opensuse:kernel.git
4 years agoLinux 3.4.36
Greg Kroah-Hartman [Thu, 14 Mar 2013 18:30:25 +0000 (11:30 -0700)]
Linux 3.4.36

4 years agoUSB: Fix connected device switch to Inactive state.
Sarah Sharp [Wed, 13 Mar 2013 17:59:21 +0000 (10:59 -0700)]
USB: Fix connected device switch to Inactive state.

[This is upstream commit d3b9d7a9051d7024a93c76a84b2f84b3b66ad6d5.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm
reset failure on empty port."]

A USB 3.0 device can transition to the Inactive state if a U1 or U2 exit
transition fails.  The current code in hub_events simply issues a warm
reset, but does not call any pre-reset or post-reset driver methods (or
unbind/rebind drivers without them).  Therefore the drivers won't know
their device has just been reset.

hub_events should instead call usb_reset_device.  This means
hub_port_reset now needs to figure out whether it should issue a warm
reset or a hot reset.

Remove the FIXME note about needing disconnect() for a NOTATTACHED
device.  This patch fixes that.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoRevert "ALSA: hda - hdmi: Make jacks phantom, if they're not detectable"
Greg Kroah-Hartman [Tue, 12 Mar 2013 22:18:13 +0000 (15:18 -0700)]
Revert "ALSA: hda - hdmi: Make jacks phantom, if they're not detectable"

This reverts commit 30efd8debd1ef30be342d374f01e993509f5b76b upstream
(dd54ec4067a23236736afecbda120030d7ce8fe9 in this tree) as it is not
needed for the 3.4-stable tree.

Cc: David Henningsson <david.henningsson@canonical.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoUSB: Rip out recursive call on warm port reset.
Sarah Sharp [Fri, 8 Mar 2013 00:24:24 +0000 (16:24 -0800)]
USB: Rip out recursive call on warm port reset.

[This is upstream commit 24a6078754f28528bc91e7e7b3e6ae86bd936d8.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm
reset failure on empty port."]

When a hot reset fails on a USB 3.0 port, the current port reset code
recursively calls hub_port_reset inside hub_port_wait_reset.  This isn't
ideal, since we should avoid recursive calls in the kernel, and it also
doesn't allow us to issue multiple warm resets on reset failures.

Rip out the recursive call.  Instead, add code to hub_port_reset to
issue a warm reset if the hot reset fails, and try multiple warm resets
before giving up on the port.

In hub_port_wait_reset, remove the recursive call and re-indent.  The
code is basically the same, except:

1. It bails out early if the port has transitioned to Inactive or
Compliance Mode after the reset completed.

2. It doesn't consider a connect status change to be a failed reset.  If
multiple warm resets needed to be issued, the connect status may have
changed, so we need to ignore that and look at the port link state
instead.  hub_port_reset will now do that.

3. It unconditionally sets udev->speed on all types of successful
resets.  The old recursive code would set the port speed when the second
hub_port_reset returned.

The old code did not handle connected devices needing a warm reset well.
There were only two situations that the old code handled correctly: an
empty port needing a warm reset, and a hot reset that migrated to a warm
reset.

When an empty port needed a warm reset, hub_port_reset was called with
the warm variable set.  The code in hub_port_finish_reset would skip
telling the USB core and the xHC host that the device was reset, because
otherwise that would result in a NULL pointer dereference.

When a USB 3.0 device reset migrated to a warm reset, the recursive call
made the call stack look like this:

hub_port_reset(warm = false)
        hub_wait_port_reset(warm = false)
                hub_port_reset(warm = true)
                        hub_wait_port_reset(warm = true)
                        hub_port_finish_reset(warm = true)
                        (return up the call stack to the first wait)

        hub_port_finish_reset(warm = false)

The old code didn't want to notify the USB core or the xHC host of device reset
twice, so it only did it in the second call to hub_port_finish_reset,
when warm was set to false.  This was necessary because
before patch two ("USB: Ignore xHCI Reset Device status."), the USB core
would pay attention to the xHC Reset Device command error status, and
the second call would always fail.

Now that we no longer have the recursive call, and warm can change from
false to true in hub_port_reset, we need to have hub_port_finish_reset
unconditionally notify the USB core and the xHC of the device reset.

In hub_port_finish_reset, unconditionally clear the connect status
change (CSC) bit for USB 3.0 hubs when the port reset is done.  If we
had to issue multiple warm resets for a device, that bit may have been
set if the device went into SS.Inactive and then was successfully warm
reset.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoUSB: Prepare for refactoring by adding extra udev checks.
Sarah Sharp [Fri, 8 Mar 2013 00:24:22 +0000 (16:24 -0800)]
USB: Prepare for refactoring by adding extra udev checks.

[This is upstream commit 2d4fa940f99663c82ba55b2244638833b388e4e2.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm
reset failure on empty port."]

The next patch will refactor the hub port code to rip out the recursive
call to hub_port_reset on a failed hot reset.  In preparation for that,
make sure all code paths can deal with being called with a NULL udev.
The usb_device will not be valid if warm reset was issued because a port
transitioned to the Inactive or Compliance Mode on a device connect.

This patch should have no effect on current behavior.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoUSB: Don't use EHCI port sempahore for USB 3.0 hubs.
Sarah Sharp [Fri, 8 Mar 2013 00:24:19 +0000 (16:24 -0800)]
USB: Don't use EHCI port sempahore for USB 3.0 hubs.

[This is upstream commit 0fe51aa5eee51db7c7ecd201d42a977ad79c58b6.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 9dbcaec830cd97f44a0b91b315844e0d7144746b "USB: Handle warm
reset failure on empty port."]

The EHCI host controller needs to prevent EHCI initialization when the
UHCI or OHCI companion controller is in the middle of a port reset.  It
uses ehci_cf_port_reset_rwsem to do this.  USB 3.0 hubs can't be under
an EHCI host controller, so it makes no sense to down the semaphore for
USB 3.0 hubs.  It also makes the warm port reset code more complex.

Don't down ehci_cf_port_reset_rwsem for USB 3.0 hubs.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agodmi_scan: fix missing check for _DMI_ signature in smbios_present()
Ben Hutchings [Fri, 8 Mar 2013 20:43:32 +0000 (12:43 -0800)]
dmi_scan: fix missing check for _DMI_ signature in smbios_present()

commit a40e7cf8f06b4e322ba902e4e9f6a6b0c2daa907 upstream.

Commit 9f9c9cbb6057 ("drivers/firmware/dmi_scan.c: fetch dmi version
from SMBIOS if it exists") hoisted the check for "_DMI_" into
dmi_scan_machine(), which means that we don't bother to check for
"_DMI_" at offset 16 in an SMBIOS entry.  smbios_present() may also call
dmi_present() for an address where we found "_SM_", if it failed further
validation.

Check for "_DMI_" in smbios_present() before calling dmi_present().

[akpm@linux-foundation.org: fix build]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: Tim McGrath <tmhikaru@gmail.com>
Tested-by: Tim Mcgrath <tmhikaru@gmail.com>
Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoftrace: Update the kconfig for DYNAMIC_FTRACE
Steven Rostedt [Thu, 28 Feb 2013 02:48:09 +0000 (21:48 -0500)]
ftrace: Update the kconfig for DYNAMIC_FTRACE

commit db05021d49a994ee40a9735d9c3cb0060c9babb8 upstream.

The prompt to enable DYNAMIC_FTRACE (the ability to nop and
enable function tracing at run time) had a confusing statement:

 "enable/disable ftrace tracepoints dynamically"

This was written before tracepoints were added to the kernel,
but now that tracepoints have been added, this is very confusing
and has confused people enough to give wrong information during
presentations.

Not only that, I looked at the help text, and it still references
that dreaded daemon that use to wake up once a second to update
the nop locations and brick NICs, that hasn't been around for over
five years.

Time to bring the text up to the current decade.

Reported-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoFix memory leak in cpufreq stats.
Tu, Xiaobing [Mon, 22 Oct 2012 23:03:00 +0000 (01:03 +0200)]
Fix memory leak in cpufreq stats.

commit e37736777254ce1abc85493a5cacbefe5983b896 upstream.

When system enters sleep, non-boot CPUs will be disabled.
Cpufreq stats sysfs is created when the CPU is up, but it is not
freed when the CPU is going down. This will cause memory leak.

Signed-off-by: xiaobing tu <xiaobing.tu@intel.com>
Signed-off-by: guifang tang <guifang.tang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Colin Cross <ccross@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agovfs: fix pipe counter breakage
Al Viro [Tue, 12 Mar 2013 02:59:49 +0000 (02:59 +0000)]
vfs: fix pipe counter breakage

commit a930d8790552658140d7d0d2e316af4f0d76a512 upstream.

If you open a pipe for neither read nor write, the pipe code will not
add any usage counters to the pipe, causing the 'struct pipe_inode_info"
to be potentially released early.

That doesn't normally matter, since you cannot actually use the pipe,
but the pipe release code - particularly fasync handling - still expects
the actual pipe infrastructure to all be there.  And rather than adding
NULL pointer checks, let's just disallow this case, the same way we
already do for the named pipe ("fifo") case.

This is ancient going back to pre-2.4 days, and until trinity, nobody
naver noticed.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoFix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keys
Mathieu Desnoyers [Mon, 25 Feb 2013 15:20:36 +0000 (10:20 -0500)]
Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keys

commit 8aec0f5d4137532de14e6554fd5dd201ff3a3c49 upstream.

Looking at mm/process_vm_access.c:process_vm_rw() and comparing it to
compat_process_vm_rw() shows that the compatibility code requires an
explicit "access_ok()" check before calling
compat_rw_copy_check_uvector(). The same difference seems to appear when
we compare fs/read_write.c:do_readv_writev() to
fs/compat.c:compat_do_readv_writev().

This subtle difference between the compat and non-compat requirements
should probably be debated, as it seems to be error-prone. In fact,
there are two others sites that use this function in the Linux kernel,
and they both seem to get it wrong:

Now shifting our attention to fs/aio.c, we see that aio_setup_iocb()
also ends up calling compat_rw_copy_check_uvector() through
aio_setup_vectored_rw(). Unfortunately, the access_ok() check appears to
be missing. Same situation for
security/keys/compat.c:compat_keyctl_instantiate_key_iov().

I propose that we add the access_ok() check directly into
compat_rw_copy_check_uvector(), so callers don't have to worry about it,
and it therefore makes the compat call code similar to its non-compat
counterpart. Place the access_ok() check in the same location where
copy_from_user() can trigger a -EFAULT error in the non-compat code, so
the ABI behaviors are alike on both compat and non-compat.

While we are here, fix compat_do_readv_writev() so it checks for
compat_rw_copy_check_uvector() negative return values.

And also, fix a memory leak in compat_keyctl_instantiate_key_iov() error
handling.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agokeys: fix race with concurrent install_user_keyrings()
David Howells [Tue, 12 Mar 2013 05:44:31 +0000 (16:44 +1100)]
keys: fix race with concurrent install_user_keyrings()

commit 0da9dfdd2cd9889201bc6f6f43580c99165cd087 upstream.

This fixes CVE-2013-1792.

There is a race in install_user_keyrings() that can cause a NULL pointer
dereference when called concurrently for the same user if the uid and
uid-session keyrings are not yet created.  It might be possible for an
unprivileged user to trigger this by calling keyctl() from userspace in
parallel immediately after logging in.

Assume that we have two threads both executing lookup_user_key(), both
looking for KEY_SPEC_USER_SESSION_KEYRING.

THREAD A THREAD B
=============================== ===============================
==>call install_user_keyrings();
if (!cred->user->session_keyring)
==>call install_user_keyrings()
...
user->uid_keyring = uid_keyring;
if (user->uid_keyring)
return 0;
<==
key = cred->user->session_keyring [== NULL]
user->session_keyring = session_keyring;
atomic_inc(&key->usage); [oops]

At the point thread A dereferences cred->user->session_keyring, thread B
hasn't updated user->session_keyring yet, but thread A assumes it is
populated because install_user_keyrings() returned ok.

The race window is really small but can be exploited if, for example,
thread B is interrupted or preempted after initializing uid_keyring, but
before doing setting session_keyring.

This couldn't be reproduced on a stock kernel.  However, after placing
systemtap probe on 'user->session_keyring = session_keyring;' that
introduced some delay, the kernel could be crashed reliably.

Fix this by checking both pointers before deciding whether to return.
Alternatively, the test could be done away with entirely as it is checked
inside the mutex - but since the mutex is global, that may not be the best
way.

Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: Mateusz Guzik <mguzik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agocrypto: user - fix info leaks in report API
Mathias Krause [Tue, 5 Feb 2013 17:19:13 +0000 (18:19 +0100)]
crypto: user - fix info leaks in report API

commit 9a5467bf7b6e9e02ec9c3da4e23747c05faeaac6 upstream.

Three errors resulting in kernel memory disclosure:

1/ The structures used for the netlink based crypto algorithm report API
are located on the stack. As snprintf() does not fill the remainder of
the buffer with null bytes, those stack bytes will be disclosed to users
of the API. Switch to strncpy() to fix this.

2/ crypto_report_one() does not initialize all field of struct
crypto_user_alg. Fix this to fix the heap info leak.

3/ For the module name we should copy only as many bytes as
module_name() returns -- not as much as the destination buffer could
hold. But the current code does not and therefore copies random data
from behind the end of the module name, as the module name is always
shorter than CRYPTO_MAX_ALG_NAME.

Also switch to use strncpy() to copy the algorithm's name and
driver_name. They are strings, after all.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoxen/pat: Disable PAT using pat_enabled value.
Konrad Rzeszutek Wilk [Tue, 26 Feb 2013 17:51:27 +0000 (12:51 -0500)]
xen/pat: Disable PAT using pat_enabled value.

commit c79c49826270b8b0061b2fca840fc3f013c8a78a upstream.

The git commit 8eaffa67b43e99ae581622c5133e20b0f48bcef1
(xen/pat: Disable PAT support for now) explains in details why
we want to disable PAT for right now. However that
change was not enough and we should have also disabled
the pat_enabled value. Otherwise we end up with:

mmap-example:3481 map pfn expected mapping type write-back for
[mem 0x00010000-0x00010fff], got uncached-minus
 ------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.8.0/arch/x86/mm/pat.c:774 untrack_pfn+0xb8/0xd0()
mem 0x00010000-0x00010fff], got uncached-minus
------------[ cut here ]------------
WARNING: at /build/buildd/linux-3.8.0/arch/x86/mm/pat.c:774
untrack_pfn+0xb8/0xd0()
...
Pid: 3481, comm: mmap-example Tainted: GF 3.8.0-6-generic #13-Ubuntu
Call Trace:
 [<ffffffff8105879f>] warn_slowpath_common+0x7f/0xc0
 [<ffffffff810587fa>] warn_slowpath_null+0x1a/0x20
 [<ffffffff8104bcc8>] untrack_pfn+0xb8/0xd0
 [<ffffffff81156c1c>] unmap_single_vma+0xac/0x100
 [<ffffffff81157459>] unmap_vmas+0x49/0x90
 [<ffffffff8115f808>] exit_mmap+0x98/0x170
 [<ffffffff810559a4>] mmput+0x64/0x100
 [<ffffffff810560f5>] dup_mm+0x445/0x660
 [<ffffffff81056d9f>] copy_process.part.22+0xa5f/0x1510
 [<ffffffff81057931>] do_fork+0x91/0x350
 [<ffffffff81057c76>] sys_clone+0x16/0x20
 [<ffffffff816ccbf9>] stub_clone+0x69/0x90
 [<ffffffff816cc89d>] ? system_call_fastpath+0x1a/0x1f
---[ end trace 4918cdd0a4c9fea4 ]---

(a similar message shows up if you end up launching 'mcelog')

The call chain is (as analyzed by Liu, Jinsong):
do_fork
  --> copy_process
    --> dup_mm
      --> dup_mmap
        --> copy_page_range
          --> track_pfn_copy
            --> reserve_pfn_range
              --> line 624: flags != want_flags
It comes from different memory types of page table (_PAGE_CACHE_WB) and MTRR
(_PAGE_CACHE_UC_MINUS).

Stefan Bader dug in this deep and found out that:
"That makes it clearer as this will do

reserve_memtype(...)
--> pat_x_mtrr_type
  --> mtrr_type_lookup
    --> __mtrr_type_lookup

And that can return -1/0xff in case of MTRR not being enabled/initialized. Which
is not the case (given there are no messages for it in dmesg). This is not equal
to MTRR_TYPE_WRBACK and thus becomes _PAGE_CACHE_UC_MINUS.

It looks like the problem starts early in reserve_memtype:

        if (!pat_enabled) {
                /* This is identical to page table setting without PAT */
                if (new_type) {
                        if (req_type == _PAGE_CACHE_WC)
                                *new_type = _PAGE_CACHE_UC_MINUS;
                        else
                                *new_type = req_type & _PAGE_CACHE_MASK;
                }
                return 0;
        }

This would be what we want, that is clearing the PWT and PCD flags from the
supported flags - if pat_enabled is disabled."

This patch does that - disabling PAT.

Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reported-and-Tested-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoHID: logitech-dj: do not directly call hid_output_raw_report() during probe
Benjamin Tissoires [Tue, 5 Mar 2013 16:09:00 +0000 (17:09 +0100)]
HID: logitech-dj: do not directly call hid_output_raw_report() during probe

commit dcd9006b1b053c7b1cebe81333261d4fd492ffeb upstream.

hid_output_raw_report() makes a direct call to usb_control_msg(). However,
some USB3 boards have shown that the usb device is not ready during the
.probe(). This blocks the entire usb device, and the paired mice, keyboards
are not functional. The dmesg output is the following:

[   11.912287] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[   11.912537] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32
[   11.912636] logitech-djreceiver: probe of 0003:046D:C52B.0003 failed with error -32

Relying on the scheduled call to usbhid_submit_report() fixes the problem.

related bugs:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1072082
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1039143
https://bugzilla.redhat.com/show_bug.cgi?id=840391
https://bugzilla.kernel.org/show_bug.cgi?id=49781

Reported-and-tested-by: Bob Bowles <bobjohnbowles@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoe1000e: fix pci-device enable-counter balance
Konstantin Khlebnikov [Tue, 5 Mar 2013 09:42:59 +0000 (09:42 +0000)]
e1000e: fix pci-device enable-counter balance

commit 4e0855dff094b0d56d6b5b271e0ce7851cc1e063 upstream.

This patch removes redundant and unbalanced pci_disable_device() from
__e1000_shutdown(). pci_clear_master() is enough, device can go into
suspended state with elevated enable_cnt.

Bug was introduced in commit 23606cf5d1192c2b17912cb2ef6e62f9b11de133
("e1000e / PCI / PM: Add basic runtime PM support (rev. 4)") in v2.6.35

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoALSA: vmaster: Fix slave change notification
Takashi Iwai [Tue, 5 Mar 2013 14:43:39 +0000 (15:43 +0100)]
ALSA: vmaster: Fix slave change notification

commit 2069d483b39a603a5f3428a19d3b4ac89aa97f48 upstream.

When a value of a vmaster slave control is changed, the ctl change
notification is sometimes ignored.  This happens when the master
control overrides, e.g. when the corresponding master control is
muted.  The reason is that slave_put() returns the value of the actual
slave put callback, and it doesn't reflect the virtual slave value
change.

This patch fixes the function just to return 1 whenever a slave value
is changed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoALSA: ice1712: Initialize card->private_data properly
Sean Connor [Thu, 28 Feb 2013 14:20:00 +0000 (09:20 -0500)]
ALSA: ice1712: Initialize card->private_data properly

commit 69a4cfdd444d1fe5c24d29b3a063964ac165d2cd upstream.

Set card->private_data in snd_ice1712_create for fixing NULL
dereference in snd_ice1712_remove().

Signed-off-by: Sean Connor <sconnor004@allyinics.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bit
Will Deacon [Thu, 28 Feb 2013 16:49:11 +0000 (17:49 +0100)]
ARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bit

commit f2fe09b055e2549de41fb107b34c60bac4a1b0cf upstream.

Masked out PMXEVTYPER.NSH means that we can't enable profiling at PL2,
regardless of the settings in the HDCR.

This patch fixes the broken mask.

Reported-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agodrm/radeon: add primary dac adj quirk for R200 board
Alex Deucher [Wed, 27 Feb 2013 17:01:58 +0000 (12:01 -0500)]
drm/radeon: add primary dac adj quirk for R200 board

commit e8fc41377f5037ff7a661ea06adc05f1daec1548 upstream.

vbios values are wrong leading to colors that are
too bright.  Use the default values instead.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agohwmon: (pmbus/ltc2978) Use detected chip ID to select supported functionality
Guenter Roeck [Thu, 21 Feb 2013 18:49:40 +0000 (10:49 -0800)]
hwmon: (pmbus/ltc2978) Use detected chip ID to select supported functionality

commit f366fccd0809f13ba20d64cae3c83f7338c88af7 upstream.

We read the chip ID from the chip, use it to determine if the chip ID provided
to the driver is correct, and report it if wrong. We should also use the
correct chip ID to select supported functionality.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agohwmon: (pmbus/ltc2978) Fix peak attribute handling
Guenter Roeck [Thu, 21 Feb 2013 17:33:25 +0000 (09:33 -0800)]
hwmon: (pmbus/ltc2978) Fix peak attribute handling

commit dbd712c2272764a536e29ad6841dba74989a39d9 upstream.

Peak attributes were not initialized and cleared correctly.
Also, temp2_max is only supported on page 0 and thus does not need to be
an array.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agohwmon: (sht15) Check return value of regulator_enable()
Mark Brown [Sat, 2 Mar 2013 07:33:30 +0000 (15:33 +0800)]
hwmon: (sht15) Check return value of regulator_enable()

commit 3e78080f81481aa8340374d5a37ae033c1cf4272 upstream.

Not having power is a pretty serious error so check that we are able to
enable the supply and error out if we can't.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
4 years agomd: raid0: fix error return from create_stripe_zones.
NeilBrown [Thu, 21 Feb 2013 04:36:38 +0000 (15:36 +1100)]
md: raid0: fix error return from create_stripe_zones.

commit 58ebb34c49fcfcaa029e4b1c1453d92583900f9a upstream.

Create_stripe_zones returns an error slightly differently to
raid0_run and to raid0_takeover_*.

The error returned used by the second was wrong and an error would
result in mddev->private being set to NULL and sooner or later a
crash.

So never return NULL, return ERR_PTR(err), not NULL from
create_stripe_zones.

This bug has been present since 2.6.35 so the fix is suitable
for any kernel since then.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agomd: fix two bugs when attempting to resize RAID0 array.
NeilBrown [Thu, 21 Feb 2013 03:33:17 +0000 (14:33 +1100)]
md: fix two bugs when attempting to resize RAID0 array.

commit a64685399181780998281fe07309a94b25dd24c3 upstream.

You cannot resize a RAID0 array (in terms of making the devices
bigger), but the code doesn't entirely stop you.
So:

 disable setting of the available size on each device for
 RAID0 and Linear devices.  This must not change as doing so
 can change the effective layout of data.

 Make sure that the size that raid0_size() reports is accurate,
 but rounding devices sizes to chunk sizes.  As the device sizes
 cannot change now, this isn't so important, but it is best to be
 safe.

Without this change:
  mdadm --grow /dev/md0 -z max
  mdadm --grow /dev/md0 -Z max
  then read to the end of the array

can cause a BUG in a RAID0 array.

These bugs have been present ever since it became possible
to resize any device, which is a long time.  So the fix is
suitable for any -stable kerenl.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agomd: protect against crash upon fsync on ro array
Sebastian Riemer [Thu, 21 Feb 2013 02:28:09 +0000 (13:28 +1100)]
md: protect against crash upon fsync on ro array

commit bbfa57c0f2243a7c31fd248d22e9861a2802cad5 upstream.

If an fsync occurs on a read-only array, we need to send a
completion for the IO and may not increment the active IO count.
Otherwise, we hit a bug trace and can't stop the MD array anymore.

By advice of Christoph Hellwig we return success upon a flush
request but we return -EROFS for other writes.
We detect flush requests by checking if the bio has zero sectors.

This patch is suitable to any -stable kernel to which it applies.

Signed-off-by: Sebastian Riemer <sebastian.riemer@profitbricks.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: NeilBrown <neilb@suse.de>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoath9k_hw: improve reset reliability after errors
Felix Fietkau [Mon, 25 Feb 2013 19:51:07 +0000 (20:51 +0100)]
ath9k_hw: improve reset reliability after errors

commit 3412f2f086ea7531378fabe756bd4a1109994ae6 upstream.

On many different chips, important aspects of the MAC state are not
fully cleared by a warm reset. This can show up as tx/rx hangs, those
annoying "DMA failed to stop in 10 ms..." messages or other quirks.

On AR933x, the chip can occasionally get stuck in a way that only a
driver unload/reload or a reboot would bring it back to life.

With this patch, a full reset is issued when bringing the chip out of
FULL-SLEEP state (after idle), or if either Rx or Tx was not shut down
properly. This makes the DMA related error messages disappear completely
in my tests on AR933x, and the chip does not get stuck anymore.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoath9k: fix RSSI dummy marker value
Felix Fietkau [Fri, 22 Feb 2013 20:09:17 +0000 (21:09 +0100)]
ath9k: fix RSSI dummy marker value

commit a3d63cadbad97671d740a9698acc2c95d1ca6e79 upstream.

RSSI is being stored internally as s8 in several places. The indication
of an unset RSSI value, ATH_RSSI_DUMMY_MARKER, was supposed to have been
set to 127, but ended up being set to 0x127 because of a code cleanup
mistake. This could lead to invalid signal strength values in a few
places.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agomwifiex: correct sleep delay counter
Avinash Patil [Tue, 26 Feb 2013 00:01:34 +0000 (16:01 -0800)]
mwifiex: correct sleep delay counter

commit 3e7a4ff7c5b6423ddb644df9c41b8b6d2fb79d30 upstream.

Maximum delay for waking up card is 50 ms. Because of typo in
counter, this delay goes to 500ms. This patch fixes the bug.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agohw_random: make buffer usable in scatterlist.
Rusty Russell [Mon, 4 Mar 2013 23:37:08 +0000 (10:07 +1030)]
hw_random: make buffer usable in scatterlist.

commit f7f154f1246ccc5a0a7e9ce50932627d60a0c878 upstream.

virtio_rng feeds the randomness buffer handed by the core directly
into the scatterlist, since commit bb347d98079a547e80bd4722dee1de61e4dca0e8.

However, if CONFIG_HW_RANDOM=m, the static buffer isn't a linear address
(at least on most archs).  We could fix this in virtio_rng, but it's actually
far easier to just do it in the core as virtio_rng would have to allocate
a buffer every time (it doesn't know how much the core will want to read).

Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoata_piix: reenable MS Virtual PC guests
Olaf Hering [Tue, 18 Sep 2012 15:48:01 +0000 (17:48 +0200)]
ata_piix: reenable MS Virtual PC guests

commit d9904344fc4052fbe7e4dc137eba0dcdadf326bd upstream.

An earlier commit cd006086fa5d91414d8ff9ff2b78fbb593878e3c ("ata_piix:
defer disks to the Hyper-V drivers by default") broke MS Virtual PC
guests. Hyper-V guests and Virtual PC guests have nearly identical DMI
info. As a result the driver does currently ignore the emulated hardware
in Virtual PC guests and defers the handling to hv_blkvsc. Since Virtual
PC does not offer paravirtualized drivers no disks will be found in the
guest.

One difference in the DMI info is the product version. This patch adds a
match for MS Virtual PC 2007 and "unignores" the emulated hardware.

This was reported for openSuSE 12.1 in bugzilla:
https://bugzilla.novell.com/show_bug.cgi?id=737532

Here is a detailed list of DMI info from example guests:

hwinfo --bios:

virtual pc guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "VS2005R2"
    Serial: "3178-9905-1533-4840-9282-0569-59"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "5.0"
    Serial: "3178-9905-1533-4840-9282-0569-59"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "5.0"
    Serial: "3178-9905-1533-4840-9282-0569-59"
    Asset Tag: "7188-3705-6309-9738-9645-0364-00"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

win2k8 guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "7.0"
    Serial: "9106-3420-9819-5495-1514-2075-48"
    Asset Tag: "7076-9522-6699-1042-9501-1785-77"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

win2k12 guest:

  System Info: #1
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
    UUID: undefined, but settable
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "Microsoft Corporation"
    Product: "Virtual Machine"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
  Chassis Info: #3
    Manufacturer: "Microsoft Corporation"
    Version: "7.0"
    Serial: "8179-1954-0187-0085-3868-2270-14"
    Asset Tag: "8374-0485-4557-6331-0620-5845-25"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x01 (Other)
    Security Status: 0x01 (Other)

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoSUNRPC: Don't start the retransmission timer when out of socket space
Trond Myklebust [Fri, 22 Feb 2013 19:57:57 +0000 (14:57 -0500)]
SUNRPC: Don't start the retransmission timer when out of socket space

commit a9a6b52ee1baa865283a91eb8d443ee91adfca56 upstream.

If the socket is full, we're better off just waiting until it empties,
or until the connection is broken. The reason why we generally don't
want to time out is that the call to xprt->ops->release_xprt() will
trigger a connection reset, which isn't helpful...

Let's make an exception for soft RPC calls, since they have to provide
timeout guarantees.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoNFS: Don't allow NFS silly-renamed files to be deleted, no signal
Trond Myklebust [Fri, 22 Feb 2013 17:53:43 +0000 (12:53 -0500)]
NFS: Don't allow NFS silly-renamed files to be deleted, no signal

commit 5a7a613a47a715711b3f2d3322a0eac21d459166 upstream.

Commit 73ca100 broke the code that prevents the client from deleting
a silly renamed dentry.  This affected "delete on last close"
semantics as after that commit, nothing prevented removal of
silly-renamed files.  As a result, a process holding a file open
could easily get an ESTALE on the file in a directory where some
other process issued 'rm -rf some_dir_containing_the_file' twice.
Before the commit, any attempt at unlinking silly renamed files would
fail inside may_delete() with -EBUSY because of the
DCACHE_NFSFS_RENAMED flag.  The following testcase demonstrates
the problem:
  tail -f /nfsmnt/dir/file &
  rm -rf /nfsmnt/dir
  rm -rf /nfsmnt/dir
  # second removal does not fail, 'tail' process receives ESTALE

The problem with the above commit is that it unhashes the old and
new dentries from the lookup path, even in the normal case when
a signal is not encountered and it would have been safe to call
d_move.  Unfortunately the old dentry has the special
DCACHE_NFSFS_RENAMED flag set on it.  Unhashing has the
side-effect that future lookups call d_alloc(), allocating a new
dentry without the special flag for any silly-renamed files.  As a
result, subsequent calls to unlink silly renamed files do not fail
but allow the removal to go through.  This will result in ESTALE
errors for any other process doing operations on the file.

To fix this, go back to using d_move on success.
For the signal case, it's unclear what we may safely do beyond d_drop.

Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agocifs: ensure that cifs_get_root() only traverses directories
Jeff Layton [Fri, 1 Feb 2013 20:11:01 +0000 (15:11 -0500)]
cifs: ensure that cifs_get_root() only traverses directories

commit ce2ac52105aa663056dfc17966ebed1bf93e6e64 upstream.

Kjell Braden reported this oops:

[  833.211970] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  833.212816] IP: [<          (null)>]           (null)
[  833.213280] PGD 1b9b2067 PUD e9f7067 PMD 0
[  833.213874] Oops: 0010 [#1] SMP
[  833.214344] CPU 0
[  833.214458] Modules linked in: des_generic md4 nls_utf8 cifs vboxvideo drm snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq bnep rfcomm snd_timer bluetooth snd_seq_device ppdev snd vboxguest parport_pc joydev mac_hid soundcore snd_page_alloc psmouse i2c_piix4 serio_raw lp parport usbhid hid e1000
[  833.215629]
[  833.215629] Pid: 1752, comm: mount.cifs Not tainted 3.0.0-rc7-bisectcifs-fec11dd9a0+ #18 innotek GmbH VirtualBox/VirtualBox
[  833.215629] RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
[  833.215629] RSP: 0018:ffff8800119c9c50  EFLAGS: 00010282
[  833.215629] RAX: ffffffffa02186c0 RBX: ffff88000c427780 RCX: 0000000000000000
[  833.215629] RDX: 0000000000000000 RSI: ffff88000c427780 RDI: ffff88000c4362e8
[  833.215629] RBP: ffff8800119c9c88 R08: ffff88001fc15e30 R09: 00000000d69515c7
[  833.215629] R10: ffffffffa0201972 R11: ffff88000e8f6a28 R12: ffff88000c4362e8
[  833.215629] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88001181aaa6
[  833.215629] FS:  00007f2986171700(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000
[  833.215629] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  833.215629] CR2: 0000000000000000 CR3: 000000001b982000 CR4: 00000000000006f0
[  833.215629] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  833.215629] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  833.215629] Process mount.cifs (pid: 1752, threadinfo ffff8800119c8000, task ffff88001c1c16f0)
[  833.215629] Stack:
[  833.215629]  ffffffff8116a9b5 ffff8800119c9c88 ffffffff81178075 0000000000000286
[  833.215629]  0000000000000000 ffff88000c4276c0 ffff8800119c9ce8 ffff8800119c9cc8
[  833.215629]  ffffffff8116b06e ffff88001bc6fc00 ffff88000c4276c0 ffff88000c4276c0
[  833.215629] Call Trace:
[  833.215629]  [<ffffffff8116a9b5>] ? d_alloc_and_lookup+0x45/0x90
[  833.215629]  [<ffffffff81178075>] ? d_lookup+0x35/0x60
[  833.215629]  [<ffffffff8116b06e>] __lookup_hash.part.14+0x9e/0xc0
[  833.215629]  [<ffffffff8116b1d6>] lookup_one_len+0x146/0x1e0
[  833.215629]  [<ffffffff815e4f7e>] ? _raw_spin_lock+0xe/0x20
[  833.215629]  [<ffffffffa01eef0d>] cifs_do_mount+0x26d/0x500 [cifs]
[  833.215629]  [<ffffffff81163bd3>] mount_fs+0x43/0x1b0
[  833.215629]  [<ffffffff8117d41a>] vfs_kern_mount+0x6a/0xd0
[  833.215629]  [<ffffffff8117e584>] do_kern_mount+0x54/0x110
[  833.215629]  [<ffffffff8117fdc2>] do_mount+0x262/0x840
[  833.215629]  [<ffffffff81108a0e>] ? __get_free_pages+0xe/0x50
[  833.215629]  [<ffffffff8117f9ca>] ? copy_mount_options+0x3a/0x180
[  833.215629]  [<ffffffff8118075d>] sys_mount+0x8d/0xe0
[  833.215629]  [<ffffffff815ece82>] system_call_fastpath+0x16/0x1b
[  833.215629] Code:  Bad RIP value.
[  833.215629] RIP  [<          (null)>]           (null)
[  833.215629]  RSP <ffff8800119c9c50>
[  833.215629] CR2: 0000000000000000
[  833.238525] ---[ end trace ec00758b8d44f529 ]---

When walking down the path on the server, it's possible to hit a
symlink. The path walking code assumes that the caller will handle that
situation properly, but cifs_get_root() isn't set up for it. This patch
prevents the oops by simply returning an error.

A better solution would be to try and chase the symlinks here, but that's
fairly complicated to handle.

Fixes:

    https://bugzilla.kernel.org/show_bug.cgi?id=53221

Reported-and-tested-by: Kjell Braden <afflux@pentabarf.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agobtrfs: Init io_lock after cloning btrfs device struct
Thomas Gleixner [Wed, 20 Feb 2013 19:06:20 +0000 (14:06 -0500)]
btrfs: Init io_lock after cloning btrfs device struct

commit 1cba0cdf5e4dbcd9e5fa5b54d7a028e55e2ca057 upstream.

__btrfs_close_devices() clones btrfs device structs with
memcpy(). Some of the fields in the clone are reinitialized, but it's
missing to init io_lock. In mainline this goes unnoticed, but on RT it
leaves the plist pointing to the original about to be freed lock
struct.

Initialize io_lock after cloning, so no references to the original
struct are left.

Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agotarget/pscsi: Fix page increment
Asias He [Wed, 27 Feb 2013 05:29:29 +0000 (13:29 +0800)]
target/pscsi: Fix page increment

commit 472b72f2db7831d7dbe22ffdff4adee3bd49b05d upstream.

The page++ is wrong. It makes bio_add_pc_page() pointing to a wrong page
address if the 'while (len > 0 && data_len > 0) { ... }' loop is
executed more than one once.

Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoSCSI: storvsc: Initialize the sglist
K. Y. Srinivasan [Wed, 6 Feb 2013 13:15:28 +0000 (05:15 -0800)]
SCSI: storvsc: Initialize the sglist

commit 9d2696e658ef4f209955ddaa987d43f1a1bd81a1 upstream.

Properly initialize scatterlist before using it.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoSCSI: dc395x: uninitialized variable in device_alloc()
Dan Carpenter [Mon, 11 Feb 2013 19:03:18 +0000 (22:03 +0300)]
SCSI: dc395x: uninitialized variable in device_alloc()

commit 208afec4f3be8c51ad6eebe6611dd6d2ad2fa298 upstream.

This bug was introduced back in bitkeeper days in 2003.  We use
"dcb->dev_mode" before it has been initialized.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoxen/pci: We don't do multiple MSI's.
Konrad Rzeszutek Wilk [Thu, 28 Feb 2013 14:05:41 +0000 (09:05 -0500)]
xen/pci: We don't do multiple MSI's.

commit 884ac2978a295b7df3c4a686d3bff6932bbbb460 upstream.

There is no hypercall to setup multiple MSI per PCI device.
As such with these two new commits:
-  08261d87f7d1b6253ab3223756625a5c74532293
   PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto()
5ca72c4f7c412c2002363218901eba5516c476b1
   AHCI: Support multiple MSIs

we would call the PHYSDEVOP_map_pirq 'nvec' times with the same
contents of the PCI device. Sander discovered that we would get
the same PIRQ value 'nvec' times and return said values to the
caller. That of course meant that the device was configured only
with one MSI and AHCI would fail with:

ahci 0000:00:11.0: version 3.0
xen: registering gsi 19 triggering 0 polarity 1
xen: --> pirq=19 -> irq=19 (gsi=19)
(XEN) [2013-02-27 19:43:07] IOAPIC[0]: Set PCI routing entry (6-19 -> 0x99 -> IRQ 19 Mode:1 Active:1)
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
ahci: probe of 0000:00:11.0 failed with error -22

That is b/c in ahci_host_activate the second call to
devm_request_threaded_irq  would return -EINVAL as we passed in
(on the second run) an IRQ that was never initialized.

Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoARM: fix scheduling while atomic warning in alignment handling code
Russell King [Mon, 25 Feb 2013 16:10:42 +0000 (16:10 +0000)]
ARM: fix scheduling while atomic warning in alignment handling code

commit b255188f90e2bade1bd11a986dd1ca4861869f4d upstream.

Paolo Pisati reports that IPv6 triggers this warning:

BUG: scheduling while atomic: swapper/0/0/0x40000100
Modules linked in:
[<c001b1c4>] (unwind_backtrace+0x0/0xf0) from [<c0503c5c>] (__schedule_bug+0x48/0x5c)
[<c0503c5c>] (__schedule_bug+0x48/0x5c) from [<c0508608>] (__schedule+0x700/0x740)
[<c0508608>] (__schedule+0x700/0x740) from [<c007007c>] (__cond_resched+0x24/0x34)
[<c007007c>] (__cond_resched+0x24/0x34) from [<c05086dc>] (_cond_resched+0x3c/0x44)
[<c05086dc>] (_cond_resched+0x3c/0x44) from [<c0021f6c>] (do_alignment+0x178/0x78c)
[<c0021f6c>] (do_alignment+0x178/0x78c) from [<c00083e0>] (do_DataAbort+0x34/0x98)
[<c00083e0>] (do_DataAbort+0x34/0x98) from [<c0509a60>] (__dabt_svc+0x40/0x60)
Exception stack(0xc0763d70 to 0xc0763db8)
3d60:                                     e97e805e e97e806e 2c000000 11000000
3d80: ea86bb00 0000002c 00000011 e97e807e c076d2a8 e97e805e e97e806e 0000002c
3da0: 3d000000 c0763dbc c04b98fc c02a8490 00000113 ffffffff
[<c0509a60>] (__dabt_svc+0x40/0x60) from [<c02a8490>] (__csum_ipv6_magic+0x8/0xc8)

Fix this by using probe_kernel_address() stead of __get_user().

Reported-by: Paolo Pisati <p.pisati@gmail.com>
Tested-by: Paolo Pisati <p.pisati@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoARM: VFP: fix emulation of second VFP instruction
Russell King [Mon, 25 Feb 2013 16:09:12 +0000 (16:09 +0000)]
ARM: VFP: fix emulation of second VFP instruction

commit 5e4ba617c1b584b2e376f31a63bd4e734109318a upstream.

Martin Storsjö reports that the sequence:

        ee312ac1        vsub.f32        s4, s3, s2
        ee702ac0        vsub.f32        s5, s1, s0
        e59f0028        ldr             r0, [pc, #40]
        ee111a90        vmov            r1, s3

on Raspberry Pi (implementor 41 architecture 1 part 20 variant b rev 5)
where s3 is a denormal and s2 is zero results in incorrect behaviour -
the instruction "vsub.f32 s5, s1, s0" is not executed:

        VFP: bounce: trigger ee111a90 fpexc d0000780
        VFP: emulate: INST=0xee312ac1 SCR=0x00000000
        ...

As we can see, the instruction triggering the exception is the "vmov"
instruction, and we emulate the "vsub.f32 s4, s3, s2" but fail to
properly take account of the FPEXC_FP2V flag in FPEXC.  This is because
the test for the second instruction register being valid is bogus, and
will always skip emulation of the second instruction.

Reported-by: Martin Storsjö <martin@martin.st>
Tested-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoLinux 3.4.35
Greg Kroah-Hartman [Sun, 3 Mar 2013 22:07:21 +0000 (06:07 +0800)]
Linux 3.4.35

4 years agousb hid quirks for Masterkit MA901 usb radio
Alexey Klimov [Mon, 12 Nov 2012 05:57:03 +0000 (02:57 -0300)]
usb hid quirks for Masterkit MA901 usb radio

commit 0322bd3980b3ebf7dde8474e22614cb443d6479a upstream.

Don't let Masterkit MA901 USB radio be handled by usb hid drivers.
This device will be handled by radio-ma901.c driver.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoata_piix: Add Device IDs for Intel Wellsburg PCH
James Ralston [Sat, 9 Feb 2013 01:24:12 +0000 (17:24 -0800)]
ata_piix: Add Device IDs for Intel Wellsburg PCH

commit 3aee8bc52c415aba8148f144e5e5359b0fd75dd1 upstream.

This patch adds the IDE-mode SATA Device IDs for the Intel Wellsburg PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs
Seth Heasley [Fri, 25 Jan 2013 19:57:05 +0000 (11:57 -0800)]
ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs

commit aaa515277db9585eeb4fdeb4637b9f9df50a1dd9 upstream.

This patch adds the IDE-mode SATA DeviceIDs for the Intel Avoton SOC.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoperf tools: Fix build with bison 2.3 and older.
Vinson Lee [Wed, 27 Feb 2013 02:30:30 +0000 (18:30 -0800)]
perf tools: Fix build with bison 2.3 and older.

commit 85df3b3769222894e9692b383c7af124b7721086 upstream.

The %name-prefix "prefix" syntax is not available on bison 2.3 and
older. Substitute with the -p "prefix" command-line option for
compatibility with older versions of bison.

This patch fixes this build error with older versions of bison.

    CC util/sysfs.o
    BISON util/pmu-bison.c
util/pmu.y:2.14-24: syntax error, unexpected string, expecting =
make: *** [util/pmu-bison.c] Error 1

Signed-off-by: Vinson Lee <vlee@twitter.com>
Tested-by: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1360792138-29186-1-git-send-email-vlee@twitter.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agostaging: comedi: check s->async for poll(), read() and write()
Ian Abbott [Wed, 27 Feb 2013 10:56:19 +0000 (10:56 +0000)]
staging: comedi: check s->async for poll(), read() and write()

commit cc400e185c07c15a42d2635995f422de5b94b696 upstream.

Some low-level comedi drivers (incorrectly) point `dev->read_subdev` or
`dev->write_subdev` to a subdevice that does not support asynchronous
commands.  Comedi's poll(), read() and write() file operation handlers
assume these subdevices do support asynchronous commands.  In
particular, they assume `s->async` is valid (where `s` points to the
read or write subdevice), which it won't be if it has been set
incorrectly.  This can lead to a NULL pointer dereference.

Check `s->async` is non-NULL in `comedi_poll()`, `comedi_read()` and
`comedi_write()` to avoid the bug.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agostaging: comedi: ni_labpc: set up command4 register *after* command3
Ian Abbott [Wed, 27 Feb 2013 12:52:46 +0000 (12:52 +0000)]
staging: comedi: ni_labpc: set up command4 register *after* command3

Commit 22056e2b46246d97ff0f7c6e21a77b8daa07f02c upstream.

Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings.  He tracked it down to two
problems, one of which is addressed by this patch.

It seems that writing to the command3 register after writing to the
command4 register in `labpc_ai_cmd()` messes up the differential
reference bit setting in the command4 register.  Set up the command4
register after the command3 register (as in `labpc_ai_rinsn()`) to avoid
the problem.

Thanks to Tuomas for suggesting the fix.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agostaging: comedi: ni_labpc: correct differential channel sequence for AI commands
Ian Abbott [Wed, 27 Feb 2013 12:52:45 +0000 (12:52 +0000)]
staging: comedi: ni_labpc: correct differential channel sequence for AI commands

Commit 4c4bc25d0fa6beaf054c0b4c3b324487f266c820 upstream.

Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings.  He tracked it down to two
problems, one of which is addressed by this patch.

It seems the setting of the channel bits for particular scanning modes
was incorrect for differential mode.  (Only half the number of channels
are available in differential mode; comedi refers to them as channels 0,
1, 2 and 3, but the hardware documentation refers to them as channels 0,
2, 4 and 6.)  In differential mode, the setting of the channel enable
bits in the command1 register should depend on whether the scan enable
bit is set.  Effectively, we need to double the comedi channel number
when the scan enable bit is not set in differential mode.  The scan
enable bit gets set when the AI scan mode is `MODE_MULT_CHAN_UP` or
`MODE_MULT_CHAN_DOWN`, and gets cleared when the AI scan mode is
`MODE_SINGLE_CHAN` or `MODE_SINGLE_CHAN_INTERVAL`.  The existing test
for whether the comedi channel number needs to be doubled in
differential mode is incorrect in `labpc_ai_cmd()`.  This patch corrects
the test.

Thanks to Tuomas for suggesting the fix.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoACPI: Add DMI entry for Sony VGN-FW41E_H
Joseph Salisbury [Tue, 5 Feb 2013 00:16:29 +0000 (00:16 +0000)]
ACPI: Add DMI entry for Sony VGN-FW41E_H

commit 66f2fda93b67fa744d406e6dcf443f67bac204b6 upstream.

This patch adds a quirk to allow the Sony VGN-FW41E_H to suspend/resume
properly.

References: http://bugs.launchpad.net/bugs/1113547
Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoab8500_btemp: Demote initcall sequence
Rajanikanth H.V [Wed, 23 Jan 2013 04:26:45 +0000 (09:56 +0530)]
ab8500_btemp: Demote initcall sequence

commit eeb0751c99522a4d1bbcc7b6bc1460cd07d07488 upstream.

Power supply subsystem creates thermal zone device for the property
'POWER_SUPPLY_PROP_TEMP' which requires thermal subsystem to be ready
before 'ab8500 battery temperature monitor' driver is initialized. ab8500
btemp driver is initialized with subsys_initcall whereas thermal subsystem
is initialized with fs_initcall which causes
thermal_zone_device_register(...) to crash since the required structure
'thermal_class' is not initialized yet:

Unable to handle kernel NULL pointer dereference at virtual address 000000a4
pgd = c0004000
[000000a4] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0    Tainted: G        W     (3.8.0-rc4-00001-g632fda8-dirty #1)
PC is at _raw_spin_lock+0x18/0x54
LR is at get_device_parent+0x50/0x1b8
pc : [<c02f1dd0>]    lr : [<c01cb248>]    psr: 60000013
sp : ef04bdc8  ip : 00000000  fp : c0446180
r10: ef216e38  r9 : c03af5d0  r8 : ef275c18
r7 : 00000000  r6 : c0476c14  r5 : ef275c18  r4 : ef095840
r3 : ef04a000  r2 : 00000001  r1 : 00000000  r0 : 000000a4
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5787d  Table: 0000404a  DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xef04a238)
Stack: (0xef04bdc8 to 0xef04c000)
[...]
[<c02f1dd0>] (_raw_spin_lock+0x18/0x54) from [<c01cb248>] (get_device_parent+0x50/0x1b8)
[<c01cb248>] (get_device_parent+0x50/0x1b8) from [<c01cb8d8>] (device_add+0xa4/0x574)
[<c01cb8d8>] (device_add+0xa4/0x574) from [<c020b91c>] (thermal_zone_device_register+0x118/0x938)
[<c020b91c>] (thermal_zone_device_register+0x118/0x938) from [<c0202030>] (power_supply_register+0x170/0x1f8)
[<c0202030>] (power_supply_register+0x170/0x1f8) from [<c02055ec>] (ab8500_btemp_probe+0x208/0x47c)
[<c02055ec>] (ab8500_btemp_probe+0x208/0x47c) from [<c01cf0dc>] (platform_drv_probe+0x14/0x18)
[<c01cf0dc>] (platform_drv_probe+0x14/0x18) from [<c01cde70>] (driver_probe_device+0x74/0x20c)
[<c01cde70>] (driver_probe_device+0x74/0x20c) from [<c01ce094>] (__driver_attach+0x8c/0x90)
[<c01ce094>] (__driver_attach+0x8c/0x90) from [<c01cc640>] (bus_for_each_dev+0x4c/0x80)
[<c01cc640>] (bus_for_each_dev+0x4c/0x80) from [<c01cd6b4>] (bus_add_driver+0x16c/0x23c)
[<c01cd6b4>] (bus_add_driver+0x16c/0x23c) from [<c01ce54c>] (driver_register+0x78/0x14c)
[<c01ce54c>] (driver_register+0x78/0x14c) from [<c00086ac>] (do_one_initcall+0xfc/0x164)
[<c00086ac>] (do_one_initcall+0xfc/0x164) from [<c02e89c8>] (kernel_init+0x120/0x2b8)
[<c02e89c8>] (kernel_init+0x120/0x2b8) from [<c000e358>] (ret_from_fork+0x14/0x3c)
Code: e3c3303f e5932004 e2822001 e5832004 (e1903f9f)
---[ end trace ed9df72941b5bada ]---

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoab8500-chargalg: Only root should have write permission on sysfs file
Lee Jones [Thu, 17 Jan 2013 14:21:53 +0000 (14:21 +0000)]
ab8500-chargalg: Only root should have write permission on sysfs file

commit e3455002d04276c256a531f7175dce0f7d1cb78a upstream.

Only root should have write permission on sysfs file ab8500_chargalg/chargalg.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agocgroup: fix exit() vs rmdir() race
Li Zefan [Thu, 24 Jan 2013 06:43:28 +0000 (14:43 +0800)]
cgroup: fix exit() vs rmdir() race

commit 71b5707e119653039e6e95213f00479668c79b75 upstream.

In cgroup_exit() put_css_set_taskexit() is called without any lock,
which might lead to accessing a freed cgroup:

thread1                           thread2
---------------------------------------------
exit()
  cgroup_exit()
    put_css_set_taskexit()
      atomic_dec(cgrp->count);
                                   rmdir();
      /* not safe !! */
      check_for_release(cgrp);

rcu_read_lock() can be used to make sure the cgroup is alive.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agocpuset: fix cpuset_print_task_mems_allowed() vs rename() race
Li Zefan [Fri, 25 Jan 2013 08:08:01 +0000 (16:08 +0800)]
cpuset: fix cpuset_print_task_mems_allowed() vs rename() race

commit 63f43f55c9bbc14f76b582644019b8a07dc8219a upstream.

rename() will change dentry->d_name. The result of this race can
be worse than seeing partially rewritten name, but we might access
a stale pointer because rename() will re-allocate memory to hold
a longer name.

It's safe in the protection of dentry->d_lock.

v2: check NULL dentry before acquiring dentry lock.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agopstore: Avoid deadlock in panic and emergency-restart path
Seiji Aguchi [Fri, 11 Jan 2013 18:09:41 +0000 (18:09 +0000)]
pstore: Avoid deadlock in panic and emergency-restart path

commit 9f244e9cfd70c7c0f82d3c92ce772ab2a92d9f64 upstream.

[Issue]

When pstore is in panic and emergency-restart paths, it may be blocked
in those paths because it simply takes spin_lock.

This is an example scenario which pstore may hang up in a panic path:

 - cpuA grabs psinfo->buf_lock
 - cpuB panics and calls smp_send_stop
 - smp_send_stop sends IRQ to cpuA
 - after 1 second, cpuB gives up on cpuA and sends an NMI instead
 - cpuA is now in an NMI handler while still holding buf_lock
 - cpuB is deadlocked

This case may happen if a firmware has a bug and
cpuA is stuck talking with it more than one second.

Also, this is a similar scenario in an emergency-restart path:

 - cpuA grabs psinfo->buf_lock and stucks in a firmware
 - cpuB kicks emergency-restart via either sysrq-b or hangcheck timer.
   And then, cpuB is deadlocked by taking psinfo->buf_lock again.

[Solution]

This patch avoids the deadlocking issues in both panic and emergency_restart
paths by introducing a function, is_non_blocking_path(), to check if a cpu
can be blocked in current path.

With this patch, pstore is not blocked even if another cpu has
taken a spin_lock, in those paths by changing from spin_lock_irqsave
to spin_trylock_irqsave.

In addition, according to a comment of emergency_restart() in kernel/sys.c,
spin_lock shouldn't be taken in an emergency_restart path to avoid
deadlock. This patch fits the comment below.

<snip>
/**
 *      emergency_restart - reboot the system
 *
 *      Without shutting down any hardware or taking any locks
 *      reboot the system.  This is called when we know we are in
 *      trouble so this is our best effort to reboot.  This is
 *      safe to call in interrupt context.
 */
void emergency_restart(void)
<snip>

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoath9k_hw: fix calibration issues on chainmask that don't include chain 0
Felix Fietkau [Sun, 20 Jan 2013 20:55:20 +0000 (21:55 +0100)]
ath9k_hw: fix calibration issues on chainmask that don't include chain 0

commit 4a8f199508d79ff8a7d1e22f47b912baaf225336 upstream.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Reviewed-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agounbreak automounter support on 64-bit kernel with 32-bit userspace (v2)
Helge Deller [Mon, 4 Feb 2013 19:39:52 +0000 (19:39 +0000)]
unbreak automounter support on 64-bit kernel with 32-bit userspace (v2)

commit 4f4ffc3a5398ef9bdbb32db04756d7d34e356fcf upstream.

automount-support is broken on the parisc architecture, because the existing
#if list does not include a check for defined(__hppa__). The HPPA (parisc)
architecture is similiar to other 64bit Linux targets where we have to define
autofs_wqt_t (which is passed back and forth to user space) as int type which
has a size of 32bit across 32 and 64bit kernels.

During the discussion on the mailing list, H. Peter Anvin suggested to invert
the #if list since only specific platforms (specifically those who do not have
a 32bit userspace, like IA64 and Alpha) should have autofs_wqt_t as unsigned
long type.

This suggestion is probably the best way to go, since Arm64 (and maybe others?)
seems to have a non-working automounter. So in the long run even for other new
upcoming architectures this inverted check seem to be the best solution, since
it will not require them to change this #if again (unless they are 64bit only).

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Ian Kent <raven@themaw.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
CC: James Bottomley <James.Bottomley@HansenPartnership.com>
CC: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agofuse: don't WARN when nlink is zero
Miklos Szeredi [Mon, 4 Feb 2013 14:57:42 +0000 (15:57 +0100)]
fuse: don't WARN when nlink is zero

commit dfca7cebc2679f3d129f8e680a8f199a7ad16e38 upstream.

drop_nlink() warns if nlink is already zero.  This is triggerable by a buggy
userspace filesystem.  The cure, I think, is worse than the disease so disable
the warning.

Reported-by: Tero Roponen <tero.roponen@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agovhost: fix length for cross region descriptor
Michael S. Tsirkin [Mon, 26 Nov 2012 05:57:27 +0000 (05:57 +0000)]
vhost: fix length for cross region descriptor

commit bd97120fc3d1a11f3124c7c9ba1d91f51829eb85 upstream.

If a single descriptor crosses a region, the
second chunk length should be decremented
by size translated so far, instead it includes
the full descriptor length.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agosvcrpc: make svc_age_temp_xprts enqueue under sv_lock
J. Bruce Fields [Sun, 10 Feb 2013 16:33:48 +0000 (11:33 -0500)]
svcrpc: make svc_age_temp_xprts enqueue under sv_lock

commit e75bafbff2270993926abcc31358361db74a9bc2 upstream.

svc_age_temp_xprts expires xprts in a two-step process: first it takes
the sv_lock and moves the xprts to expire off their server-wide list
(sv_tempsocks or sv_permsocks) to a local list.  Then it drops the
sv_lock and enqueues and puts each one.

I see no reason for this: svc_xprt_enqueue() will take sp_lock, but the
sv_lock and sp_lock are not otherwise nested anywhere (and documentation
at the top of this file claims it's correct to nest these with sp_lock
inside.)

Tested-by: Jason Tibbitts <tibbs@math.uh.edu>
Tested-by: Paweł Sikora <pawel.sikora@agmk.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agonfsd: Fix memleak
majianpeng [Tue, 29 Jan 2013 05:16:06 +0000 (13:16 +0800)]
nfsd: Fix memleak

commit 2d32b29a1c2830f7c42caa8258c714acd983961f upstream.

When free nfs-client, it must free the ->cl_stateids.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoext4: fix free clusters calculation in bigalloc filesystem
Lukas Czerner [Fri, 22 Feb 2013 20:27:52 +0000 (15:27 -0500)]
ext4: fix free clusters calculation in bigalloc filesystem

commit 304e220f0879198b1f5309ad6f0be862b4009491 upstream.

ext4_has_free_clusters() should tell us whether there is enough free
clusters to allocate, however number of free clusters in the file system
is converted to blocks using EXT4_C2B() which is not only wrong use of
the macro (we should have used EXT4_NUM_B2C) but it's also completely
wrong concept since everything else is in cluster units.

Moreover when calculating number of root clusters we should be using
macro EXT4_NUM_B2C() instead of EXT4_B2C() otherwise the result might be
off by one. However r_blocks_count should always be a multiple of the
cluster ratio so doing a plain bit shift should be enough here. We
avoid using EXT4_B2C() because it's confusing.

As a result of the first problem number of free clusters is much bigger
than it should have been and ext4_has_free_clusters() would return 1 even
if there is really not enough free clusters available.

Fix this by removing the EXT4_C2B() conversion of free clusters and
using bit shift when calculating number of root clusters. This bug
affects number of xfstests tests covering file system ENOSPC situation
handling. With this patch most of the ENOSPC problems with bigalloc file
system disappear, especially the errors caused by delayed allocation not
having enough space when the actual allocation is finally requested.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoext4: fix xattr block allocation/release with bigalloc
Lukas Czerner [Mon, 18 Feb 2013 17:12:07 +0000 (12:12 -0500)]
ext4: fix xattr block allocation/release with bigalloc

commit 1231b3a1eb5740192aeebf5344dd6d6da000febf upstream.

Currently when new xattr block is created or released we we would call
dquot_free_block() or dquot_alloc_block() respectively, among the else
decrementing or incrementing the number of blocks assigned to the
inode by one block.

This however does not work for bigalloc file system because we always
allocate/free the whole cluster so we have to count with that in
dquot_free_block() and dquot_alloc_block() as well.

Use the clusters-to-blocks conversion EXT4_C2B() when passing number of
blocks to the dquot_alloc/free functions to fix the problem.

The problem has been revealed by xfstests #117 (and possibly others).

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoext4: fix race in ext4_mb_add_n_trim()
Niu Yawei [Sat, 2 Feb 2013 02:31:27 +0000 (21:31 -0500)]
ext4: fix race in ext4_mb_add_n_trim()

commit f1167009711032b0d747ec89a632a626c901a1ad upstream.

In ext4_mb_add_n_trim(), lg_prealloc_lock should be taken when
changing the lg_prealloc_list.

Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoext4: check bh in ext4_read_block_bitmap()
Eryu Guan [Sat, 12 Jan 2013 21:33:25 +0000 (16:33 -0500)]
ext4: check bh in ext4_read_block_bitmap()

commit 15b49132fc972c63894592f218ea5a9a61b1a18f upstream.

Validate the bh pointer before using it, since
ext4_read_block_bitmap_nowait() might return NULL.

I've seen this in fsfuzz testing.

 EXT4-fs error (device loop0): ext4_read_block_bitmap_nowait:385: comm touch: Cannot get buffer for block bitmap - block_group = 0, block_bitmap = 3925999616
 BUG: unable to handle kernel NULL pointer dereference at           (null)
 IP: [<ffffffff8121de25>] ext4_wait_block_bitmap+0x25/0xe0
 ...
 Call Trace:
  [<ffffffff8121e1e5>] ext4_read_block_bitmap+0x35/0x60
  [<ffffffff8125e9c6>] ext4_free_blocks+0x236/0xb80
  [<ffffffff811d0d36>] ? __getblk+0x36/0x70
  [<ffffffff811d0a5f>] ? __find_get_block+0x8f/0x210
  [<ffffffff81191ef3>] ? kmem_cache_free+0x33/0x140
  [<ffffffff812678e5>] ext4_xattr_release_block+0x1b5/0x1d0
  [<ffffffff812679be>] ext4_xattr_delete_inode+0xbe/0x100
  [<ffffffff81222a7c>] ext4_free_inode+0x7c/0x4d0
  [<ffffffff812277b8>] ? ext4_mark_inode_dirty+0x88/0x230
  [<ffffffff8122993c>] ext4_evict_inode+0x32c/0x490
  [<ffffffff811b8cd7>] evict+0xa7/0x1c0
  [<ffffffff811b8ed3>] iput_final+0xe3/0x170
  [<ffffffff811b8f9e>] iput+0x3e/0x50
  [<ffffffff812316fd>] ext4_add_nondir+0x4d/0x90
  [<ffffffff81231d0b>] ext4_create+0xeb/0x170
  [<ffffffff811aae9c>] vfs_create+0xac/0xd0
  [<ffffffff811ac845>] lookup_open+0x185/0x1c0
  [<ffffffff8129e3b9>] ? selinux_inode_permission+0xa9/0x170
  [<ffffffff811acb54>] do_last+0x2d4/0x7a0
  [<ffffffff811af743>] path_openat+0xb3/0x480
  [<ffffffff8116a8a1>] ? handle_mm_fault+0x251/0x3b0
  [<ffffffff811afc49>] do_filp_open+0x49/0xa0
  [<ffffffff811bbaad>] ? __alloc_fd+0xdd/0x150
  [<ffffffff8119da28>] do_sys_open+0x108/0x1f0
  [<ffffffff8119db51>] sys_open+0x21/0x30
  [<ffffffff81618959>] system_call_fastpath+0x16/0x1b

Also fix comment for ext4_read_block_bitmap_nowait()

Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agomedia: rc: unlock on error in show_protocols()
Dan Carpenter [Tue, 27 Nov 2012 16:35:09 +0000 (13:35 -0300)]
media: rc: unlock on error in show_protocols()

commit 30ebc5e44d057a1619ad63fe32c8c1670c37c4b8 upstream.

We recently introduced a new return -ENODEV in this function but we need
to unlock before returning.

[mchehab@redhat.com: found two patches with the same fix. Merged SOB's/acks into one patch]
Acked-by: Herton R. Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Douglas Bagnall <douglas@paradise.net.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agofs: Fix possible use-after-free with AIO
Jan Kara [Tue, 29 Jan 2013 23:28:01 +0000 (00:28 +0100)]
fs: Fix possible use-after-free with AIO

commit 54c807e71d5ac59dee56c685f2b66e27cd54c475 upstream.

Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.

Acked-by: Jeff Moyer <jmoyer@redhat.com>
CC: Christoph Hellwig <hch@infradead.org>
CC: Jens Axboe <axboe@kernel.dk>
CC: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agosysctl: fix null checking in bin_dn_node_address()
Xi Wang [Thu, 28 Feb 2013 01:05:21 +0000 (17:05 -0800)]
sysctl: fix null checking in bin_dn_node_address()

commit df1778be1a33edffa51d094eeda87c858ded6560 upstream.

The null check of `strchr() + 1' is broken, which is always non-null,
leading to OOB read.  Instead, check the result of strchr().

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agofirewire: add minor number range check to fw_device_init()
Tejun Heo [Thu, 28 Feb 2013 01:04:04 +0000 (17:04 -0800)]
firewire: add minor number range check to fw_device_init()

commit 3bec60d511179853138836ae6e1b61fe34d9235f upstream.

fw_device_init() didn't check whether the allocated minor number isn't
too large.  Fail if it goes overflows MINORBITS.

Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoblock: fix synchronization and limit check in blk_alloc_devt()
Tejun Heo [Thu, 28 Feb 2013 01:03:56 +0000 (17:03 -0800)]
block: fix synchronization and limit check in blk_alloc_devt()

commit ce23bba842aee98092225d9576dba47c82352521 upstream.

idr allocation in blk_alloc_devt() wasn't synchronized against lookup
and removal, and its limit check was off by one - 1 << MINORBITS is
the number of minors allowed, not the maximum allowed minor.

Add locking and rename MAX_EXT_DEVT to NR_EXT_DEVT and fix limit
checking.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoidr: fix a subtle bug in idr_get_next()
Tejun Heo [Thu, 28 Feb 2013 01:03:34 +0000 (17:03 -0800)]
idr: fix a subtle bug in idr_get_next()

commit 6cdae7416a1c45c2ce105a78187d9b7e8feb9e24 upstream.

The iteration logic of idr_get_next() is borrowed mostly verbatim from
idr_for_each().  It walks down the tree looking for the slot matching
the current ID.  If the matching slot is not found, the ID is
incremented by the distance of single slot at the given level and
repeats.

The implementation assumes that during the whole iteration id is aligned
to the layer boundaries of the level closest to the leaf, which is true
for all iterations starting from zero or an existing element and thus is
fine for idr_for_each().

However, idr_get_next() may be given any point and if the starting id
hits in the middle of a non-existent layer, increment to the next layer
will end up skipping the same offset into it.  For example, an IDR with
IDs filled between [64, 127] would look like the following.

          [  0  64 ... ]
       /----/   |
       |        |
      NULL    [ 64 ... 127 ]

If idr_get_next() is called with 63 as the starting point, it will try
to follow down the pointer from 0.  As it is NULL, it will then try to
proceed to the next slot in the same level by adding the slot distance
at that level which is 64 - making the next try 127.  It goes around the
loop and finds and returns 127 skipping [64, 126].

Note that this bug also triggers in idr_for_each_entry() loop which
deletes during iteration as deletions can make layers go away leaving
the iteration with unaligned ID into missing layers.

Fix it by ensuring proceeding to the next slot doesn't carry over the
unaligned offset - ie.  use round_up(id + 1, slot_distance) instead of
id += slot_distance.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Teigland <teigland@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoxen/blkback: Don't trust the handle from the frontend.
Konrad Rzeszutek Wilk [Wed, 16 Jan 2013 16:36:23 +0000 (11:36 -0500)]
xen/blkback: Don't trust the handle from the frontend.

commit 01c681d4c70d64cb72142a2823f27c4146a02e63 upstream.

The 'handle' is the device that the request is from. For the life-time
of the ring we copy it from a request to a response so that the frontend
is not surprised by it. But we do not need it - when we start processing
I/Os we have our own 'struct phys_req' which has only most essential
information about the request. In fact the 'vbd_translate' ends up
over-writing the preq.dev with a value from the backend.

This assignment of preq.dev with the 'handle' value is superfluous
so lets not do it.

Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoxen-blkback: do not leak mode property
Jan Beulich [Thu, 20 Dec 2012 10:31:11 +0000 (10:31 +0000)]
xen-blkback: do not leak mode property

commit 9d092603cc306ee6edfe917bf9ab8beb5f32d7bc upstream.

"be->mode" is obtained from xenbus_read(), which does a kmalloc() for
the message body. The short string is never released, so do it along
with freeing "be" itself, and make sure the string isn't kept when
backend_changed() doesn't complete successfully (which made it
desirable to slightly re-structure that function, so that the error
cleanup can be done in one place).

Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoblock: fix ext_devt_idr handling
Tomas Henzl [Thu, 28 Feb 2013 01:03:32 +0000 (17:03 -0800)]
block: fix ext_devt_idr handling

commit 7b74e912785a11572da43292786ed07ada7e3e0c upstream.

While adding and removing a lot of disks disks and partitions this
sometimes shows up:

  WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted)
  Hardware name:
  sysfs: cannot create duplicate filename '/dev/block/259:751'
  Modules linked in: raid1 autofs4 bnx2fc cnic uio fcoe libfcoe libfc 8021q scsi_transport_fc scsi_tgt garp stp llc sunrpc cpufreq_ondemand powernow_k8 freq_table mperf ipv6 dm_mirror dm_region_hash dm_log power_meter microcode dcdbas serio_raw amd64_edac_mod edac_core edac_mce_amd i2c_piix4 i2c_core k10temp bnx2 sg ixgbe dca mdio ext4 mbcache jbd2 dm_round_robin sr_mod cdrom sd_mod crc_t10dif ata_generic pata_acpi pata_atiixp ahci mptsas mptscsih mptbase scsi_transport_sas dm_multipath dm_mod [last unloaded: scsi_wait_scan]
  Pid: 44103, comm: async/16 Not tainted 2.6.32-195.el6.x86_64 #1
  Call Trace:
    warn_slowpath_common+0x87/0xc0
    warn_slowpath_fmt+0x46/0x50
    sysfs_add_one+0xc9/0x130
    sysfs_do_create_link+0x12b/0x170
    sysfs_create_link+0x13/0x20
    device_add+0x317/0x650
    idr_get_new+0x13/0x50
    add_partition+0x21c/0x390
    rescan_partitions+0x32b/0x470
    sd_open+0x81/0x1f0 [sd_mod]
    __blkdev_get+0x1b6/0x3c0
    blkdev_get+0x10/0x20
    register_disk+0x155/0x170
    add_disk+0xa6/0x160
    sd_probe_async+0x13b/0x210 [sd_mod]
    add_wait_queue+0x46/0x60
    async_thread+0x102/0x250
    default_wake_function+0x0/0x20
    async_thread+0x0/0x250
    kthread+0x96/0xa0
    child_rip+0xa/0x20
    kthread+0x0/0xa0
    child_rip+0x0/0x20

This most likely happens because dev_t is freed while the number is
still used and idr_get_new() is not protected on every use.  The fix
adds a mutex where it wasn't before and moves the dev_t free function so
it is called after device del.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoocfs2: ac->ac_allow_chain_relink=0 won't disable group relink
Xiaowei.Hu [Thu, 28 Feb 2013 01:02:49 +0000 (17:02 -0800)]
ocfs2: ac->ac_allow_chain_relink=0 won't disable group relink

commit 309a85b6861fedbb48a22d45e0e079d1be993b3a upstream.

ocfs2_block_group_alloc_discontig() disables chain relink by setting
ac->ac_allow_chain_relink = 0 because it grabs clusters from multiple
cluster groups.

It doesn't keep the credits for all chain relink,but
ocfs2_claim_suballoc_bits overrides this in this call trace:
ocfs2_block_group_claim_bits()->ocfs2_claim_clusters()->
__ocfs2_claim_clusters()->ocfs2_claim_suballoc_bits()
ocfs2_claim_suballoc_bits set ac->ac_allow_chain_relink = 1; then call
ocfs2_search_chain() one time and disable it again, and then we run out
of credits.

Fix is to allow relink by default and disable it in
ocfs2_block_group_alloc_discontig.

Without this patch, End-users will run into a crash due to run out of
credits, backtrace like this:

  RIP: 0010:[<ffffffffa0808b14>]  [<ffffffffa0808b14>]
  jbd2_journal_dirty_metadata+0x164/0x170 [jbd2]
  RSP: 0018:ffff8801b919b5b8  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff88022139ddc0 RCX: ffff880159f652d0
  RDX: ffff880178aa3000 RSI: ffff880159f652d0 RDI: ffff880087f09bf8
  RBP: ffff8801b919b5e8 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000001e00 R11: 00000000000150b0 R12: ffff880159f652d0
  R13: ffff8801a0cae908 R14: ffff880087f09bf8 R15: ffff88018d177800
  FS:  00007fc9b0b6b6e0(0000) GS:ffff88022fd40000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 000000000040819c CR3: 0000000184017000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process dd (pid: 9945, threadinfo ffff8801b919a000, task ffff880149a264c0)
  Call Trace:
    ocfs2_journal_dirty+0x2f/0x70 [ocfs2]
    ocfs2_relink_block_group+0x111/0x480 [ocfs2]
    ocfs2_search_chain+0x455/0x9a0 [ocfs2]
    ...

Signed-off-by: Xiaowei.Hu <xiaowei.hu@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoocfs2: fix ocfs2_init_security_and_acl() to initialize acl correctly
Jeff Liu [Thu, 28 Feb 2013 01:02:48 +0000 (17:02 -0800)]
ocfs2: fix ocfs2_init_security_and_acl() to initialize acl correctly

commit 32918dd9f19e5960af4cdfa41190bb843fb2247b upstream.

We need to re-initialize the security for a new reflinked inode with its
parent dirs if it isn't specified to be preserved for ocfs2_reflink().
However, the code logic is broken at ocfs2_init_security_and_acl()
although ocfs2_init_security_get() succeed.  As a result,
ocfs2_acl_init() does not involked and therefore the default ACL of
parent dir was missing on the new inode.

Note this was introduced by 9d8f13ba3 ("security: new
security_inode_init_security API adds function callback")

To reproduce:

    set default ACL for the parent dir(ocfs2 in this case):
    $ setfacl -m default:user:jeff:rwx ../ocfs2/
    $ getfacl ../ocfs2/
    # file: ../ocfs2/
    # owner: jeff
    # group: jeff
    user::rwx
    group::r-x
    other::r-x
    default:user::rwx
    default:user:jeff:rwx
    default:group::r-x
    default:mask::rwx
    default:other::r-x

    $ touch a
    $ getfacl a
    # file: a
    # owner: jeff
    # group: jeff
    user::rw-
    group::rw-
    other::r--

Before patching, create reflink file b from a, the user
default ACL entry(user:jeff:rwx)was missing:

    $ ./ocfs2_reflink a b
    $ getfacl b
    # file: b
    # owner: jeff
    # group: jeff
    user::rw-
    group::rw-
    other::r--

In this case, the end user can also observed an error message at syslog:

  (ocfs2_reflink,3229,2):ocfs2_init_security_and_acl:7193 ERROR: status = 0

After applying this patch, create reflink file c from a:

    $ ./ocfs2_reflink a c
    $ getfacl c
    # file: c
    # owner: jeff
    # group: jeff
    user::rw-
    user:jeff:rwx #effective:rw-
    group::r-x #effective:r--
    mask::rw-
    other::r--

Test program:
/* Usage: reflink <source> <dest> */
#include <stdio.h>
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>

static int
reflink_file(char const *src_name, char const *dst_name,
     bool preserve_attrs)
{
int fd;

#ifndef REFLINK_ATTR_NONE
#  define REFLINK_ATTR_NONE 0
#endif
#ifndef REFLINK_ATTR_PRESERVE
#  define REFLINK_ATTR_PRESERVE 1
#endif
#ifndef OCFS2_IOC_REFLINK
struct reflink_arguments {
uint64_t old_path;
uint64_t new_path;
uint64_t preserve;
};

#  define OCFS2_IOC_REFLINK _IOW ('o', 4, struct reflink_arguments)
#endif
struct reflink_arguments args = {
.old_path = (unsigned long) src_name,
.new_path = (unsigned long) dst_name,
.preserve = preserve_attrs ? REFLINK_ATTR_PRESERVE :
     REFLINK_ATTR_NONE,
};

fd = open(src_name, O_RDONLY);
if (fd < 0) {
fprintf(stderr, "Failed to open %s: %s\n",
src_name, strerror(errno));
return -1;
}

if (ioctl(fd, OCFS2_IOC_REFLINK, &args) < 0) {
fprintf(stderr, "Failed to reflink %s to %s: %s\n",
src_name, dst_name, strerror(errno));
return -1;
}
}

int
main(int argc, char *argv[])
{
if (argc != 3) {
fprintf(stdout, "Usage: %s source dest\n", argv[0]);
return 1;
}

return reflink_file(argv[1], argv[2], 0);
}

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoocfs2: fix possible use-after-free with AIO
Jan Kara [Wed, 20 Feb 2013 02:16:39 +0000 (13:16 +1100)]
ocfs2: fix possible use-after-free with AIO

commit 9b171e0c74ca0549d0610990a862dd895870f04a upstream.

Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agotarget: Add missing mapped_lun bounds checking during make_mappedlun setup
Nicholas Bellinger [Tue, 19 Feb 2013 02:31:37 +0000 (18:31 -0800)]
target: Add missing mapped_lun bounds checking during make_mappedlun setup

commit fbbf8555a986ed31e54f006b6cc637ea4ff1425b upstream.

This patch adds missing bounds checking for the configfs provided
mapped_lun value during target_fabric_make_mappedlun() setup ahead
of se_lun_acl initialization.

This addresses a potential OOPs when using a mapped_lun value that
exceeds the hardcoded TRANSPORT_MAX_LUNS_PER_TPG-1 value within
se_node_acl->device_list[].

Reported-by: Jan Engelhardt <jengelh@inai.de>
Cc: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agotarget: Fix lookup of dynamic NodeACLs during cached demo-mode operation
Nicholas Bellinger [Tue, 19 Feb 2013 02:00:33 +0000 (18:00 -0800)]
target: Fix lookup of dynamic NodeACLs during cached demo-mode operation

commit fcf29481fb8e106daad6688f2e898226ee928992 upstream.

This patch fixes a bug in core_tpg_check_initiator_node_acl() ->
core_tpg_get_initiator_node_acl() where a dynamically created
se_node_acl generated during session login would be skipped during
subsequent lookup due to the '!acl->dynamic_node_acl' check, causing
a new se_node_acl to be created with a duplicate ->initiatorname.

This would occur when a fabric endpoint was configured with
TFO->tpg_check_demo_mode()=1 + TPF->tpg_check_demo_mode_cache()=1
preventing the release of an existing se_node_acl during se_session
shutdown.

Also, drop the unnecessary usage of core_tpg_get_initiator_node_acl()
within core_dev_init_initiator_node_lun_acl() that originally
required the extra '!acl->dynamic_node_acl' check, and just pass
the configfs provided se_node_acl pointer instead.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agox86: Make sure we can boot in the case the BDA contains pure garbage
H. Peter Anvin [Wed, 27 Feb 2013 20:46:40 +0000 (12:46 -0800)]
x86: Make sure we can boot in the case the BDA contains pure garbage

commit 7c10093692ed2e6f318387d96b829320aa0ca64c upstream.

On non-BIOS platforms it is possible that the BIOS data area contains
garbage instead of being zeroed or something equivalent (firmware
people: we are talking of 1.5K here, so please do the sane thing.)

We need on the order of 20-30K of low memory in order to boot, which
may grow up to < 64K in the future.  We probably want to avoid the
lowest of the low memory.  At the same time, it seems extremely
unlikely that a legitimate EBDA would ever reach down to the 128K
(which would require it to be over half a megabyte in size.)  Thus,
pick 128K as the cutoff for "this is insane, ignore."  We may still
end up reserving a bunch of extra memory on the low megabyte, but that
is not really a major issue these days.  In the worst case we lose
512K of RAM.

This code really should be merged with trim_bios_range() in
arch/x86/kernel/setup.c, but that is a bigger patch for a later merge
window.

Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/n/tip-oebml055yyfm8yxmria09rja@git.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agodoc, kernel-parameters: Document 'console=hvc<n>'
Konrad Rzeszutek Wilk [Mon, 25 Feb 2013 20:54:09 +0000 (15:54 -0500)]
doc, kernel-parameters: Document 'console=hvc<n>'

commit a2fd6419174470f5ae6383f5037d0ee21ed9833f upstream.

Both the PowerPC hypervisor and Xen hypervisor can utilize the
hvc driver.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1361825650-14031-3-git-send-email-konrad.wilk@oracle.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agodoc, xen: Mention 'earlyprintk=xen' in the documentation.
Konrad Rzeszutek Wilk [Mon, 25 Feb 2013 20:54:08 +0000 (15:54 -0500)]
doc, xen: Mention 'earlyprintk=xen' in the documentation.

commit 2482a92e7d17187301d7313cfe5021b13393a0b4 upstream.

The earlyprintk for Xen PV guests utilizes a simple hypercall
(console_io) to provide output to Xen emergency console.

Note that the Xen hypervisor should be booted with 'loglevel=all'
to output said information.

Reported-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1361825650-14031-2-git-send-email-konrad.wilk@oracle.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agox86, efi: Make "noefi" really disable EFI runtime serivces
Matt Fleming [Wed, 20 Feb 2013 20:36:12 +0000 (20:36 +0000)]
x86, efi: Make "noefi" really disable EFI runtime serivces

commit fb834c7acc5e140cf4f9e86da93a66de8c0514da upstream.

commit 1de63d60cd5b ("efi: Clear EFI_RUNTIME_SERVICES rather than
EFI_BOOT by "noefi" boot parameter") attempted to make "noefi" true to
its documentation and disable EFI runtime services to prevent the
bricking bug described in commit e0094244e41c ("samsung-laptop:
Disable on EFI hardware"). However, it's not possible to clear
EFI_RUNTIME_SERVICES from an early param function because
EFI_RUNTIME_SERVICES is set in efi_init() *after* parse_early_param().

This resulted in "noefi" effectively becoming a no-op and no longer
providing users with a way to disable EFI, which is bad for those
users that have buggy machines.

Reported-by: Walt Nelson Jr <walt0924@gmail.com>
Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1361392572-25657-1-git-send-email-matt@console-pimps.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoftrace: Call ftrace cleanup module notifier after all other notifiers
Steven Rostedt (Red Hat) [Wed, 13 Feb 2013 20:18:38 +0000 (15:18 -0500)]
ftrace: Call ftrace cleanup module notifier after all other notifiers

commit 8c189ea64eea01ca20d102ddb74d6936dd16c579 upstream.

Commit: c1bf08ac "ftrace: Be first to run code modification on modules"

changed ftrace module notifier's priority to INT_MAX in order to
process the ftrace nops before anything else could touch them
(namely kprobes). This was the correct thing to do.

Unfortunately, the ftrace module notifier also contains the ftrace
clean up code. As opposed to the set up code, this code should be
run *after* all the module notifiers have run in case a module is doing
correct clean-up and unregisters its ftrace hooks. Basically, ftrace
needs to do clean up on module removal, as it needs to know about code
being removed so that it doesn't try to modify that code. But after it
removes the module from its records, if a ftrace user tries to remove
a probe, that removal will fail due as the record of that code segment
no longer exists.

Nothing really bad happens if the probe removal is called after ftrace
did the clean up, but the ftrace removal function will return an error.
Correct code (such as kprobes) will produce a WARN_ON() if it fails
to remove the probe. As people get annoyed by frivolous warnings, it's
best to do the ftrace clean up after everything else.

By splitting the ftrace_module_notifier into two notifiers, one that
does the module load setup that is run at high priority, and the other
that is called for module clean up that is run at low priority, the
problem is solved.

Reported-by: Frank Ch. Eigler <fche@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoposix-timer: Don't call idr_find() with out-of-range ID
Tejun Heo [Wed, 20 Feb 2013 23:24:12 +0000 (15:24 -0800)]
posix-timer: Don't call idr_find() with out-of-range ID

commit e182bb38d7db7494fa5dcd82da17fe0dedf60ecf upstream.

When idr_find() was fed a negative ID, it used to look up the ID
ignoring the sign bit before recent ("idr: remove MAX_IDR_MASK and
move left MAX_IDR_* into idr.c") patch. Now a negative ID triggers
a WARN_ON_ONCE().

__lock_timer() feeds timer_id from userland directly to idr_find()
without sanitizing it which can trigger the above malfunctions.  Add a
range check on @timer_id before invoking idr_find() in __lock_timer().

While timer_t is defined as int by all archs at the moment, Andrew
worries that it may be defined as a larger type later on.  Make the
test cover larger integers too so that it at least is guaranteed to
not return the wrong timer.

Note that WARN_ON_ONCE() in idr_find() on id < 0 is transitional
precaution while moving away from ignoring MSB.  Once it's gone we can
remove the guard as long as timer_t isn't larger than int.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20130220232412.GL3570@htj.dyndns.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoiommu/amd: Initialize device table after dma_ops
Joerg Roedel [Wed, 6 Feb 2013 11:55:23 +0000 (12:55 +0100)]
iommu/amd: Initialize device table after dma_ops

commit f528d980c17b8714aedc918ba86e058af914d66b upstream.

When dma_ops are initialized the unity mappings are
created. The init_device_table_dma() function makes sure DMA
from all devices is blocked by default. This opens a short
window in time where DMA to unity mapped regions is blocked
by the IOMMU. Make sure this does not happen by initializing
the device table after dma_ops.

Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoquota: autoload the quota_v2 module for QFMT_VFS_V1 quota format
Theodore Ts'o [Fri, 25 Jan 2013 04:24:56 +0000 (23:24 -0500)]
quota: autoload the quota_v2 module for QFMT_VFS_V1 quota format

commit c3ad83d9efdfe6a86efd44945a781f00c879b7b4 upstream.

Otherwise, ext4 file systems with the quota featured enable will get a
very confusing "No such process" error message if the quota code is
built as a module and the quota_v2 module has not been loaded.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoALSA: hda - hdmi: Make jacks phantom, if they're not detectable
David Henningsson [Fri, 22 Feb 2013 09:16:28 +0000 (10:16 +0100)]
ALSA: hda - hdmi: Make jacks phantom, if they're not detectable

commit 30efd8debd1ef30be342d374f01e993509f5b76b upstream.

Just as for analog codecs, a jack that isn't suitable for detection
(in this case, NO_PRESENCE was set) should be a phantom Jack
instead of a normal one.

Thanks to Raymond Yau for spotting.

BugLink: https://bugs.launchpad.net/bugs/961286
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=903869
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoLinux 3.4.34
Greg Kroah-Hartman [Thu, 28 Feb 2013 15:01:22 +0000 (07:01 -0800)]
Linux 3.4.34

4 years agoUSB: usb-storage: unusual_devs update for Super TOP SATA bridge
Josh Boyer [Thu, 14 Feb 2013 14:39:09 +0000 (09:39 -0500)]
USB: usb-storage: unusual_devs update for Super TOP SATA bridge

commit 18e03310b5caa6d11c1a8c61b982c37047693fba upstream.

The current entry in unusual_cypress.h for the Super TOP SATA bridge devices
seems to be causing corruption on newer revisions of this device.  This has
been reported in Arch Linux and Fedora.  The original patch was tested on
devices with bcdDevice of 1.60, whereas the newer devices report bcdDevice
as 2.20.  Limit the UNUSUAL_DEV entry to devices less than 2.20.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=909591

The Arch Forum post on this is here:
https://bbs.archlinux.org/viewtopic.php?id=152011

Reported-by: Carsten S. <carsteniq@yahoo.com>
Tested-by: Carsten S. <carsteniq@yahoo.com>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoUSB: storage: properly handle the endian issues of idProduct
fangxiaozhi [Thu, 7 Feb 2013 07:32:07 +0000 (15:32 +0800)]
USB: storage: properly handle the endian issues of idProduct

commit cd060956c5e97931c3909e4a808508469c0bb9f6 upstream.

1. The idProduct is little endian, so make sure its value to be
compatible with the current CPU. Make no break on big endian processors.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoUSB: ehci-omap: Fix autoloading of module
Roger Quadros [Thu, 14 Feb 2013 15:08:09 +0000 (17:08 +0200)]
USB: ehci-omap: Fix autoloading of module

commit 04753523266629b1cd0518091da1658755787198 upstream.

The module alias should be "ehci-omap" and not
"omap-ehci" to match the platform device name.
The omap-ehci module should now autoload correctly.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoUSB: option: add Huawei "ACM" devices using protocol = vendor
Bjørn Mork [Wed, 13 Feb 2013 22:41:34 +0000 (23:41 +0100)]
USB: option: add Huawei "ACM" devices using protocol = vendor

commit 1f3f687722fd9b29a0c2a85b4844e3b2a3585c63 upstream.

The USB device descriptor of one identity presented by a few
Huawei morphing devices have serial functions with class codes
02/02/ff, indicating CDC ACM with a vendor specific protocol. This
combination is often used for MSFT RNDIS functions, and the CDC
ACM class driver will therefore ignore such functions.

The CDC ACM class driver cannot support functions with only 2
endpoints.  The underlying serial functions of these modems are
also believed to be the same as for alternate device identities
already supported by the option driver. Letting the same driver
handle these functions independently of the current identity
ensures consistent handling and user experience.

There is no need to blacklist these devices in the rndis_host
driver. Huawei serial functions will either have only 2 endpoints
or a CDC ACM functional descriptor with bmCapabilities != 0, making
them correctly ignored as "non RNDIS" by that driver.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoUSB: option: add Yota / Megafon M100-1 4g modem
Bjørn Mork [Tue, 12 Feb 2013 12:42:24 +0000 (13:42 +0100)]
USB: option: add Yota / Megafon M100-1 4g modem

commit cd565279e51bedee1b2988e84f9b3bef485adeb6 upstream.

Interface layout:

 00 CD-ROM
 01 debug COM port
 02 AP control port
 03 modem
 04 usb-ethernet

Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0408 ProdID=ea42 Rev= 0.00
S:  Manufacturer=Qualcomm, Incorporated
S:  Product=Qualcomm CDMA Technologies MSM
S:  SerialNumber=353568051xxxxxx
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoUSB: option: add and update Alcatel modems
Bjørn Mork [Wed, 23 Jan 2013 09:44:36 +0000 (10:44 +0100)]
USB: option: add and update Alcatel modems

commit f8f0302bbcbd1b14655bef29f6996a2152be559d upstream.

Adding three currently unsupported modems based on information
from .inf driver files:

  Diag  VID_1BBB&PID_0052&MI_00
  AGPS  VID_1BBB&PID_0052&MI_01
  VOICE VID_1BBB&PID_0052&MI_02
  AT    VID_1BBB&PID_0052&MI_03
  Modem VID_1BBB&PID_0052&MI_05
  wwan  VID_1BBB&PID_0052&MI_06

  Diag  VID_1BBB&PID_00B6&MI_00
  AT    VID_1BBB&PID_00B6&MI_01
  Modem VID_1BBB&PID_00B6&MI_02
  wwan  VID_1BBB&PID_00B6&MI_03

  Diag  VID_1BBB&PID_00B7&MI_00
  AGPS  VID_1BBB&PID_00B7&MI_01
  VOICE VID_1BBB&PID_00B7&MI_02
  AT    VID_1BBB&PID_00B7&MI_03
  Modem VID_1BBB&PID_00B7&MI_04
  wwan  VID_1BBB&PID_00B7&MI_05

Updating the blacklist info for the X060S_X200 and X220_X500D,
reserving interfaces for a wwan driver, based on

  wwan VID_1BBB&PID_0000&MI_04
  wwan VID_1BBB&PID_0017&MI_06

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agodca: check against empty dca_domains list before unregister provider
Maciej Sosnowski [Wed, 23 May 2012 15:27:07 +0000 (17:27 +0200)]
dca: check against empty dca_domains list before unregister provider

commit c419fcfd071cf34ba00f9f65282583772d2655e7 upstream.

When providers get blocked unregister_dca_providers() is called ending up
with dca_providers and dca_domain lists emptied. Dca should be prevented from
trying to unregister any provider if dca_domain list is found empty.

Reported-by: Jiang Liu <jiang.liu@huawei.com>
Tested-by: Gaohuai Han <hangaohuai@huawei.com>
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <djbw@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agovlan: adjust vlan_set_encap_proto() for its callers
Cong Wang [Thu, 21 Feb 2013 23:32:27 +0000 (23:32 +0000)]
vlan: adjust vlan_set_encap_proto() for its callers

[ Upstream commit da8c87241c26aac81a64c7e4d21d438a33018f4e ]

There are two places to call vlan_set_encap_proto():
vlan_untag() and __pop_vlan_tci().

vlan_untag() assumes skb->data points after mac addr, otherwise
the following code

        vhdr = (struct vlan_hdr *) skb->data;
        vlan_tci = ntohs(vhdr->h_vlan_TCI);
        __vlan_hwaccel_put_tag(skb, vlan_tci);

        skb_pull_rcsum(skb, VLAN_HLEN);

won't be correct. But __pop_vlan_tci() assumes points _before_
mac addr.

In vlan_set_encap_proto(), it looks for some magic L2 value
after mac addr:

        rawp = skb->data;
        if (*(unsigned short *) rawp == 0xFFFF)
...

Therefore __pop_vlan_tci() is obviously wrong.

A quick fix is avoiding using skb->data in vlan_set_encap_proto(),
use 'vhdr+1' is always correct in both cases.

Signed-off-by: Cong Wang <amwang@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jesse Gross <jesse@nicira.com>
Acked-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agosock_diag: Fix out-of-bounds access to sock_diag_handlers[]
Mathias Krause [Sat, 23 Feb 2013 01:13:47 +0000 (01:13 +0000)]
sock_diag: Fix out-of-bounds access to sock_diag_handlers[]

[ Upstream commit 6e601a53566d84e1ffd25e7b6fe0b6894ffd79c0 ]

Userland can send a netlink message requesting SOCK_DIAG_BY_FAMILY
with a family greater or equal then AF_MAX -- the array size of
sock_diag_handlers[]. The current code does not test for this
condition therefore is vulnerable to an out-of-bound access opening
doors for a privilege escalation.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoipv6: use a stronger hash for tcp
Eric Dumazet [Thu, 21 Feb 2013 12:18:52 +0000 (12:18 +0000)]
ipv6: use a stronger hash for tcp

[ Upstream commit 08dcdbf6a7b9d14c2302c5bd0c5390ddf122f664 ]

It looks like its possible to open thousands of TCP IPv6
sessions on a server, all landing in a single slot of TCP hash
table. Incoming packets have to lookup sockets in a very
long list.

We should hash all bits from foreign IPv6 addresses, using
a salt and hash mix, not a simple XOR.

inet6_ehashfn() can also separately use the ports, instead
of xoring them.

Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4 years agoipv4: fix a bug in ping_err().
Li Wei [Thu, 21 Feb 2013 00:09:54 +0000 (00:09 +0000)]
ipv4: fix a bug in ping_err().

[ Upstream commit b531ed61a2a2a77eeb2f7c88b49aa5ec7d9880d8 ]

We should get 'type' and 'code' from the outer ICMP header.

Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>