rowboat:dvachevs-dvachevs-u-boot.git
2011-10-31 Goutam KumarAM33XX GPEVM: Set default board as GP EVM. int_am335xpsp_04.06.00.01-v2011.09
2011-10-31 Joel A Fernandestps65217: Disable frequency switch when no AC power...
2011-10-31 Chase Maupinam335x_evm: change default ip_method to dhcp
2011-10-31 Greg GuyotteUse EEPROM to select board for PMIC code
2011-10-31 Tom Riniam335x: Bring back 10M mode for pre-A3 BeagleBone
2011-10-31 Steve Kipiszam335x-evm: Enable MII mode for BeagleBone Rev A3
2011-10-31 Joel A Fernandesam335x-evm: Read name field in EEPROM header for Beagle...
2011-10-31 Jason Kridneram335x_evm: single-byte address EEPROM for board identifier
2011-10-31 Greg GuyotteSet LDO3 and LDO4 output voltage to 3.3v on Bone
2011-10-31 Greg GuyotteAdd BeagleBone 720MHz support
2011-10-31 Tom Riniam335x: Correct comment about CONFIG_SYS_TEXT_BASE
2011-10-25 Goutam KumarFASTBOOT: Support is enabled for OMAP3EVM/AM37XEVM
2011-10-25 Goutam KumarAndroid: Use arm-eabi-ld.bfd linker to build u-boot
2011-10-25 Goutam KumarFASTBOOT: Compilation error correction
2011-10-25 Prashantha... Added MUSB support for AM335X
2011-10-25 Afzal MohammedFASTBOOT: Housekeeping
2011-10-25 Afzal MohammedFASTBOOT: Resolved issue with reconnecting cable
2011-10-25 Afzal MohammedFASTBOOT: AM35X support added
2011-10-25 Afzal MohammedFASTBOOT: Resolve compiler error when compiling MUSB...
2011-10-25 Afzal MohammedFASTBOOT: Copyright updated
2011-10-25 Afzal MohammedFASTBOOT: Device made to get enumerated as HS if host...
2011-10-25 Afzal MohammedFASTBOOT: Fastboot using MUSB made HS capable
2011-10-25 Afzal MohammedFASTBOOT: Combine different instances of FASTBOOT_RESPO...
2011-10-25 Afzal MohammedFASTBOOT: Revert data toggling for MUSB UDC
2011-10-25 Afzal MohammedFASTBOOT: OMAP3EVM: Use partition name and product...
2011-10-25 Afzal MohammedFASTBOOT: Use macros for EP numbers/index
2011-10-25 Afzal MohammedFASTBOOT: Cleanup
2011-10-25 Afzal MohammedFASTBOOT: Incorporated fastboot upload capability
2011-10-25 Afzal MohammedFASTBOOT: Added fastboot command - boot
2011-10-25 Afzal MohammedFASTBOOT: Added fastboot commands - reboot & continue
2011-10-25 Afzal MohammedFASTBOOT: Handle other "fastboot getvar" commands
2011-10-25 Afzal MohammedFASTBOOT: Add capability to add partitions dynamically
2011-10-25 Afzal MohammedFASTBOOT: Remove board specific details from fastboot...
2011-10-25 Afzal MohammedFASTBOOT: Disable debug prints in MUSB UDC
2011-10-25 Afzal MohammedFASTBOOT: Revert changes done for testing
2011-10-25 Afzal MohammedFASTBOOT: fastboot flash command working
2011-10-25 Amit PundirFASTBOOT: fastboot erase working
2011-10-25 Afzal MohammedFASTBOOT: Incorporate erase and flash commands
2011-10-25 Afzal MohammedFASTBOOT: Disable debug prints in cmd_fastboot.c
2011-10-25 Afzal MohammedFASTBOOT: fastboot data download working
2011-10-25 Afzal MohammedFASBOOT: Disable debug prints in ep0.c
2011-10-25 Afzal MohammedFASTBOOT: Posion Rx URB buffer, remove code modificatio...
2011-10-25 Afzal MohammedFASTBOOT: Basic fastboot command communication working
2011-10-25 Afzal MohammedFASTBOOT: Handling recieve
2011-10-25 Afzal MohammedFASTBOOT: File "ep0.c" made verbose
2011-10-25 Afzal MohammedFASTBOOT: Modified usb serial driver to check MUSB...
2011-10-25 Afzal MohammedFASTBOOT: MUSB UDC getting enumerated in host PC
2011-10-25 Afzal MohammedFASBOOT: Initialize MUSB with fastboot cmd
2011-10-25 Afzal MohammedFASTBOOT: MUSB UDC enabled in OMAP3 EVM config option
2011-10-25 Afzal MohammedFASTBOOT: Add minimal macros, incorporate fastboot...
2011-10-21 Greg GuyotteCorrecting VDD1 voltage setting for 720MHz
2011-10-21 Vaibhav Bediaam335x: Correct the clock frequency for the timer
2011-10-20 Tom Riniam335x: Really correct NAND partiton layout
2011-10-20 Tom Riniam335x: Wrap spl_board_init in a CONFIG_SPL_BOARD_INIT...
2011-10-20 Greg GuyotteChange CPU to 720MHz and bump VDD1 to 1.26V
2011-10-20 Vaibhav HiremathAdd missing i2c0 pin mux configuration in spl_board_init
2011-10-19 Tom Riniam335x: Force 10Mbit ethernet on BeagleBone
2011-10-19 Tom Riniam335x: Update NAND related environmental variables
2011-10-19 Tom Riniam335x: Enable CONFIG_SPL_BOARD_INIT
2011-10-19 Tom RiniOMAP SPL: Add CONFIG_SPL_BOARD_INIT hook
2011-10-18 Vaibhav Bediaam335x: Remove NOP instructions in voltage scaling
2011-10-14 Tom RiniRevert "ti81xx: Add enable_cache() function"
2011-10-13 Tom Riniti8148: Re-enable ethernet support
2011-10-13 Tom Riniam335x: Correct evm_phy_init TLK110 message
2011-10-12 Tom Riniti81xx: Add enable_cache() function
2011-10-12 Tom Riniam335x: Clean up voltage changes
2011-10-12 Tom Riniam335x: Convert mpu voltage framework to SPL, make...
2011-10-12 Philip, AvinashAM335x: Corrected MPU voltage switching.
2011-10-12 Philip, AvinashAM335x: DDR for 266 MHz.
2011-10-12 Philip, AvinashAM335x: Support for MPU clock switch to 600MHz.
2011-10-12 Matt PorterSPL: Enable YMODEM support on BeagleBone and AM335x EVM
2011-10-12 Matt PorterSPL: Enable YMODEM support on AM3874/TI8148 EVM
2011-10-12 Matt PorterSPL: Add YMODEM over UART load support
2011-10-12 Joel A Fernandesam335x: Make ethernet work on both EVM and Bone
2011-10-12 Steven Kipiszam335x: Add pin mux profile for the BeagleBone
2011-10-12 Steve Kipiszarch-ti81xx: Turn on clocks for GPIO bank 0
2011-10-12 Tom Riniam335x: Add CMD_EXT2 when CONFIG_MMC is set
2011-10-12 Tom Riniam335x: Change evm_phy_init TLK110 test / print
2011-10-12 Tom Riniam335x: Clean up the config file, add uEnv.txt
2011-10-12 Tom Riniam335x: Drop CONFIG_DISPLAY_CHECKBOARD
2011-10-12 Tom Riniam335x evm: Switch to DEBUG, debug() and printf()
2011-10-11 Matt PorterSPL: Remove massive amount of pinmux data being allocat...
2011-10-11 Matt PorterSPL: Clean up ti8148 evm configuration
2011-10-11 Matt PorterSPL: Fix DRAM initialization on ti814x/am387x EVM
2011-10-11 Tom Riniti8148_evm: First pass at fixing build
2011-10-11 Tom Riniti81xx: SPL support
2011-10-11 Tom Riniam335x: Switch to GENERIC_MMC and OMAP_HSMMC
2011-10-11 Tom Riniam335x: Fix various warnings
2011-10-11 Tom RiniOMAP3 SPL: Provide weak omap_rev_string
2011-10-11 Chandan NathAM335X: CPSW autonegotiates to 10/100 mbps
2011-10-11 Philip, AvinashAM335x: FIX for I2C write of address length 1
2011-10-11 Hebbar, GururajaAM335X: provide proper fallback incase of failure
2011-10-11 Hebbar, GururajaAM335X: correct evm type defines
2011-10-11 Hebbar, GururajaAM335X: Removed unused ddr config file
2011-10-11 Hebbar, GururajaAM335X: correct spi 1 pin-mux
2011-10-11 Hebbar, GururajaAM335X: enable printf if in u-boot 2nd stage
2011-10-11 Hebbar, GururajaAM335X: Add debug print to display evm configuration
2011-10-11 Chandan NathAM335X: Remove extra cpsw pinmux config
2011-10-11 Chandan NathAM335X: Enable In Band mode in cpsw for 10 mbps
2011-10-11 Hebbar, GururajaAM335X: Enable multi-i2c support
next