (pcred->uid  == cred->euid ||
138              pcred->euid == cred->euid))
139                 return true;
140         if (ns_capable(pcred->user->user_ns, CAP_SYS_NICE))
141                 return true;
142         return false;
143 }
144
145 /*
146  * set the priority of a task
147  * - the caller must hold the RCU read lock
148  */
149 static int set_one_prio(struct task_struct *p, int niceval, int error)
150 {
151         int no_nice;
152
153         if (!set_one_prio_perm(p)) {
154                 error = -EPERM;
155                 goto out;
156         }
157         if (niceval < task_nice(p) && !can_nice(p, niceval)) {
158                 error = -EACCES;
159                 goto out;
160         }
161         no_nice = security_task_setnice(p, niceval);
162         if (no_nice) {
163                 error = no_nice;
164                 goto out;
165         }
166         if (error == -ESRCH)
167                 error = 0;
168         set_user_nice(p, niceval);
169 out:
170         return error;
171 }
172
173 SYSCALL_DEFINE3(setpriority, int, which, int, who, int, niceval)
174 {
175         struct task_struct *g, *p;
176         struct user_struct *user;
177         const struct cred *cred = current_cred();
178         int error = -EINVAL;
179         struct pid *pgrp;
180
181         if (which > PRIO_USER || which < PRIO_PROCESS)
182                 goto out;
183
184         /* normalize: avoid signed division (rounding problems) */
185         error = -ESRCH;
186         if (niceval < -20)
187                 niceval = -20;
188         if (niceval > 19)
189                 niceval = 19;
190
191         rcu_read_lock();
192         read_lock(&tasklist_lock);
193         switch (which) {
194                 case PRIO_PROCESS:
195                         if (who)
196                                 p = find_task_by_vpid(who);
197                         else
198                                 p = current;
199                         if (p)
200                                 error = set_one_prio(p, niceval, error);
201                         break;
202                 case PRIO_PGRP:
203                         if (who)
204                                 pgrp = find_vpid(who);
205                         else
206                                 pgrp = task_pgrp(current);
207                         do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
208                                 error = set_one_prio(p, niceval, error);
209                         } while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
210                         break;
211                 case PRIO_USER:
212                         user = (struct user_struct *) cred->user;
213                         if (!who)
214                                 who = cred->uid;
215                         else if ((who != cred->uid) &&
216                                  !(user = find_user(who)))
217                                 goto out_unlock;        /* No processes for this user */
218
219                         do_each_thread(g, p) {
220                                 if (__task_cred(p)->uid == who)
221                                         error = set_one_prio(p, niceval, error);
222                         } while_each_thread(g, p);
223                         if (who != cred->uid)
224                                 free_uid(user);         /* For find_user() */
225                         break;
226         }
227 out_unlock:
228         read_unlock(&tasklist_lock);
229         rcu_read_unlock();
230 out:
231         return error;
232 }
233
234 /*
235  * Ugh. To avoid negative return values, "getpriority()" will
236  * not return the normal nice-value, but a negated value that
237  * has been offset by 20 (ie it returns 40..1 instead of -20..19)
238  * to stay compatible.
239  */
240 SYSCALL_DEFINE2(getpriority, int, which, int, who)
241 {
242         struct task_struct *g, *p;
243         struct user_struct *user;
244         const struct cred *cred = current_cred();
245         long niceval, retval = -ESRCH;
246         struct pid *pgrp;
247
248         if (which > PRIO_USER || which < PRIO_PROCESS)
249                 return -EINVAL;
250
251         rcu_read_lock();
252         read_lock(&tasklist_lock);
253         switch (which) {
254                 case PRIO_PROCESS:
255                         if (who)
256                                 p = find_task_by_vpid(who);
257                         else
258                                 p = current;
259                         if (p) {
260                                 niceval = 20 - task_nice(p);
261                                 if (niceval > retval)
262                                         retval = niceval;
263                         }
264                         break;
265                 case PRIO_PGRP:
266                         if (who)
267                                 pgrp = find_vpid(who);
268                         else
269                                 pgrp = task_pgrp(current);
270                         do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
271                                 niceval = 20 - task_nice(p);
272                                 if (niceval > retval)
273                                         retval = niceval;
274                         } while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
275                         break;
276                 case PRIO_USER:
277                         user = (struct user_struct *) cred->user;
278                         if (!who)
279                                 who = cred->uid;
280                         else if ((who != cred->uid) &&
281                                  !(user = find_user(who)))
282                                 goto out_unlock;        /* No processes for this user */
283
284                         do_each_thread(g, p) {
285                                 if (__task_cred(p)->uid == who) {
286                                         niceval = 20 - task_nice(p);
287                                         if (niceval > retval)
288                                                 retval = niceval;
289                                 }
290                         } while_each_thread(g, p);
291                         if (who != cred->uid)
292                                 free_uid(user);         /* for find_user() */
293                         break;
294         }
295 out_unlock:
296         read_unlock(&tasklist_lock);
297         rcu_read_unlock();
298
299         return retval;
300 }
301
302 /**
303  *      emergency_restart - reboot the system
304  *
305  *      Without shutting down any hardware or taking any locks
306  *      reboot the system.  This is called when we know we are in
307  *      trouble so this is our best effort to reboot.  This is
308  *      safe to call in interrupt context.
309  */
310 void emergency_restart(void)
311 {
312         kmsg_dump(KMSG_DUMP_EMERG);
313         machine_emergency_restart();
314 }
315 EXPORT_SYMBOL_GPL(emergency_restart);
316
317 void kernel_restart_prepare(char *cmd)
318 {
319         blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
320         system_state = SYSTEM_RESTART;
321         usermodehelper_disable();
322         device_shutdown();
323         syscore_shutdown();
324 }
325
326 /**
327  *      register_reboot_notifier - Register function to be called at reboot time
328  *      @nb: Info about notifier function to be called
329  *
330  *      Registers a function with the list of functions
331  *      to be called at reboot time.
332  *
333  *      Currently always returns zero, as blocking_notifier_chain_register()
334  *      always returns zero.
335  */
336 int register_reboot_notifier(struct notifier_block *nb)
337 {
338         return blocking_notifier_chain_register(&reboot_notifier_list, nb);
339 }
340 EXPORT_SYMBOL(register_reboot_notifier);
341
342 /**
343  *      unregister_reboot_notifier - Unregister previously registered reboot notifier
344  *      @nb: Hook to be unregistered
345  *
346  *      Unregisters a previously registered reboot
347  *      notifier function.
348  *
349  *      Returns zero on success, or %-ENOENT on failure.
350  */
351 int unregister_reboot_notifier(struct notifier_block *nb)
352 {
353         return blocking_notifier_chain_unregister(&reboot_notifier_list, nb);
354 }
355 EXPORT_SYMBOL(unregister_reboot_notifier);
356
357 /**
358  *      kernel_restart - reboot the system
359  *      @cmd: pointer to buffer containing command to execute for restart
360  *              or %NULL
361  *
362  *      Shutdown everything and perform a clean reboot.
363  *      This is not safe to call in interrupt context.
364  */
365 void kernel_restart(char *cmd)
366 {
367         kernel_restart_prepare(cmd);
368         if (!cmd)
369                 printk(KERN_EMERG "Restarting system.\n");
370         else
371                 printk(KERN_EMERG "Restarting system with command '%s'.\n", cmd);
372         kmsg_dump(KMSG_DUMP_RESTART);
373         machine_restart(cmd);
374 }
375 EXPORT_SYMBOL_GPL(kernel_restart);
376
377 static void kernel_shutdown_prepare(enum system_states state)
378 {
379         blocking_notifier_call_chain(&reboot_notifier_list,
380                 (state == SYSTEM_HALT)?SYS_HALT:SYS_POWER_OFF, NULL);
381         system_state = state;
382         usermodehelper_disable();
383         device_shutdown();
384 }
385 /**
386  *      kernel_halt - halt the system
387  *
388  *      Shutdown everything and perform a clean system halt.
389  */
390 void kernel_halt(void)
391 {
392         kernel_shutdown_prepare(SYSTEM_HALT);
393         syscore_shutdown();
394         printk(KERN_EMERG "System halted.\n");
395         kmsg_dump(KMSG_DUMP_HALT);
396         machine_halt();
397 }
398
399 EXPORT_SYMBOL_GPL(kernel_halt);
400
401 /**
402  *      kernel_power_off - power_off the system
403  *
404  *      Shutdown everything and perform a clean system power_off.
405  */
406 void kernel_power_off(void)
407 {
408         kernel_shutdown_prepare(SYSTEM_POWER_OFF);
409         if (pm_power_off_prepare)
410                 pm_power_off_prepare();
411         disable_nonboot_cpus();
412         syscore_shutdown();
413         printk(KERN_EMERG "Power down.\n");
414         kmsg_dump(KMSG_DUMP_POWEROFF);
415         machine_power_off();
416 }
417 EXPORT_SYMBOL_GPL(kernel_power_off);
418
419 static DEFINE_MUTEX(reboot_mutex);
420
421 /*
422  * Reboot system call: for obvious reasons only root may call it,
423  * and even root needs to set up some magic numbers in the registers
424  * so that some mistake won't make this reboot the whole machine.
425  * You can also set the meaning of the ctrl-alt-del-key here.
426  *
427  * reboot doesn't sync: do that yourself before calling this.
428  */
429 SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
430                 void __user *, arg)
431 {
432         char buffer[256];
433         int ret = 0;
434
435         /* We only trust the superuser with rebooting the system. */
436         if (!capable(CAP_SYS_BOOT))
437                 return -EPERM;
438
439         /* For safety, we require "magic" arguments. */
440         if (magic1 != LINUX_REBOOT_MAGIC1 ||
441             (magic2 != LINUX_REBOOT_MAGIC2 &&
442                         magic2 != LINUX_REBOOT_MAGIC2A &&
443                         magic2 != LINUX_REBOOT_MAGIC2B &&
444                         magic2 != LINUX_REBOOT_MAGIC2C))
445                 return -EINVAL;
446
447         /*
448          * If pid namespaces are enabled and the current task is in a child
449          * pid_namespace, the command is handled by reboot_pid_ns() which will
450          * call do_exit().
451          */
452         ret = reboot_pid_ns(task_active_pid_ns(current), cmd);
453         if (ret)
454                 return ret;
455
456         /* Instead of trying to make the power_off code look like
457          * halt when pm_power_off is not set do it the easy way.
458          */
459         if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
460                 cmd = LINUX_REBOOT_CMD_HALT;
461
462         mutex_lock(&reboot_mutex);
463         switch (cmd) {
464         case LINUX_REBOOT_CMD_RESTART:
465                 kernel_restart(NULL);
466                 break;
467
468         case LINUX_REBOOT_CMD_CAD_ON:
469                 C_A_D = 1;
470                 break;
471
472         case LINUX_REBOOT_CMD_CAD_OFF:
473                 C_A_D = 0;
474                 break;
475
476         case LINUX_REBOOT_CMD_HALT:
477                 kernel_halt();
478                 do_exit(0);
479                 panic("cannot halt");
480
481         case LINUX_REBOOT_CMD_POWER_OFF:
482                 kernel_power_off();
483                 do_exit(0);
484                 break;
485
486         case LINUX_REBOOT_CMD_RESTART2:
487                 if (strncpy_from_user(&buffer[0], arg, sizeof(buffer) - 1) < 0) {
488                         ret = -EFAULT;
489                         break;
490                 }
491                 buffer[sizeof(buffer) - 1] = '\0';
492
493                 kernel_restart(buffer);
494                 break;
495
496 #ifdef CONFIG_KEXEC
497         case LINUX_REBOOT_CMD_KEXEC:
498                 ret = kernel_kexec();
499                 break;
500 #endif
501
502 #ifdef CONFIG_HIBERNATION
503         case LINUX_REBOOT_CMD_SW_SUSPEND:
504                 ret = hibernate();
505                 break;
506 #endif
507
508         default:
509                 ret = -EINVAL;
510                 break;
511         }
512         mutex_unlock(&reboot_mutex);
513         return ret;
514 }
515
516 static void deferred_cad(struct work_struct *dummy)
517 {
518         kernel_restart(NULL);
519 }
520
521 /*
522  * This function gets called by ctrl-alt-del - ie the keyboard interrupt.
523  * As it's called within an interrupt, it may NOT sync: the only choice
524  * is whether to reboot at once, or just ignore the ctrl-alt-del.
525  */
526 void ctrl_alt_del(void)
527 {
528         static DECLARE_WORK(cad_work, deferred_cad);
529
530         if (C_A_D)
531                 schedule_work(&cad_work);
532         else
533                 kill_cad_pid(SIGINT, 1);
534 }
535         
536 /*
537  * Unprivileged users may change the real gid to the effective gid
538  * or vice versa.  (BSD-style)
539  *
540  * If you set the real gid at all, or set the effective gid to a value not
541  * equal to the real gid, then the saved gid is set to the new effective gid.
542  *
543  * This makes it possible for a setgid program to completely drop its
544  * privileges, which is often a useful assertion to make when you are doing
545  * a security audit over a program.
546  *
547  * The general idea is that a program which uses just setregid() will be
548  * 100% compatible with BSD.  A program which uses just setgid() will be
549  * 100% compatible with POSIX with saved IDs. 
550  *
551  * SMP: There are not races, the GIDs are checked only by filesystem
552  *      operations (as far as semantic preservation is concerned).
553  */
554 SYSCALL_DEFINE2(setregid, gid_t, rgid, gid_t, egid)
555 {
556         const struct cred *old;
557         struct cred *new;
558         int retval;
559
560         new = prepare_creds();
561         if (!new)
562                 return -ENOMEM;
563         old = current_cred();
564
565         retval = -EPERM;
566         if (rgid != (gid_t) -1) {
567                 if (old->gid == rgid ||
568                     old->egid == rgid ||
569                     nsown_capable(CAP_SETGID))
570                         new->gid = rgid;
571                 else
572                         goto error;
573         }
574         if (egid != (gid_t) -1) {
575                 if (old->gid == egid ||
576                     old->egid == egid ||
577                     old->sgid == egid ||
578                     nsown_capable(CAP_SETGID))
579                         new->egid = egid;
580                 else
581                         goto error;
582         }
583
584         if (rgid != (gid_t) -1 ||
585             (egid != (gid_t) -1 && egid != old->gid))
586                 new->sgid = new->egid;
587         new->fsgid = new->egid;
588
589         return commit_creds(new);
590
591 error:
592         abort_creds(new);
593         return retval;
594 }
595
596 /*
597  * setgid() is implemented like SysV w/ SAVED_IDS 
598  *
599  * SMP: Same implicit races as above.
600  */
601 SYSCALL_DEFINE1(setgid, gid_t, gid)
602 {
603         const struct cred *old;
604         struct cred *new;
605         int retval;
606
607         new = prepare_creds();
608         if (!new)
609                 return -ENOMEM;
610         old = current_cred();
611
612         retval = -EPERM;
613         if (nsown_capable(CAP_SETGID))
614                 new->gid = new->egid = new->sgid = new->fsgid = gid;
615         else if (gid == old->gid || gid == old->sgid)
616                 new->egid = new->fsgid = gid;
617         else
618                 goto error;
619
620         return commit_creds(new);
621
622 error:
623         abort_creds(new);
624         return retval;
625 }
626
627 /*
628  * change the user struct in a credentials set to match the new UID
629  */
630 static int set_user(struct cred *new)
631 {
632         struct user_struct *new_user;
633
634         new_user = alloc_uid(current_user_ns(), new->uid);
635         if (!new_user)
636                 return -EAGAIN;
637
638         /*
639          * We don't fail in case of NPROC limit excess here because too many
640          * poorly written programs don't check set*uid() return code, assuming
641          * it never fails if called by root.  We may still enforce NPROC limit
642          * for programs doing set*uid()+execve() by harmlessly deferring the
643          * failure to the execve() stage.
644          */
645         if (atomic_read(&new_user->processes) >= rlimit(RLIMIT_NPROC) &&
646                         new_user != INIT_USER)
647                 current->flags |= PF_NPROC_EXCEEDED;
648         else
649                 current->flags &= ~PF_NPROC_EXCEEDED;
650
651         free_uid(new->user);
652         new->user = new_user;
653         return 0;
654 }
655
656 /*
657  * Unprivileged users may change the real uid to the effective uid
658  * or vice versa.  (BSD-style)
659  *
660  * If you set the real uid at all, or set the effective uid to a value not
661  * equal to the real uid, then the saved uid is set to the new effective uid.
662  *
663  * This makes it possible for a setuid program to completely drop its
664  * privileges, which is often a useful assertion to make when you are doing
665  * a security audit over a program.
666  *
667  * The general idea is that a program which uses just setreuid() will be
668  * 100% compatible with BSD.  A program which uses just setuid() will be
669  * 100% compatible with POSIX with saved IDs. 
670  */
671 SYSCALL_DEFINE2(setreuid, uid_t, ruid, uid_t, euid)
672 {
673         const struct cred *old;
674         struct cred *new;
675         int retval;
676
677         new = prepare_creds();
678         if (!new)
679                 return -ENOMEM;
680         old = current_cred();
681
682         retval = -EPERM;
683         if (ruid != (uid_t) -1) {
684                 new->uid = ruid;
685                 if (old->uid != ruid &&
686                     old->euid != ruid &&
687                     !nsown_capable(CAP_SETUID))
688                         goto error;
689         }
690
691         if (euid != (uid_t) -1) {
692                 new->euid = euid;
693                 if (old->uid != euid &&
694                     old->euid != euid &&
695                     old->suid != euid &&
696                     !nsown_capable(CAP_SETUID))
697                         goto error;
698         }
699
700         if (new->uid != old->uid) {
701                 retval = set_user(new);
702                 if (retval < 0)
703                         goto error;
704         }
705         if (ruid != (uid_t) -1 ||
706             (euid != (uid_t) -1 && euid != old->uid))
707                 new->suid = new->euid;
708         new->fsuid = new->euid;
709
710         retval = security_task_fix_setuid(new, old, LSM_SETID_RE);
711         if (retval < 0)
712                 goto error;
713
714         return commit_creds(new);
715
716 error:
717         abort_creds(new);
718         return retval;
719 }
720                 
721 /*
722  * setuid() is implemented like SysV with SAVED_IDS 
723  * 
724  * Note that SAVED_ID's is deficient in that a setuid root program
725  * like sendmail, for example, cannot set its uid to be a normal 
726  * user and then switch back, because if you're root, setuid() sets
727  * the saved uid too.  If you don't like this, blame the bright people
728  * in the POSIX committee and/or USG.  Note that the BSD-style setreuid()
729  * will allow a root program to temporarily drop privileges and be able to
730  * regain them by swapping the real and effective uid.  
731  */
732 SYSCALL_DEFINE1(setuid, uid_t, uid)
733 {
734         const struct cred *old;
735         struct cred *new;
736         int retval;
737
738         new = prepare_creds();
739         if (!new)
740                 return -ENOMEM;
741         old = current_cred();
742
743         retval = -EPERM;
744         if (nsown_capable(CAP_SETUID)) {
745                 new->suid = new->uid = uid;
746                 if (uid != old->uid) {
747                         retval = set_user(new);
748                         if (retval < 0)
749                                 goto error;
750                 }
751         } else if (uid != old->uid && uid != new->suid) {
752                 goto error;
753         }
754
755         new->fsuid = new->euid = uid;
756
757         retval = security_task_fix_setuid(new, old, LSM_SETID_ID);
758         if (retval < 0)
759                 goto error;
760
761         return commit_creds(new);
762
763 error:
764         abort_creds(new);
765         return retval;
766 }
767
768
769 /*
770  * This function implements a generic ability to update ruid, euid,
771  * and suid.  This allows you to implement the 4.4 compatible seteuid().
772  */
773 SYSCALL_DEFINE3(setresuid, uid_t, ruid, uid_t, euid, uid_t, suid)
774 {
775         const struct cred *old;
776         struct cred *new;
777         int retval;
778
779         new = prepare_creds();
780         if (!new)
781                 return -ENOMEM;
782
783         old = current_cred();
784
785         retval = -EPERM;
786         if (!nsown_capable(CAP_SETUID)) {
787                 if (ruid != (uid_t) -1 && ruid != old->uid &&
788                     ruid != old->euid  && ruid != old->suid)
789                         goto error;
790                 if (euid != (uid_t) -1 && euid != old->uid &&
791                     euid != old->euid  && euid != old->suid)
792                         goto error;
793                 if (suid != (uid_t) -1 && suid != old->uid &&
794                     suid != old->euid  && suid != old->suid)
795                         goto error;
796         }
797
798         if (ruid != (uid_t) -1) {
799                 new->uid = ruid;
800                 if (ruid != old->uid) {
801                         retval = set_user(new);
802                         if (retval < 0)
803                                 goto error;
804                 }
805         }
806         if (euid != (uid_t) -1)
807                 new->euid = euid;
808         if (suid != (uid_t) -1)
809                 new->suid = suid;
810         new->fsuid = new->euid;
811
812         retval = security_task_fix_setuid(new, old, LSM_SETID_RES);
813         if (retval < 0)
814                 goto error;
815
816         return commit_creds(new);
817
818 error:
819         abort_creds(new);
820         return retval;
821 }
822
823 SYSCALL_DEFINE3(getresuid, uid_t __user *, ruid, uid_t __user *, euid, uid_t __user *, suid)
824 {
825         const struct cred *cred = current_cred();
826         int retval;
827
828         if (!(retval   = put_user(cred->uid,  ruid)) &&
829             !(retval   = put_user(cred->euid, euid)))
830                 retval = put_user(cred->suid, suid);
831
832         return retval;
833 }
834
835 /*
836  * Same as above, but for rgid, egid, sgid.
837  */
838 SYSCALL_DEFINE3(setresgid, gid_t, rgid, gid_t, egid, gid_t, sgid)
839 {
840         const struct cred *old;
841         struct cred *new;
842         int retval;
843
844         new = prepare_creds();
845         if (!new)
846                 return -ENOMEM;
847         old = current_cred();
848
849         retval = -EPERM;
850         if (!nsown_capable(CAP_SETGID)) {
851                 if (rgid != (gid_t) -1 && rgid != old->gid &&
852                     rgid != old->egid  && rgid != old->sgid)
853                         goto error;
854                 if (egid != (gid_t) -1 && egid != old->gid &&
855                     egid != old->egid  && egid != old->sgid)
856                         goto error;
857                 if (sgid != (gid_t) -1 && sgid != old->gid &&
858                     sgid != old->egid  && sgid != old->sgid)
859                         goto error;
860         }
861
862         if (rgid != (gid_t) -1)
863                 new->gid = rgid;
864         if (egid != (gid_t) -1)
865                 new->egid = egid;
866         if (sgid != (gid_t) -1)
867                 new->sgid = sgid;
868         new->fsgid = new->egid;
869
870         return commit_creds(new);
871
872 error:
873         abort_creds(new);
874         return retval;
875 }
876
877 SYSCALL_DEFINE3(getresgid, gid_t __user *, rgid, gid_t __user *, egid, gid_t __user *, sgid)
878 {
879         const struct cred *cred = current_cred();
880         int retval;
881
882         if (!(retval   = put_user(cred->gid,  rgid)) &&
883             !(retval   = put_user(cred->egid, egid)))
884                 retval = put_user(cred->sgid, sgid);
885
886         return retval;
887 }
888
889
890 /*
891  * "setfsuid()" sets the fsuid - the uid used for filesystem checks. This
892  * is used for "access()" and for the NFS daemon (letting nfsd stay at
893  * whatever uid it wants to). It normally shadows "euid", except when
894  * explicitly set by setfsuid() or for access..
895  */
896 SYSCALL_DEFINE1(setfsuid, uid_t, uid)
897 {
898         const struct cred *old;
899         struct cred *new;
900         uid_t old_fsuid;
901
902         new = prepare_creds();
903         if (!new)
904                 return current_fsuid();
905         old = current_cred();
906         old_fsuid = old->fsuid;
907
908         if (uid == old->uid  || uid == old->euid  ||
909             uid == old->suid || uid == old->fsuid ||
910             nsown_capable(CAP_SETUID)) {
911                 if (uid != old_fsuid) {
912                         new->fsuid = uid;
913                         if (security_task_fix_setuid(new, old, LSM_SETID_FS) == 0)
914                                 goto change_okay;
915                 }
916         }
917
918         abort_creds(new);
919         return old_fsuid;
920
921 change_okay:
922         commit_creds(new);
923         return old_fsuid;
924 }
925
926 /*
927  * Samma på svenska..
928  */
929 SYSCALL_DEFINE1(setfsgid, gid_t, gid)
930 {
931         const struct cred *old;
932         struct cred *new;
933         gid_t old_fsgid;
934
935         new = prepare_creds();
936         if (!new)
937                 return current_fsgid();
938         old = current_cred();
939         old_fsgid = old->fsgid;
940
941         if (gid == old->gid  || gid == old->egid  ||
942             gid == old->sgid || gid == old->fsgid ||
943             nsown_capable(CAP_SETGID)) {
944                 if (gid != old_fsgid) {
945                         new->fsgid = gid;
946                         goto change_okay;
947                 }
948         }
949
950         abort_creds(new);
951         return old_fsgid;
952
953 change_okay:
954         commit_creds(new);
955         return old_fsgid;
956 }
957
958 void do_sys_times(struct tms *tms)
959 {
960         cputime_t tgutime, tgstime, cutime, cstime;
961
962         spin_lock_irq(&current->sighand->siglock);
963         thread_group_times(current, &tgutime, &tgstime);
964         cutime = current->signal->cutime;
965         cstime = current->signal->cstime;
966         spin_unlock_irq(&current->sighand->siglock);
967         tms->tms_utime = cputime_to_clock_t(tgutime);
968         tms->tms_stime = cputime_to_clock_t(tgstime);
969         tms->tms_cutime = cputime_to_clock_t(cutime);
970         tms->tms_cstime = cputime_to_clock_t(cstime);
971 }
972
973 SYSCALL_DEFINE1(times, struct tms __user *, tbuf)
974 {
975         if (tbuf) {
976                 struct tms tmp;
977
978                 do_sys_times(&tmp);
979                 if (copy_to_user(tbuf, &tmp, sizeof(struct tms)))
980                         return -EFAULT;
981         }
982         force_successful_syscall_return();
983         return (long) jiffies_64_to_clock_t(get_jiffies_64());
984 }
985
986 /*
987  * This needs some heavy checking ...
988  * I just haven't the stomach for it. I also don't fully
989  * understand sessions/pgrp etc. Let somebody who does explain it.
990  *
991  * OK, I think I have the protection semantics right.... this is really
992  * only important on a multi-user system anyway, to make sure one user
993  * can't send a signal to a process owned by another.  -TYT, 12/12/91
994  *
995  * Auch. Had to add the 'did_exec' flag to conform completely to POSIX.
996  * LBT 04.03.94
997  */
998 SYSCALL_DEFINE2(setpgid, pid_t, pid, pid_t, pgid)
999 {
1000         struct task_struct *p;
1001         struct task_struct *group_leader = current->group_leader;
1002         struct pid *pgrp;
1003         int err;
1004
1005         if (!pid)
1006                 pid = task_pid_vnr(group_leader);
1007         if (!pgid)
1008                 pgid = pid;
1009         if (pgid < 0)
1010                 return -EINVAL;
1011         rcu_read_lock();
1012
1013         /* From this point forward we keep holding onto the tasklist lock
1014          * so that our parent does not change from under us. -DaveM
1015          */
1016         write_lock_irq(&tasklist_lock);
1017
1018         err = -ESRCH;
1019         p = find_task_by_vpid(pid);
1020         if (!p)
1021                 goto out;
1022
1023         err = -EINVAL;
1024         if (!thread_group_leader(p))
1025                 goto out;
1026
1027         if (same_thread_group(p->real_parent, group_leader)) {
1028                 err = -EPERM;
1029                 if (task_session(p) != task_session(group_leader))
1030                         goto out;
1031                 err = -EACCES;
1032                 if (p->did_exec)
1033                         goto out;
1034         } else {
1035                 err = -ESRCH;
1036                 if (p != group_leader)
1037                         goto out;
1038         }
1039
1040         err = -EPERM;
1041         if (p->signal->leader)
1042                 goto out;
1043
1044         pgrp = task_pid(p);
1045         if (pgid != pid) {
1046                 struct task_struct *g;
1047
1048                 pgrp = find_vpid(pgid);
1049                 g = pid_task(pgrp, PIDTYPE_PGID);
1050                 if (!g || task_session(g) != task_session(group_leader))
1051                         goto out;
1052         }
1053
1054         err = security_task_setpgid(p, pgid);
1055         if (err)
1056                 goto out;
1057
1058         if (task_pgrp(p) != pgrp)
1059                 change_pid(p, PIDTYPE_PGID, pgrp);
1060
1061         err = 0;
1062 out:
1063         /* All paths lead to here, thus we are safe. -DaveM */
1064         write_unlock_irq(&tasklist_lock);
1065         rcu_read_unlock();
1066         return err;
1067 }
1068
1069 SYSCALL_DEFINE1(getpgid, pid_t, pid)
1070 {
1071         struct task_struct *p;
1072         struct pid *grp;
1073         int retval;
1074
1075         rcu_read_lock();
1076         if (!pid)
1077                 grp = task_pgrp(current);
1078         else {
1079                 retval = -ESRCH;
1080                 p = find_task_by_vpid(pid);
1081                 if (!p)
1082                         goto out;
1083                 grp = task_pgrp(p);
1084                 if (!grp)
1085                         goto out;
1086
1087                 retval = security_task_getpgid(p);
1088                 if (retval)
1089                         goto out;
1090         }
1091         retval = pid_vnr(grp);
1092 out:
1093         rcu_read_unlock();
1094         return retval;
1095 }
1096
1097 #ifdef __ARCH_WANT_SYS_GETPGRP
1098
1099 SYSCALL_DEFINE0(getpgrp)
1100 {
1101         return sys_getpgid(0);
1102 }
1103
1104 #endif
1105
1106 SYSCALL_DEFINE1(getsid, pid_t, pid)
1107 {
1108         struct task_struct *p;
1109         struct pid *sid;
1110         int retval;
1111
1112         rcu_read_lock();
1113         if (!pid)
1114                 sid = task_session(current);
1115         else {
1116                 retval = -ESRCH;
1117                 p = find_task_by_vpid(pid);
1118                 if (!p)
1119                         goto out;
1120                 sid = task_session(p);
1121                 if (!sid)
1122                         goto out;
1123
1124                 retval = security_task_getsid(p);
1125                 if (retval)
1126                         goto out;
1127         }
1128         retval = pid_vnr(sid);
1129 out:
1130         rcu_read_unlock();
1131         return retval;
1132 }
1133
1134 SYSCALL_DEFINE0(setsid)
1135 {
1136         struct task_struct *group_leader = current->group_leader;
1137         struct pid *sid = task_pid(group_leader);
1138         pid_t session = pid_vnr(sid);
1139         int err = -EPERM;
1140
1141         write_lock_irq(&tasklist_lock);
1142         /* Fail if I am already a session leader */
1143         if (group_leader->signal->leader)
1144                 goto out;
1145
1146         /* Fail if a process group id already exists that equals the
1147          * proposed session id.
1148          */
1149         if (pid_task(sid, PIDTYPE_PGID))
1150                 goto out;
1151
1152         group_leader->signal->leader = 1;
1153         __set_special_pids(sid);
1154
1155         proc_clear_tty(group_leader);
1156
1157         err = session;
1158 out:
1159         write_unlock_irq(&tasklist_lock);
1160         if (err > 0) {
1161                 proc_sid_connector(group_leader);
1162                 sched_autogroup_create_attach(group_leader);
1163         }
1164         return err;
1165 }
1166
1167 DECLARE_RWSEM(uts_sem);
1168
1169 #ifdef COMPAT_UTS_MACHINE
1170 #define override_architecture(name) \
1171         (personality(current->personality) == PER_LINUX32 && \
1172          copy_to_user(name->machine, COMPAT_UTS_MACHINE, \
1173                       sizeof(COMPAT_UTS_MACHINE)))
1174 #else
1175 #define override_architecture(name)     0
1176 #endif
1177
1178 /*
1179  * Work around broken programs that cannot handle "Linux 3.0".
1180  * Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40
1181  */
1182 static int override_release(char __user *release, int len)
1183 {
1184         int ret = 0;
1185         char buf[65];
1186
1187         if (current->personality & UNAME26) {
1188                 char *rest = UTS_RELEASE;
1189                 int ndots = 0;
1190                 unsigned v;
1191
1192                 while (*rest) {
1193                         if (*rest == '.' && ++ndots >= 3)
1194                                 break;
1195                         if (!isdigit(*rest) && *rest != '.')
1196                                 break;
1197                         rest++;
1198                 }
1199                 v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 40;
1200                 snprintf(buf, len, "2.6.%u%s", v, rest);
1201                 ret = copy_to_user(release, buf, len);
1202         }
1203         return ret;
1204 }
1205
1206 SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
1207 {
1208         int errno = 0;
1209
1210         down_read(&uts_sem);
1211         if (copy_to_user(name, utsname(), sizeof *name))
1212                 errno = -EFAULT;
1213         up_read(&uts_sem);
1214
1215         if (!errno && override_release(name->release, sizeof(name->release)))
1216                 errno = -EFAULT;
1217         if (!errno && override_architecture(name))
1218                 errno = -EFAULT;
1219         return errno;
1220 }
1221
1222 #ifdef __ARCH_WANT_SYS_OLD_UNAME
1223 /*
1224  * Old cruft
1225  */
1226 SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
1227 {
1228         int error = 0;
1229
1230         if (!name)
1231                 return -EFAULT;
1232
1233         down_read(&uts_sem);
1234         if (copy_to_user(name, utsname(), sizeof(*name)))
1235                 error = -EFAULT;
1236         up_read(&uts_sem);
1237
1238         if (!error && override_release(name->release, sizeof(name->release)))
1239                 error = -EFAULT;
1240         if (!error && override_architecture(name))
1241                 error = -EFAULT;
1242         return error;
1243 }
1244
1245 SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
1246 {
1247         int error;
1248
1249         if (!name)
1250                 return -EFAULT;
1251         if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
1252                 return -EFAULT;
1253
1254         down_read(&uts_sem);
1255         error = __copy_to_user(&name->sysname, &utsname()->sysname,
1256                                __OLD_UTS_LEN);
1257         error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
1258         error |= __copy_to_user(&name->nodename, &utsname()->nodename,
1259                                 __OLD_UTS_LEN);
1260         error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
1261         error |= __copy_to_user(&name->release, &utsname()->release,
1262                                 __OLD_UTS_LEN);
1263         error |= __put_user(0, name->release + __OLD_UTS_LEN);
1264         error |= __copy_to_user(&name->version, &utsname()->version,
1265                                 __OLD_UTS_LEN);
1266         error |= __put_user(0, name->version + __OLD_UTS_LEN);
1267         error |= __copy_to_user(&name->machine, &utsname()->machine,
1268                                 __OLD_UTS_LEN);
1269         error |= __put_user(0, name->machine + __OLD_UTS_LEN);
1270         up_read(&uts_sem);
1271
1272         if (!error && override_architecture(name))
1273                 error = -EFAULT;
1274         if (!error && override_release(name->release, sizeof(name->release)))
1275                 error = -EFAULT;
1276         return error ? -EFAULT : 0;
1277 }
1278 #endif
1279
1280 SYSCALL_DEFINE2(sethostname, char __user *, name, int, len)
1281 {
1282         int errno;
1283         char tmp[__NEW_UTS_LEN];
1284
1285         if (!ns_capable(current->nsproxy->uts_ns->user_ns, CAP_SYS_ADMIN))
1286                 return -EPERM;
1287
1288         if (len < 0 || len > __NEW_UTS_LEN)
1289                 return -EINVAL;
1290         down_write(&uts_sem);
1291         errno = -EFAULT;
1292         if (!copy_from_user(tmp, name, len)) {
1293                 struct new_utsname *u = utsname();
1294
1295                 memcpy(u->nodename, tmp, len);
1296                 memset(u->nodename + len, 0, sizeof(u->nodename) - len);
1297                 errno = 0;
1298         }
1299         uts_proc_notify(UTS_PROC_HOSTNAME);
1300         up_write(&uts_sem);
1301         return errno;
1302 }
1303
1304 #ifdef __ARCH_WANT_SYS_GETHOSTNAME
1305
1306 SYSCALL_DEFINE2(gethostname, char __user *, name, int, len)
1307 {
1308         int i, errno;
1309         struct new_utsname *u;
1310
1311         if (len < 0)
1312                 return -EINVAL;
1313         down_read(&uts_sem);
1314         u = utsname();
1315         i = 1 + strlen(u->nodename);
1316         if (i > len)
1317                 i = len;
1318         errno = 0;
1319         if (copy_to_user(name, u->nodename, i))
1320                 errno = -EFAULT;
1321         up_read(&uts_sem);
1322         return errno;
1323 }
1324
1325 #endif
1326
1327 /*
1328  * Only setdomainname; getdomainname can be implemented by calling
1329  * uname()
1330  */
1331 SYSCALL_DEFINE2(setdomainname, char __user *, name, int, len)
1332 {
1333         int errno;
1334         char tmp[__NEW_UTS_LEN];
1335
1336         if (!ns_capable(current->nsproxy->uts_ns->user_ns, CAP_SYS_ADMIN))
1337                 return -EPERM;
1338         if (len < 0 || len > __NEW_UTS_LEN)
1339                 return -EINVAL;
1340
1341         down_write(&uts_sem);
1342         errno = -EFAULT;
1343         if (!copy_from_user(tmp, name, len)) {
1344                 struct new_utsname *u = utsname();
1345
1346                 memcpy(u->domainname, tmp, len);
1347                 memset(u->domainname + len, 0, sizeof(u->domainname) - len);
1348                 errno = 0;
1349         }
1350         uts_proc_notify(UTS_PROC_DOMAINNAME);
1351         up_write(&uts_sem);
1352         return errno;
1353 }
1354
1355 SYSCALL_DEFINE2(getrlimit, unsigned int, resource, struct rlimit __user *, rlim)
1356 {
1357         struct rlimit value;
1358         int ret;
1359
1360         ret = do_prlimit(current, resource, NULL, &value);
1361         if (!ret)
1362                 ret = copy_to_user(rlim, &value, sizeof(*rlim)) ? -EFAULT : 0;
1363
1364         return ret;
1365 }
1366
1367 #ifdef __ARCH_WANT_SYS_OLD_GETRLIMIT
1368
1369 /*
1370  *      Back compatibility for getrlimit. Needed for some apps.
1371  */
1372  
1373 SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
1374                 struct rlimit __user *, rlim)
1375 {
1376         struct rlimit x;
1377         if (resource >= RLIM_NLIMITS)
1378                 return -EINVAL;
1379
1380         task_lock(current->group_leader);
1381         x = current->signal->rlim[resource];
1382         task_unlock(current->group_leader);
1383         if (x.rlim_cur > 0x7FFFFFFF)
1384                 x.rlim_cur = 0x7FFFFFFF;
1385         if (x.rlim_max > 0x7FFFFFFF)
1386                 x.rlim_max = 0x7FFFFFFF;
1387         return copy_to_user(rlim, &x, sizeof(x))?-EFAULT:0;
1388 }
1389
1390 #endif
1391
1392 static inline bool rlim64_is_infinity(__u64 rlim64)
1393 {
1394 #if BITS_PER_LONG < 64
1395         return rlim64 >= ULONG_MAX;
1396 #else
1397         return rlim64 == RLIM64_INFINITY;
1398 #endif
1399 }
1400
1401 static void rlim_to_rlim64(const struct rlimit *rlim, struct rlimit64 *rlim64)
1402 {
1403         if (rlim->rlim_cur == RLIM_INFINITY)
1404                 rlim64->rlim_cur = RLIM64_INFINITY;
1405         else
1406                 rlim64->rlim_cur = rlim->rlim_cur;
1407         if (rlim->rlim_max == RLIM_INFINITY)
1408                 rlim64->rlim_max = RLIM64_INFINITY;
1409         else
1410                 rlim64->rlim_max = rlim->rlim_max;
1411 }
1412
1413 static void rlim64_to_rlim(const struct rlimit64 *rlim64, struct rlimit *rlim)
1414 {
1415         if (rlim64_is_infinity(rlim64->rlim_cur))
1416                 rlim->rlim_cur = RLIM_INFINITY;
1417         else
1418                 rlim->rlim_cur = (unsigned long)rlim64->rlim_cur;
1419         if (rlim64_is_infinity(rlim64->rlim_max))
1420                 rlim->rlim_max = RLIM_INFINITY;
1421         else
1422                 rlim->rlim_max = (unsigned long)rlim64->rlim_max;
1423 }
1424
1425 /* make sure you are allowed to change @tsk limits before calling this */
1426 int do_prlimit(struct task_struct *tsk, unsigned int resource,
1427                 struct rlimit *new_rlim, struct rlimit *old_rlim)
1428 {
1429         struct rlimit *rlim;
1430         int retval = 0;
1431
1432         if (resource >= RLIM_NLIMITS)
1433                 return -EINVAL;
1434         if (new_rlim) {
1435                 if (new_rlim->rlim_cur > new_rlim->rlim_max)
1436                         return -EINVAL;
1437                 if (resource == RLIMIT_NOFILE &&
1438                                 new_rlim->rlim_max > sysctl_nr_open)
1439                         return -EPERM;
1440         }
1441
1442         /* protect tsk->signal and tsk->sighand from disappearing */
1443         read_lock(&tasklist_lock);
1444         if (!tsk->sighand) {
1445                 retval = -ESRCH;
1446                 goto out;
1447         }
1448
1449         rlim = tsk->signal->rlim + resource;
1450         task_lock(tsk->group_leader);
1451         if (new_rlim) {
1452                 /* Keep the capable check against init_user_ns until
1453                    cgroups can contain all limits */
1454                 if (new_rlim->rlim_max > rlim->rlim_max &&
1455                                 !capable(CAP_SYS_RESOURCE))
1456                         retval = -EPERM;
1457                 if (!retval)
1458                         retval = security_task_setrlimit(tsk->group_leader,
1459                                         resource, new_rlim);
1460                 if (resource == RLIMIT_CPU && new_rlim->rlim_cur == 0) {
1461                         /*
1462                          * The caller is asking for an immediate RLIMIT_CPU
1463                          * expiry.  But we use the zero value to mean "it was
1464                          * never set".  So let's cheat and make it one second
1465                          * instead
1466                          */
1467                         new_rlim->rlim_cur = 1;
1468                 }
1469         }
1470         if (!retval) {
1471                 if (old_rlim)
1472                         *old_rlim = *rlim;
1473                 if (new_rlim)
1474                         *rlim = *new_rlim;
1475         }
1476         task_unlock(tsk->group_leader);
1477
1478         /*
1479          * RLIMIT_CPU handling.   Note that the kernel fails to return an error
1480          * code if it rejected the user's attempt to set RLIMIT_CPU.  This is a
1481          * very long-standing error, and fixing it now risks breakage of
1482          * applications, so we live with it
1483          */
1484          if (!retval && new_rlim && resource == RLIMIT_CPU &&
1485                          new_rlim->rlim_cur != RLIM_INFINITY)
1486                 update_rlimit_cpu(tsk, new_rlim->rlim_cur);
1487 out:
1488         read_unlock(&tasklist_lock);
1489         return retval;
1490 }
1491
1492 /* rcu lock must be held */
1493 static int check_prlimit_permission(struct task_struct *task)
1494 {
1495         const struct cred *cred = current_cred(), *tcred;
1496
1497         if (current == task)
1498                 return 0;
1499
1500         tcred = __task_cred(task);
1501         if (cred->user->user_ns == tcred->user->user_ns &&
1502             (cred->uid == tcred->euid &&
1503              cred->uid == tcred->suid &&
1504              cred->uid == tcred->uid  &&
1505              cred->gid == tcred->egid &&
1506              cred->gid == tcred->sgid &&
1507              cred->gid == tcred->gid))
1508                 return 0;
1509         if (ns_capable(tcred->user->user_ns, CAP_SYS_RESOURCE))
1510                 return 0;
1511
1512         return -EPERM;
1513 }
1514
1515 SYSCALL_DEFINE4(prlimit64, pid_t, pid, unsigned int, resource,
1516                 const struct rlimit64 __user *, new_rlim,
1517                 struct rlimit64 __user *, old_rlim)
1518 {
1519         struct rlimit64 old64, new64;
1520         struct rlimit old, new;
1521         struct task_struct *tsk;
1522         int ret;
1523
1524         if (new_rlim) {
1525                 if (copy_from_user(&new64, new_rlim, sizeof(new64)))
1526                         return -EFAULT;
1527                 rlim64_to_rlim(&new64, &new);
1528         }
1529
1530         rcu_read_lock();
1531         tsk = pid ? find_task_by_vpid(pid) : current;
1532         if (!tsk) {
1533                 rcu_read_unlock();
1534                 return -ESRCH;
1535         }
1536         ret = check_prlimit_permission(tsk);
1537         if (ret) {
1538                 rcu_read_unlock();
1539                 return ret;
1540         }
1541         get_task_struct(tsk);
1542         rcu_read_unlock();
1543
1544         ret = do_prlimit(tsk, resource, new_rlim ? &new : NULL,
1545                         old_rlim ? &old : NULL);
1546
1547         if (!ret && old_rlim) {
1548                 rlim_to_rlim64(&old, &old64);
1549                 if (copy_to_user(old_rlim, &old64, sizeof(old64)))
1550                         ret = -EFAULT;
1551         }
1552
1553         put_task_struct(tsk);
1554         return ret;
1555 }
1556
1557 SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
1558 {
1559         struct rlimit new_rlim;
1560
1561         if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
1562                 return -EFAULT;
1563         return do_prlimit(current, resource, &new_rlim, NULL);
1564 }
1565
1566 /*
1567  * It would make sense to put struct rusage in the task_struct,
1568  * except that would make the task_struct be *really big*.  After
1569  * task_struct gets moved into malloc'ed memory, it would
1570  * make sense to do this.  It will make moving the rest of the information
1571  * a lot simpler!  (Which we're not doing right now because we're not
1572  * measuring them yet).
1573  *
1574  * When sampling multiple threads for RUSAGE_SELF, under SMP we might have
1575  * races with threads incrementing their own counters.  But since word
1576  * reads are atomic, we either get new values or old values and we don't
1577  * care which for the sums.  We always take the siglock to protect reading
1578  * the c* fields from p->signal from races with exit.c updating those
1579  * fields when reaping, so a sample either gets all the additions of a
1580  * given child after it's reaped, or none so this sample is before reaping.
1581  *
1582  * Locking:
1583  * We need to take the siglock for CHILDEREN, SELF and BOTH
1584  * for  the cases current multithreaded, non-current single threaded
1585  * non-current multithreaded.  Thread traversal is now safe with
1586  * the siglock held.
1587  * Strictly speaking, we donot need to take the siglock if we are current and
1588  * single threaded,  as no one else can take our signal_struct away, no one
1589  * else can  reap the  children to update signal->c* counters, and no one else
1590  * can race with the signal-> fields. If we do not take any lock, the
1591  * signal-> fields could be read out of order while another thread was just
1592  * exiting. So we should  place a read memory barrier when we avoid the lock.
1593  * On the writer side,  write memory barrier is implied in  __exit_signal
1594  * as __exit_signal releases  the siglock spinlock after updating the signal->
1595  * fields. But we don't do this yet to keep things simple.
1596  *
1597  */
1598
1599 static void accumulate_thread_rusage(struct task_struct *t, struct rusage *r)
1600 {
1601         r->ru_nvcsw += t->nvcsw;
1602         r->ru_nivcsw += t->nivcsw;
1603         r->ru_minflt += t->min_flt;
1604         r->ru_majflt += t->maj_flt;
1605         r->ru_inblock += task_io_get_inblock(t);
1606         r->ru_oublock += task_io_get_oublock(t);
1607 }
1608
1609 static void k_getrusage(struct task_struct *p, int who, struct rusage *r)
1610 {
1611         struct task_struct *t;
1612         unsigned long flags;
1613         cputime_t tgutime, tgstime, utime, stime;
1614         unsigned long maxrss = 0;
1615
1616         memset((char *) r, 0, sizeof *r);
1617         utime = stime = 0;
1618
1619         if (who == RUSAGE_THREAD) {
1620                 task_times(current, &utime, &stime);
1621                 accumulate_thread_rusage(p, r);
1622                 maxrss = p->signal->maxrss;
1623                 goto out;
1624         }
1625
1626         if (!lock_task_sighand(p, &flags))
1627                 return;
1628
1629         switch (who) {
1630                 case RUSAGE_BOTH:
1631                 case RUSAGE_CHILDREN:
1632                         utime = p->signal->cutime;
1633                         stime = p->signal->cstime;
1634                         r->ru_nvcsw = p->signal->cnvcsw;
1635                         r->ru_nivcsw = p->signal->cnivcsw;
1636                         r->ru_minflt = p->signal->cmin_flt;
1637                         r->ru_majflt = p->signal->cmaj_flt;
1638                         r->ru_inblock = p->signal->cinblock;
1639                         r->ru_oublock = p->signal->coublock;
1640                         maxrss = p->signal->cmaxrss;
1641
1642                         if (who == RUSAGE_CHILDREN)
1643                                 break;
1644
1645                 case RUSAGE_SELF:
1646                         thread_group_times(p, &tgutime, &tgstime);
1647                         utime += tgutime;
1648                         stime += tgstime;
1649                         r->ru_nvcsw += p->signal->nvcsw;
1650                         r->ru_nivcsw += p->signal->nivcsw;
1651                         r->ru_minflt += p->signal->min_flt;
1652                         r->ru_majflt += p->signal->maj_flt;
1653                         r->ru_inblock += p->signal->inblock;
1654                         r->ru_oublock += p->signal->oublock;
1655                         if (maxrss < p->signal->maxrss)
1656                                 maxrss = p->signal->maxrss;
1657                         t = p;
1658                         do {
1659                                 accumulate_thread_rusage(t, r);
1660                                 t = next_thread(t);
1661                         } while (t != p);
1662                         break;
1663
1664                 default:
1665                         BUG();
1666         }
1667         unlock_task_sighand(p, &flags);
1668
1669 out:
1670         cputime_to_timeval(utime, &r->ru_utime);
1671         cputime_to_timeval(stime, &r->ru_stime);
1672
1673         if (who != RUSAGE_CHILDREN) {
1674                 struct mm_struct *mm = get_task_mm(p);
1675                 if (mm) {
1676                         setmax_mm_hiwater_rss(&maxrss, mm);
1677                         mmput(mm);
1678                 }
1679         }
1680         r->ru_maxrss = maxrss * (PAGE_SIZE / 1024); /* convert pages to KBs */
1681 }
1682
1683 int getrusage(struct task_struct *p, int who, struct rusage __user *ru)
1684 {
1685         struct rusage r;
1686         k_getrusage(p, who, &r);
1687         return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
1688 }
1689
1690 SYSCALL_DEFINE2(getrusage, int, who, struct rusage __user *, ru)
1691 {
1692         if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN &&
1693             who != RUSAGE_THREAD)
1694                 return -EINVAL;
1695         return getrusage(current, who, ru);
1696 }
1697
1698 SYSCALL_DEFINE1(umask, int, mask)
1699 {
1700         mask = xchg(&current->fs->umask, mask & S_IRWXUGO);
1701         return mask;
1702 }
1703
1704 #ifdef CONFIG_CHECKPOINT_RESTORE
1705 static int prctl_set_mm(int opt, unsigned long addr,
1706                         unsigned long arg4, unsigned long arg5)
1707 {
1708         unsigned long rlim = rlimit(RLIMIT_DATA);
1709         unsigned long vm_req_flags;
1710         unsigned long vm_bad_flags;
1711         struct vm_area_struct *vma;
1712         int error = 0;
1713         struct mm_struct *mm = current->mm;
1714
1715         if (arg4 | arg5)
1716                 return -EINVAL;
1717
1718         if (!capable(CAP_SYS_RESOURCE))
1719                 return -EPERM;
1720
1721         if (addr >= TASK_SIZE)
1722                 return -EINVAL;
1723
1724         down_read(&mm->mmap_sem);
1725         vma = find_vma(mm, addr);
1726
1727         if (opt != PR_SET_MM_START_BRK && opt != PR_SET_MM_BRK) {
1728                 /* It must be existing VMA */
1729                 if (!vma || vma->vm_start > addr)
1730                         goto out;
1731         }
1732
1733         error = -EINVAL;
1734         switch (opt) {
1735         case PR_SET_MM_START_CODE:
1736         case PR_SET_MM_END_CODE:
1737                 vm_req_flags = VM_READ | VM_EXEC;
1738                 vm_bad_flags = VM_WRITE | VM_MAYSHARE;
1739
1740                 if ((vma->vm_flags & vm_req_flags) != vm_req_flags ||
1741                     (vma->vm_flags & vm_bad_flags))
1742                         goto out;
1743
1744                 if (opt == PR_SET_MM_START_CODE)
1745                         mm->start_code = addr;
1746                 else
1747                         mm->end_code = addr;
1748                 break;
1749
1750         case PR_SET_MM_START_DATA:
1751         case PR_SET_MM_END_DATA:
1752                 vm_req_flags = VM_READ | VM_WRITE;
1753                 vm_bad_flags = VM_EXEC | VM_MAYSHARE;
1754
1755                 if ((vma->vm_flags & vm_req_flags) != vm_req_flags ||
1756                     (vma->vm_flags & vm_bad_flags))
1757                         goto out;
1758
1759                 if (opt == PR_SET_MM_START_DATA)
1760                         mm->start_data = addr;
1761                 else
1762                         mm->end_data = addr;
1763                 break;
1764
1765         case PR_SET_MM_START_STACK:
1766
1767 #ifdef CONFIG_STACK_GROWSUP
1768                 vm_req_flags = VM_READ | VM_WRITE | VM_GROWSUP;
1769 #else
1770                 vm_req_flags = VM_READ | VM_WRITE | VM_GROWSDOWN;
1771 #endif
1772                 if ((vma->vm_flags & vm_req_flags) != vm_req_flags)
1773                         goto out;
1774
1775                 mm->start_stack = addr;
1776                 break;
1777
1778         case PR_SET_MM_START_BRK:
1779                 if (addr <= mm->end_data)
1780                         goto out;
1781
1782                 if (rlim < RLIM_INFINITY &&
1783                     (mm->brk - addr) +
1784                     (mm->end_data - mm->start_data) > rlim)
1785                         goto out;
1786
1787                 mm->start_brk = addr;
1788                 break;
1789
1790         case PR_SET_MM_BRK:
1791                 if (addr <= mm->end_data)
1792                         goto out;
1793
1794                 if (rlim < RLIM_INFINITY &&
1795                     (addr - mm->start_brk) +
1796                     (mm->end_data - mm->start_data) > rlim)
1797                         goto out;
1798
1799                 mm->brk = addr;
1800                 break;
1801
1802         default:
1803                 error = -EINVAL;
1804                 goto out;
1805         }
1806
1807         error = 0;
1808
1809 out:
1810         up_read(&mm->mmap_sem);
1811
1812         return error;
1813 }
1814 #else /* CONFIG_CHECKPOINT_RESTORE */
1815 static int prctl_set_mm(int opt, unsigned long addr,
1816                         unsigned long arg4, unsigned long arg5)
1817 {
1818         return -EINVAL;
1819 }
1820 #endif
1821
1822 SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
1823                 unsigned long, arg4, unsigned long, arg5)
1824 {
1825         struct task_struct *me = current;
1826         unsigned char comm[sizeof(me->comm)];
1827         long error;
1828
1829         error = security_task_prctl(option, arg2, arg3, arg4, arg5);
1830         if (error != -ENOSYS)
1831                 return error;
1832
1833         error = 0;
1834         switch (option) {
1835                 case PR_SET_PDEATHSIG:
1836                         if (!valid_signal(arg2)) {
1837                                 error = -EINVAL;
1838                                 break;
1839                         }
1840                         me->pdeath_signal = arg2;
1841                         error = 0;
1842                         break;
1843                 case PR_GET_PDEATHSIG:
1844                         error = put_user(me->pdeath_signal, (int __user *)arg2);
1845                         break;
1846                 case PR_GET_DUMPABLE:
1847                         error = get_dumpable(me->mm);
1848                         break;
1849                 case PR_SET_DUMPABLE:
1850                         if (arg2 < 0 || arg2 > 1) {
1851                                 error = -EINVAL;
1852                                 break;
1853                         }
1854                         set_dumpable(me->mm, arg2);
1855                         error = 0;
1856                         break;
1857
1858                 case PR_SET_UNALIGN:
1859                         error = SET_UNALIGN_CTL(me, arg2);
1860                         break;
1861                 case PR_GET_UNALIGN:
1862                         error = GET_UNALIGN_CTL(me, arg2);
1863                         break;
1864                 case PR_SET_FPEMU:
1865                         error = SET_FPEMU_CTL(me, arg2);
1866                         break;
1867                 case PR_GET_FPEMU:
1868                         error = GET_FPEMU_CTL(me, arg2);
1869                         break;
1870                 case PR_SET_FPEXC:
1871                         error = SET_FPEXC_CTL(me, arg2);
1872                         break;
1873                 case PR_GET_FPEXC:
1874                         error = GET_FPEXC_CTL(me, arg2);
1875                         break;
1876                 case PR_GET_TIMING:
1877                         error = PR_TIMING_STATISTICAL;
1878                         break;
1879                 case PR_SET_TIMING:
1880                         if (arg2 != PR_TIMING_STATISTICAL)
1881                                 error = -EINVAL;
1882                         else
1883                                 error = 0;
1884                         break;
1885
1886                 case PR_SET_NAME:
1887                         comm[sizeof(me->comm)-1] = 0;
1888                         if (strncpy_from_user(comm, (char __user *)arg2,
1889                                               sizeof(me->comm) - 1) < 0)
1890                                 return -EFAULT;
1891                         set_task_comm(me, comm);
1892                         proc_comm_connector(me);
1893                         return 0;
1894                 case PR_GET_NAME:
1895                         get_task_comm(comm, me);
1896                         if (copy_to_user((char __user *)arg2, comm,
1897                                          sizeof(comm)))
1898                                 return -EFAULT;
1899                         return 0;
1900                 case PR_GET_ENDIAN:
1901                         error = GET_ENDIAN(me, arg2);
1902                         break;
1903                 case PR_SET_ENDIAN:
1904                         error = SET_ENDIAN(me, arg2);
1905                         break;
1906
1907                 case PR_GET_SECCOMP:
1908                         error = prctl_get_seccomp();
1909                         break;
1910                 case PR_SET_SECCOMP:
1911                         error = prctl_set_seccomp(arg2);
1912                         break;
1913                 case PR_GET_TSC:
1914                         error = GET_TSC_CTL(arg2);
1915                         break;
1916                 case PR_SET_TSC:
1917                         error = SET_TSC_CTL(arg2);
1918                         break;
1919                 case PR_TASK_PERF_EVENTS_DISABLE:
1920                         error = perf_event_task_disable();
1921                         break;
1922                 case PR_TASK_PERF_EVENTS_ENABLE:
1923                         error = perf_event_task_enable();
1924                         break;
1925                 case PR_GET_TIMERSLACK:
1926                         error = current->timer_slack_ns;
1927                         break;
1928                 case PR_SET_TIMERSLACK:
1929                         if (arg2 <= 0)
1930                                 current->timer_slack_ns =
1931                                         current->default_timer_slack_ns;
1932                         else
1933                                 current->timer_slack_ns = arg2;
1934                         error = 0;
1935                         break;
1936                 case PR_MCE_KILL:
1937                         if (arg4 | arg5)
1938                                 return -EINVAL;
1939                         switch (arg2) {
1940                         case PR_MCE_KILL_CLEAR:
1941                                 if (arg3 != 0)
1942                                         return -EINVAL;
1943                                 current->flags &= ~PF_MCE_PROCESS;
1944                                 break;
1945                         case PR_MCE_KILL_SET:
1946                                 current->flags |= PF_MCE_PROCESS;
1947                                 if (arg3 == PR_MCE_KILL_EARLY)
1948                                         current->flags |= PF_MCE_EARLY;
1949                                 else if (arg3 == PR_MCE_KILL_LATE)
1950                                         current->flags &= ~PF_MCE_EARLY;
1951                                 else if (arg3 == PR_MCE_KILL_DEFAULT)
1952                                         current->flags &=
1953                                                 ~(PF_MCE_EARLY|PF_MCE_PROCESS);
1954                                 else
1955                                         return -EINVAL;
1956                                 break;
1957                         default:
1958                                 return -EINVAL;
1959                         }
1960                         error = 0;
1961                         break;
1962                 case PR_MCE_KILL_GET:
1963                         if (arg2 | arg3 | arg4 | arg5)
1964                                 return -EINVAL;
1965                         if (current->flags & PF_MCE_PROCESS)
1966                                 error = (current->flags & PF_MCE_EARLY) ?
1967                                         PR_MCE_KILL_EARLY : PR_MCE_KILL_LATE;
1968                         else
1969                                 error = PR_MCE_KILL_DEFAULT;
1970                         break;
1971                 case PR_SET_MM:
1972                         error = prctl_set_mm(arg2, arg3, arg4, arg5);
1973                         break;
1974                 case PR_SET_CHILD_SUBREAPER:
1975                         me->signal->is_child_subreaper = !!arg2;
1976                         error = 0;
1977                         break;
1978                 case PR_GET_CHILD_SUBREAPER:
1979                         error = put_user(me->signal->is_child_subreaper,
1980                                          (int __user *) arg2);
1981                         break;
1982                 default:
1983                         error = -EINVAL;
1984                         break;
1985         }
1986         return error;
1987 }
1988
1989 SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep,
1990                 struct getcpu_cache __user *, unused)
1991 {
1992         int err = 0;
1993         int cpu = raw_smp_processor_id();
1994         if (cpup)
1995                 err |= put_user(cpu, cpup);
1996         if (nodep)
1997                 err |= put_user(cpu_to_node(cpu), nodep);
1998         return err ? -EFAULT : 0;
1999 }
2000
2001 char poweroff_cmd[POWEROFF_CMD_PATH_LEN] = "/sbin/poweroff";
2002
2003 static void argv_cleanup(struct subprocess_info *info)
2004 {
2005         argv_free(info->argv);
2006 }
2007
2008 /**
2009  * orderly_poweroff - Trigger an orderly system poweroff
2010  * @force: force poweroff if command execution fails
2011  *
2012  * This may be called from any context to trigger a system shutdown.
2013  * If the orderly shutdown fails, it will force an immediate shutdown.
2014  */
2015 int orderly_poweroff(bool force)
2016 {
2017         int argc;
2018         char **argv = argv_split(GFP_ATOMIC, poweroff_cmd, &argc);
2019         static char *envp[] = {
2020                 "HOME=/",
2021                 "PATH=/sbin:/bin:/usr/sbin:/usr/bin",
2022                 NULL
2023         };
2024         int ret = -ENOMEM;
2025         struct subprocess_info *info;
2026
2027         if (argv == NULL) {
2028                 printk(KERN_WARNING "%s failed to allocate memory for \"%s\"\n",
2029                        __func__, poweroff_cmd);
2030                 goto out;
2031         }
2032
2033         info = call_usermodehelper_setup(argv[0], argv, envp, GFP_ATOMIC);
2034         if (info == NULL) {
2035                 argv_free(argv);
2036                 goto out;
2037         }
2038
2039         call_usermodehelper_setfns(info, NULL, argv_cleanup, NULL);
2040
2041         ret = call_usermodehelper_exec(info, UMH_NO_WAIT);
2042
2043   out:
2044         if (ret && force) {
2045                 printk(KERN_WARNING "Failed to start orderly shutdown: "
2046                        "forcing the issue\n");
2047
2048                 /* I guess this should try to kick off some daemon to
2049                    sync and poweroff asap.  Or not even bother syncing
2050                    if we're doing an emergency shutdown? */
2051                 emergency_sync();
2052                 kernel_power_off();
2053         }
2054
2055         return ret;
2056 }
2057 EXPORT_SYMBOL_GPL(orderly_poweroff);